Is data received from serial port possible to view on two forms?

[JonB]

@J-Hilk
As per my previous, to help the user in this case you should change your 3rd param from Setup to setup anyway. Unless you want him to figure for himself (which would not be a bad idea, bit late now that I have spoken!) :)

[Shivam Sharma]

@J-Hilk everthing is error free except one, which I ain't undertsanding:

'Setup' does not name a type.

[J.Hilk]

@Shivam-Sharma
where ?
It should point you to a line

---

actually, remove the mainwindow.h include from setup
here

#include "setup.h"
#include "ui_setup.h"
#include <QSerialPort>
#include <QDebug>
#include <mainwindow.h>
#include <QSerialPortInfo>
#include <QFile>

and here

#ifndef SETUP_H
#define SETUP_H
#include <mainwindow.h>
#include <QDialog>

thats a circular include with your mainwindow.h were you include setup.h

[JonB]

@Shivam-Sharma
As @J-Hilk has said. And further to that: (unless a Qt expert contradicts me) you should never be including mainwindow.h into anything other than mainwindow.cpp and your main.cpp, not into any other UI stuff you define. Keeps it clean --- they should never need to know about your MainWindow class. This is true all over the place: a widget which accesses/opens a "child" widget should include that child's .h file, but the "child" widgets should never need to know about/include the .h file of other ("parent") widgets where they might be called from. At least usually.

[Shivam Sharma]

This post is deleted!

[Shivam Sharma]

@J-Hilk @JonB

Thank you so much guys. This really helped me. All the solutions that you'll constantly engaged me with really means a lot. Appreciate this.

[SGaist]

Hi,

One small addition, when passing QString around like that (but it is also valid for other classes), it's a good habit to use const references. This allows to avoid creating unneeded copies.

[Shivam Sharma]

@J-Hilk @JonB Hi guys. Need one more help. If i want to add a push button on the Setup form that connects and disconnects the serial data incoming on both the forms how could I do that.

This is the code for the push button, i can do it on the mainwindow form but unable to do it on the Setup form since it is not being able to access *serial.

Code:

void MainWindow::on_start_toggled(bool checked)
{
    ui->start->setText(ui->start->isChecked() ? "Connect" : "Disconnect");
    if (checked)
    {
        serial->close();
        ui->start->setStyleSheet(QString("QPushButton {background-color: rgb(115, 210, 22);}"));
    }
    else
    {
        ui->start->setStyleSheet(QString("QPushButton {background-color: red;}"));


           serial = new QSerialPort(this);
           serial = new QSerialPort(this);
           serial->setPortName("ttyUSB0");
           serial->setBaudRate(QSerialPort::Baud9600);
           serial->setDataBits(QSerialPort::Data8);
           serial->setParity(QSerialPort::NoParity);
           serial->setStopBits(QSerialPort::OneStop);
           serial->setFlowControl(QSerialPort::NoFlowControl);

           if( serial->open(QIODevice::ReadWrite))
            {
                qDebug()<<"Port Open OK";
                connect(serial, &QSerialPort::readyRead, this, &MainWindow::serialReceived);
            }
          else
            {
                qDebug()<<"Can't Open Port : " << serial->error();
            }
           serialReceived();
    }
}

[jsulm]

@Shivam-Sharma Create a signal in Setup, connect that signal to clicked() signal of the button in Setup and then connect the signal you created in Setup (the first one I mentioned) to a slot in MainWindow where you can enable/disable the serial port.

[Shivam Sharma]

I am sorry, but unable to understand. How do i connect the pushbutton to mainwindow from Setup form, since i cannot inherit the parent class, neither can i create an instance of it. Could you give a demo?

[jsulm]

@Shivam-Sharma said in Is data received from serial port possible to view on two forms?:

How do i connect the pushbutton to mainwindow from Setup form

You don't, please read more carefully.

class Setup
{
signals:
    void onOffSerialPort();
};

void Setup::Setup()
{
    connect(ui->button, &QPushButton::clicked, this, &Setup::onOffSerialButton);
}

// MainWindow
connect(setup, &Setup::onOffSerialButton, this, &MainWindow::onOffSerialButton);

As you can see Setup does not know anything about MainWindow.

[Shivam Sharma]

// MainWindow
connect(setup, &Setup::onOffSerialButton, this, &MainWindow::onOffSerialButton);

shouldn't all of this be

onOffSerialPort

and the last part be :

&MainWindow::close);

void Mainwindow::close()
{
serial->close();
}

[jsulm]

@Shivam-Sharma Sorry, I don't understand what you mean. The code I provided is just to show the idea, you need to adapt it to your needs.

