Showing a mp4 in my app

MichRX7

So, following this page for install directions on the vlc-qt: https://github.com/vlc-qt/vlc-qt/blob/master/BUILDING.md

It says for Linux:
Linux
Install requirements from your distribution's repository. Supported generators are make and ninja.

Make example:

$ mkdir build
$ cd build
$ cmake .. -DCMAKE_BUILD_TYPE=Debug
$ make -j8
$ make install

So, I go into the git debian directory because I believe my Rpi4 is running raspbian debian stretch. I then do the mkdir build and cd build so I'm in the build subdirectory of debian. I then use the following cmake command:
cmake -SYSTEM_QML -WITH_X11 -DCMAKE_BUILD_TYPE=Debug

And I get the following error:
CMake Error: The source directory "/home/pi/vlc-qt/debian/-dcmake_build_type=Debug" does not exist.
Specify --help for usage, or press the help button on the CMake GUI.

Was I supposed to put something else where the ".." is in the cmake directions?

jsulm

@MichRX7 You need to tell cmake where the source code is:

cmake PATH_TO_SRC -SYSTEM_QML -WITH_X11 -DCMAKE_BUILD_TYPE=Debug

MichRX7

@jsulm Thanks for the quick reply.

In the interim I did get a .mov file straight from a new iPhone and moved that over onto my Rpi4, and guess what. It plays, so it must be a codec issue on the mp4 (though it didn't have sound, but maybe the Rpi4 doesn't output sound through hdmi).

Is there a page that tells newbies like me how to install the right codec for my mp4 videos?

MichRX7

Hahaha, of course though I take a .mp4 into my video editing software and export it is a .mov and it won't play either. So is there a way to tell what I need to do to a video to get it to play or how I install the codec's I need in QT? I don't want to have to use only non-edited iPhone vids, lol...

(Seriously, so glad to just see a video play... thank you all for the help so far.)

jsulm

@MichRX7 Most safe method is to install all GStreamer plug-ins your distribution is providing.

MichRX7

@jsulm And I'm stuck again (of course), so I did the following on my Rpi4:
sudo apt-get install gstreamer1.0-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
gstreamer1.0-tools is already the newest version (1.14.4-1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

So, I already had the newest version of gstreamer installed. Is there something else I need to do to download specific codec's or all codec's? I tried going to the gstreamer website, but not seeing anything on codecs.

SGaist

The codec are provided in the gstreamer plugins packages. See the gstreamer1.0-plugins-XXX packages.

MichRX7

@SGaist said in Showing a mp4 in my app:

The codec are provided in the gstreamer plugins packages. See the gstreamer1.0-plugins-XXX packages.

Thanks, will look into that on my lunch break.

Or, if even easier, figure out why a .mov would play when it comes direct from an iPhone, but not if I take a mp4 and convert it into a mov in my video editing software. I mean, if I can convert to .mov and get it to work I'll just do that for now. :)

MichRX7

@SGaist said in Showing a mp4 in my app:

gstreamer1.0-plugins

Ok, well tried to install codecs, not sure if I'm doing it right. Did the following three entries, and now going to reboot because my videos didn't play:
apt-get install gstreamer1.0-plugins-*
apt-get install gstreamer1.0-plugins-*
apt-get install libavcodec-extra

If this is not correct, I can't figure out how to get them properly.

SGaist

Can you play your video directly with GStreamer from the command line ?

MichRX7

@SGaist said in Showing a mp4 in my app:

Can you play your video directly with GStreamer from the command line ?

Yes, using:
gst-launch-1.0 playbin uri=file:///home/pi/Videos/tomtiph.mp4

or

gst-play-1.0 /home/pi/Videos/tomtiph.mp4

both those commands play the video

SGaist

Good.

Then as next step, I would build and run the Media Player Example.

MichRX7

@SGaist said in Showing a mp4 in my app:

Good.

Then as next step, I would build and run the Media Player Example.

I have, it won't play the mp4 videos, but it will play the mov video saved direct from an iPhone just like my other videowidget.

SGaist

What are the specifications of that video ?

MichRX7

@MichRX7 said in Showing a mp4 in my app:

@SGaist said in Showing a mp4 in my app:

Good.

Then as next step, I would build and run the Media Player Example.

I have, it won't play the mp4 videos, but it will play the mov video saved direct from an iPhone just like my other videowidget.

File Type MPEG-4 Video
Total Size 5.8 MiB

JKSH

@SGaist recommended this earlier; it's still worth doing: Check the error signal. It could provide some clues as to why your video isn't playing.

Also, try connecting the status/state change signals and see what you get:

connect(player, QOverload<QMediaPlayer::Error>::of(&QMediaPlayer::error), [=](QMediaPlayer::Error error)
{
    qDebug() << "Error:" << error << player->errorString();
});

connect(player, &QMediaPlayer::mediaStatusChanged, [=](QMediaPlayer::MediaStatus status)
{
    qDebug() << "Media Status:" << status;
}

connect(player,, &QMediaPlayer::stateChanged, [=](QMediaPlayer::State state)
{
    qDebug() << "State:" << state;
}

MichRX7

@JKSH

Thank you for the reply. I placed these in the file. When I do the first connect throws this issue:
/tmp/VisualGDB/c/projects/LinuxProject1/MainWindow.cpp:35: error: reference to non-static member function must be called; did you mean to call it with no arguments?

The 2nd and 3rd connect's throw an error unless I put ); after the closing } for each connect.

I can't build the file until I figure out the issue with the first connect is. If I comment it out and place the ); after the 2nd and 3rd connects I can build the file, but I don't see any errors in the debug window in QT Creator if that is where I should be seeing issues.

MichRX7

When I run the build after commenting out the first connect that is giving me an issue I do see this in the debugger:
GStreamer; Unable to pause - "file:///home/pi/Videos/tomtiff.mp4"
Media Status: QMediaPlayer::LoadingMedia
GStreamer; Unable to pause - "file:///home/pi/Videos/tomtiff.mp4"
mediaStatus: QMediaPlayer::LoadingMedia error: QMediaPlayer::NoError

Media Status: QMediaPlayer::InvalidMedia
Error: "Resource not found."

If I switch the file name to the known working MOV file and run the build I do not see this information or anything like it in the debugger.

JKSH

@MichRX7 said in Showing a mp4 in my app:

error: reference to non-static member function must be called; did you mean to call it with no arguments?

Remember to include the & inside of()

The 2nd and 3rd connect's throw an error unless I put ); after the closing } for each connect.

Oops! I've edited the post to fix the syntax

MichRX7

@JKSH said in Showing a mp4 in my app:

@MichRX7 said in Showing a mp4 in my app:

error: reference to non-static member function must be called; did you mean to call it with no arguments?

Remember to include the & inside of()

I copied it right from the page, this is what I have in my code that is throwing that error:
connect(player, QOverloadQMediaPlayer::Error::of(&QMediaPlayer::error), [=](QMediaPlayer::Error error)
{
qDebug() << "Error:" << error << player->errorString;
});