QT 5.10 Cross Compilation raspberry Pi Issue cannot find crt1.o & cannot find -lm

[sefer]

Hi,

may you have to execute rsync on ~/raspi folder
raspberrypi.local is the ip of the pi3, example 192.168.1.10

mkdir sysroot sysroot/usr sysroot/opt
rsync -avz pi@raspberrypi.local:/lib sysroot
rsync -avz pi@raspberrypi.local:/usr/include sysroot/usr
rsync -avz pi@raspberrypi.local:/usr/lib sysroot/usr
rsync -avz pi@raspberrypi.local:/opt/vc sysroot/opt

[zhmh]

@qt_help as @sefer said the sysroot folder should be create and rsysc in the ~/raspi address

[ab_en]

Any known solutions to this? Why is rsync necessary for correct build?

[jsulm]

@ab_en said in QT 5.10 Cross Compilation raspberry Pi Issue cannot find crt1.o & cannot find -lm:

Why is rsync necessary for correct build?

To synchronise the sysroot (which is basically copy of the RPi file system).
Strictly speaking rsync is not necessary, you can simply copy the content of /usr from your RPi to your host machine. But rsync is convenient to synchronise the sysroot if you change something on RPi.

[ab_en]

@jsulm Ok! I was able to copy the the usr/ folder from the RPi and I got through that issue, but now it is saying the file or file format is not recognized:

> /home/abenezerargaw/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian-x64/bin/arm-linux-gnueabihf-g++ -mfloat-abi=hard --sysroot=/home/abenezerargaw/raspi/sysroot -Wl,-O1 -Wl,-rpath-link,/home/abenezerargaw/raspi/sysroot/opt/vc/lib -Wl,-rpath-link,/home/abenezerargaw/raspi/sysroot/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/home/abenezerargaw/raspi/sysroot/lib/arm-linux-gnueabihf -o verifyspec verifyspec.o      
> /home/abenezerargaw/raspi/sysroot/usr/lib/crt1.o: file not recognized: File format not recognized
> collect2: error: ld returned 1 exit status
> Makefile:68: recipe for target 'verifyspec' failed
> gmake: *** [verifyspec] Error 1
Note: Also available for Linux: linux-clang linux-icc

ERROR: Cannot compile a minimal program. The toolchain or QMakeSpec is broken.

I assume I would need to rebuild the file but I am unsure how to do this. Any suggestions or guidance? (the more detailed the better! -- Thank you in advance)

[ab_en]

@ab_en @sierdzio

[sierdzio]

@ab_en said in QT 5.10 Cross Compilation raspberry Pi Issue cannot find crt1.o & cannot find -lm:

raspbian-x64

Do you have 64b Raspbian installed on that RPi? If not, then you should not compile your Qt using 64b compiler.

[ab_en]

@sierdzio Yes, I am running Poky Yocto Project Distribution image for RPi4 64b

[ab_en]

@ab_en same issue persists if non 64b selected fyi

[Pablo J. Rogina]

@ab_en said in QT 5.10 Cross Compilation raspberry Pi Issue cannot find crt1.o & cannot find -lm:

Poky Yocto Project Distribution image for RPi4 64b

So are you sure the cross-compiler you use (i.e. ~/raspi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin/arm-linux-gnueabihf-) which seems to come from Rasbperry Foundation repo is Ok/compatible with such OS/distribution?