[J.Hilk]

let me expand on @jsulm example

first of in your mainwindow, create a new function, defined as a slot

and copy the content of your on button clicked in there

public slots:
     void toggleSerial(bool checked);

//mainwindow.cpp
void MainWindow:: toggleSerial(bool checked)
{
      ui->start->setText(ui->start->isChecked() ? "Connect" : "Disconnect");
          if (checked)
          {
              serial->close();
              ui->start->setStyleSheet(QString("QPushButton {background-color: rgb(115, 210, 22);}"));
          }
          else
          {
              ui->start->setStyleSheet(QString("QPushButton {background-color: red;}"));
      
      
                 serial = new QSerialPort(this);
                 serial = new QSerialPort(this);
                 serial->setPortName("ttyUSB0");
                 serial->setBaudRate(QSerialPort::Baud9600);
                 serial->setDataBits(QSerialPort::Data8);
                 serial->setParity(QSerialPort::NoParity);
                 serial->setStopBits(QSerialPort::OneStop);
                 serial->setFlowControl(QSerialPort::NoFlowControl);
      
                 if( serial->open(QIODevice::ReadWrite))
                  {
                      qDebug()<<"Port Open OK";
                      connect(serial, &QSerialPort::readyRead, this, &MainWindow::serialReceived);
                  }
                else
                  {
                      qDebug()<<"Can't Open Port : " << serial->error();
                  }
                 serialReceived();
          }
}
void MainWindow::on_start_toggled(bool checked)
{
    toggleSerial(checked);
}

inside Setup add the signal like @jsulm suggested

signals:
    void onOffSerialPort(bool checked);

connect your button toggle signal (in Setup) to this signal (constructor of Setup

connect(ui->myButton, &QPushButton:: toggled, this, &Setup:: onOffSerialPort);

and finally
connect that onOffSerialPort signal to your toggleSerial slot

connect(setup, &Setup:: onOffSerialPort, this, &MainWindow:: toggleSerial);

one thing to keep in mind, your 2 buttons will now not necessarily show the correct checked status.

I'll let you figure that one out.

[Shivam Sharma]

Error: no member named start in ui::mainwindow,

that is because it isn't able to access the pushbutton from setup window. Help please.

Also:
void MainWindow::on_start_toggled(bool checked)
{
toggleSerial(checked);
}
this also has errors saying: on_start_toggled doesn't match any declaration.

[J.Hilk]

@Shivam-Sharma
where did you put this ?

public slots:
     void toggleSerial(bool checked);

in mainwindow.h or on setup.h ?

[Shivam Sharma]

in mainwindow.h

[jsulm]

@Shivam-Sharma said in Is data received from serial port possible to view on two forms?:

that is because it isn't able to access the pushbutton from setup window

I repeat it once more: YOU DO NOT HAVE TO ACCESS THIS BUTTON FROM MAIN WINDOW!
Please show your current code.

[Shivam Sharma]

//mainwindow.h

#ifndef MAINWINDOW_H
#define MAINWINDOW_H

#include <QMainWindow>
#include <info.h>
#include <setup.h>

QT_BEGIN_NAMESPACE
namespace Ui { class MainWindow; }
QT_END_NAMESPACE

class MainWindow : public QMainWindow
{
    Q_OBJECT

public:
    MainWindow(QWidget *parent = nullptr);
    ~MainWindow();
    Info *info;
    Setup *setup;

signals:
    void newSerialData(QString data);

public slots:
        void toggleSerial(bool checked);

private slots:
    void serialReceived();
    void on_infobutton_clicked();
    void on_setupbutton_clicked();

private:
    Ui::MainWindow *ui;

};
#endif // MAINWINDOW_H

//mainwindow.cpp

#include "mainwindow.h"
#include "ui_mainwindow.h"
#include <info.h>
#include <setup.h>

#include <QList>
#include <QComboBox>
#include <QString>
#include <QTextEdit>
#include <QTime>
#include <QDebug>
#include <QSerialPort>
#include <QtSerialPort/QSerialPortInfo>
#include <QFile>
#include <qmath.h>
#include <QList>

QSerialPort *serial;
QString line;
QString txt1;
MainWindow::MainWindow(QWidget *parent)
    : QMainWindow(parent)
    , ui(new Ui::MainWindow)
{
       ui->setupUi(this);
       connect(setup, &Setup::onOffSerialPort, this, &MainWindow::toggleSerial);
       serial = new QSerialPort(this);
       serial = new QSerialPort(this);
       serial->setPortName("ttyUSB0");
       serial->setBaudRate(QSerialPort::Baud9600);
       serial->setDataBits(QSerialPort::Data8);
       serial->setParity(QSerialPort::NoParity);
       serial->setStopBits(QSerialPort::OneStop);
       serial->setFlowControl(QSerialPort::NoFlowControl);

       if( serial->open(QIODevice::ReadWrite))
        {
            qDebug()<<"Port Open OK";
            connect(serial, &QSerialPort::readyRead, this, &MainWindow::serialReceived);
        }
      else
        {
            qDebug()<<"Can't Open Port : " << serial->error();
        }
       serialReceived();
}

MainWindow::~MainWindow()
{
    delete ui;
    serial->close();
}

char *get_field(char *str,int fld)
{
    static char t0[512];
    int i=0,j=0,k=0;
    while(i<512)
    {
        if(*(str+i) == ',' || *(str+i) == '\n')
        {
            if (fld==j) return t0;
                j++;
                t0[0]=0;
                k=0;
        }
        else
        {
            t0[k++]=*(str+i);
            t0[k]=0;
        }
        i++;
    }
        t0[0]=0;
        return t0;
}

int checksum_gps(char *str)
{
    unsigned char cs=0,sum=0,i=0;
    char sCS[8], exit =0;

    while (i<250 && !exit)
    {
        if(*(str+i) == '*')
        {
            sum=0;
            break;
        }
        if(sum)
            cs^=*(str+i);
        if(*(str+i) == '$')
            sum=1;
        if(*(str+i) == 0)
            exit=1;
        i++;
    }
    sprintf(sCS,"%02X",cs);
    if (memcmp(sCS,str+i+1,2)==0)
        return 1;
    return 0;
}

char *timestamp(void)
{
    static char t0[128];
    long ms;
    time_t now;
    struct tm *t;
    struct timespec spec;

    time(&now);
    t= localtime(&now);
    clock_gettime(CLOCK_REALTIME, &spec);
    ms= round(spec.tv_nsec/1.0e6);

    sprintf(t0, "%04d/%02d/%02d %02d:%02d:%02d.%03ld ",
            t->tm_year+1900, t->tm_mon+1, t->tm_mday,
            t->tm_hour, t->tm_min, t->tm_sec, ms);
    return t0;
}

void MainWindow::serialReceived()
{
    QByteArray serialData;
    serialData = serial->readAll();
    QString static receivedData = QString::fromStdString(serialData.toStdString());

    char t0[512];
    static char t1[512];
    static int wp=0;
    unsigned int i=0;

    QString filename="/home/user/Desktop/Programs/MainCBOT2/entrydata.txt";
    QFile file( filename );

    if(file.open(QIODevice::WriteOnly | QIODevice::Append | QIODevice::Text))
    {
        QTextStream stream( &file );
        strcpy(t0,serialData);
        for (i=0;i<strlen(t0);i++)
        {
            t1[wp++]=t0[i];
            wp%=512;
            t1[wp]=0;

            if(t0[i] == '\n')
            {
                wp=0;
                if(checksum_gps(t1))
                {
                    if(memcmp("$GPRMC",t1,6)==0)
                    {
                        unsigned int latcnt1=0, log_cnt1=0,spdcnt=0, cogcnt=0;
                        char cog[20];
                        char spd[20];
                        char lat1[20], lg1[20];
                        for(i=20;i<28;i++)
                        {
                            lat1[latcnt1++]=t1[i];
                        }
                        float j=atof(lat1);
                        float k=(int)(j/100);
                        float minlat  = j - ( k * 100 );
                        float ddeglat = k + ( minlat / 60 );
                        ui->latitude->setText(QString::number(ddeglat,'f'));

                        for(i=33;i<42;i++)
                        {
                            lg1[log_cnt1++]=t1[i];
                        }
                        float p=atof(lg1);
                        float q=(int)(p/100);
                        float minlong  = p - ( q * 100 );
                        float ddeglong = q + ( minlong / 60 );
                        ui->longitude->setText(QString::number(ddeglong,'f'));

                        for (i=45;i<50;i++)
                        {
                            spd[spdcnt++]=t1[i];
                        }
                        float r=atof(spd);
                        ui->speed->setText(QString::number(r,'f',4));

                        for (i=50;i<56;i++)
                        {
                            cog[cogcnt++]=t1[i];
                        }
                        float u=atof((cog));
                        float w=u*0.514444;
                        ui->cog->setText(QString::number(w,'f',4));

                        stream<<strcat(t1,timestamp());
                        ui->rece->setText(t1);
                        emit newSerialData(t1);
                        fflush(stdout);
                    }
                }
            }
        }
        file.close();
    }
    ui->timest->setText(timestamp());
}

void MainWindow::on_infobutton_clicked()
{
    info = new Info(this);
    info->show();
}

void MainWindow::on_setupbutton_clicked()
{
    setup = new Setup(this);
    setup->show();
    connect(this, &MainWindow::newSerialData, setup, &Setup::onNewSerialData);
}

void MainWindow:: toggleSerial(bool checked)
{
          ui->start->setText(ui->start->isChecked() ? "Connect" : "Disconnect");
          if (checked)
          {
              serial->close();
             ui->start->setStyleSheet(QString("QPushButton {background-color: rgb(115, 210, 22);}"));
          }
          else
          {
              ui->start->setStyleSheet(QString("QPushButton {background-color: red;}"));

                 serial = new QSerialPort(this);
                 serial = new QSerialPort(this);
                 serial->setPortName("ttyUSB0");
                 serial->setBaudRate(QSerialPort::Baud9600);
                 serial->setDataBits(QSerialPort::Data8);
                 serial->setParity(QSerialPort::NoParity);
                 serial->setStopBits(QSerialPort::OneStop);
                 serial->setFlowControl(QSerialPort::NoFlowControl);

                 if( serial->open(QIODevice::ReadWrite))
                  {
                      qDebug()<<"Port Open OK";
                      connect(serial, &QSerialPort::readyRead, this, &MainWindow::serialReceived);
                  }
                else
                  {
                      qDebug()<<"Can't Open Port : " << serial->error();
                  }
                 serialReceived();
          }
}

void MainWindow::on_start_toggled(bool checked)
{
    toggleSerial(checked);
}

//setup.h

#ifndef SETUP_H
#define SETUP_H
#include <QDialog>

namespace Ui {
class Setup;
}

class Setup : public QDialog
{
    Q_OBJECT

public:
    explicit Setup(QWidget *parent = nullptr);
    ~Setup();

public slots:
     void onNewSerialData(QString data);

signals:
      void onOffSerialPort(bool checked);

private:
    Ui::Setup *ui;
};

#endif // SETUP_H

//setup.cpp

#include "setup.h"
#include "ui_setup.h"
#include <QSerialPortInfo>
#include <QFile>
#include <QSerialPort>

Setup::Setup(QWidget *parent) :
    QDialog(parent),
    ui(new Ui::Setup)
{
    ui->setupUi(this);
    ui->start->setCheckable(true);
    connect(ui->start, &QPushButton::toggled, this, &Setup::onOffSerialPort);

    QList<QSerialPortInfo> list;
    list = QSerialPortInfo::availablePorts();

    for (int i= 0; i < list.length(); i++)
    {
        ui->comboBox->addItem(list[i].portName());
    }

    ui->baudratebox->setInsertPolicy(QComboBox::NoInsert);
    ui->baudratebox->addItem(QStringLiteral("9600"), QSerialPort::Baud9600);
    ui->baudratebox->addItem(QStringLiteral("19200"), QSerialPort::Baud19200);
    ui->baudratebox->addItem(QStringLiteral("38400"), QSerialPort::Baud38400);
    ui->baudratebox->addItem(QStringLiteral("115200"), QSerialPort::Baud115200);
}

Setup::~Setup()
{
    delete ui;
}

void Setup::onNewSerialData(QString data)
{
     ui->receiver->append(data);
}

[J.Hilk]

MainWindow::MainWindow(QWidget *parent)
    : QMainWindow(parent)
    , ui(new Ui::MainWindow)
{
       ui->setupUi(this);
       connect(setup, &Setup::onOffSerialPort, this, &MainWindow::toggleSerial);

the connect here is wrong, I think I said, you should place it where you create (new Setup(this)) the setup object.

that would be here

void MainWindow::on_setupbutton_clicked()
{
    setup = new Setup(this);
    setup->show();
    connect(this, &MainWindow::newSerialData, setup, &Setup::onNewSerialData);
}

Error: no member named start in ui::mainwindow,

We don't see the form (.ui) class of MainWindow did you change the object name of start there ?

---

Edit: you also removed the on_start_toggled declaration in MainWindow.h

you know what, the "ConnectByName" feature is crap anyway don't use it.
Remove on_start_toggled complete,
and add the following in the mainWindow constructor :

MainWindow::MainWindow(QWidget *parent)
    : QMainWindow(parent)
    , ui(new Ui::MainWindow)
{
       ui->setupUi(this);
       connect(ui->start, &QPushButton::toggled, this, &MainWindow::toggleSerial);