How to display the result of an operation in incremental fashion strating from 0?
-
@LeLev please find the below code:
void MainWindow::on_controlButton_clicked()
{
double num1 = ui->num1->value();
double num2 = ui->num2->value();
double product = num1 * num2;
double currentDisplay=0;
QTimer *timer = new QTimer();
QObject::connect(timer, &QTimer::timeout,&{
if(currentDisplay>=product){
timer->stop();
}
ui->product->display(currentDisplay);
QApplication::processEvents();
if(currentDisplay<meetingCost)currentDisplay++;
});
timer->start(500);
}
}@Santhoshpl
It helps others if you put literal code in this forum's code markers.Meanwhile, I don't know, @Lelev writes
QObject::connect(timer, &QTimer::timeout,[&](){while you write
QObject::connect(timer, &QTimer::timeout,&{so do you know what you're doing there with your lambda? Is there any reason you change his code for this?
Otherwise run under debugger and look at the context/stack trace when the crash occurs.
-
@JonB said in How to display the result of an operation in incremental fashion strating from 0?:
[&]
Please take a c++ book about lambdas - you're passing by reference and it will therefore go out of scope...
-
@Gerd said in How to display the result of an operation in incremental fashion strating from 0?:
QApplication::processEvents();
This is an ugly work-around and should be avoided. It is better to program in asynchronous way instead of calling processEvents().
-
lol
then you should tell the qt people to remove such examples from the examples in qt sources...@Gerd said in How to display the result of an operation in incremental fashion strating from 0?:
then you should tell the qt people to remove such examples from the examples in qt sources...
you're right, it shouldn't be there, can you name/link such an example?
-
Qt\5.12.6.src\qtbase\examples\widgets\dialogs\findfiles
Qt\5.12.6.src\qtbase\examples\widgets\itemviews\pixelator
Qt\5.12.6.src\qtbase\examples\widgets\painting\fontsampler -
for these it isnt in the doc pages but in the sourcecode..
pixelator
fontsampler@Gerd
Well these examples haven't been touched in years, are very basic but never the less badly designed.One can redesign those examples, without the need for a processEvent calls, which will make them bigger (source code size).
But IMHO that's something that should be done. -
hi
@Santhoshpl said in How to display the result of an operation in incremental fashion strating from 0?:double num1 = ui->num1->value();
double num2 = ui->num2->value();
double product= num1*num2;
int temp=0;
for(int i = 0; i<product; i++){
temp++;
ui->product->display(temp);you can use QTimer for that
double num1 = 10; double num2 = 2; double product = num1*num2; int currentDisplay=0; //< QTimer *timer = new QTimer(); QObject::connect(timer, &QTimer::timeout,[&](){ if(currentDisplay>=product){ timer->stop(); } qDebug()<<currentDisplay; // ui->product->display(temp); if(currentDisplay<product)currentDisplay++; }); timer->start(50);@LeLev
I just read your response and it seemed what I need as well.
However, I just get a crash with this code:I have been having the same problems as the OP (and everyone else, I guess)
This code snippet is just for testing messages written to a QPlainTextEdit widget, nothing else.void MainWindow::writeLeft() { int32_t cnt = 100; QString msg, cno; QTimer *ltimer = new QTimer(); do{ QTextStream(&cno) << cnt; msg = ("Hello left no : "+ cno); //message has been constructed, stop the process and display it QObject::connect(ltimer, &QTimer::timeout,[&](){ if(cnt > 0){ ltimer->stop(); } ui->memo1->appendPlainText(msg); }); cno.clear(); QThread::sleep(1); ltimer->start(10); cnt--; }while(cnt > 0); }If I remove the QTimer statements then I just get the whole lot dumped to the QPlainTextEdit in one go.
-
@LeLev
I just read your response and it seemed what I need as well.
However, I just get a crash with this code:I have been having the same problems as the OP (and everyone else, I guess)
This code snippet is just for testing messages written to a QPlainTextEdit widget, nothing else.void MainWindow::writeLeft() { int32_t cnt = 100; QString msg, cno; QTimer *ltimer = new QTimer(); do{ QTextStream(&cno) << cnt; msg = ("Hello left no : "+ cno); //message has been constructed, stop the process and display it QObject::connect(ltimer, &QTimer::timeout,[&](){ if(cnt > 0){ ltimer->stop(); } ui->memo1->appendPlainText(msg); }); cno.clear(); QThread::sleep(1); ltimer->start(10); cnt--; }while(cnt > 0); }If I remove the QTimer statements then I just get the whole lot dumped to the QPlainTextEdit in one go.
-
@LeLev
I just read your response and it seemed what I need as well.
However, I just get a crash with this code:I have been having the same problems as the OP (and everyone else, I guess)
This code snippet is just for testing messages written to a QPlainTextEdit widget, nothing else.void MainWindow::writeLeft() { int32_t cnt = 100; QString msg, cno; QTimer *ltimer = new QTimer(); do{ QTextStream(&cno) << cnt; msg = ("Hello left no : "+ cno); //message has been constructed, stop the process and display it QObject::connect(ltimer, &QTimer::timeout,[&](){ if(cnt > 0){ ltimer->stop(); } ui->memo1->appendPlainText(msg); }); cno.clear(); QThread::sleep(1); ltimer->start(10); cnt--; }while(cnt > 0); }If I remove the QTimer statements then I just get the whole lot dumped to the QPlainTextEdit in one go.
@Colins2 im not 100% sure what you need to do but see
int32_t cnt = 100; QString msg, cno; QTimer *ltimer = new QTimer(); //do{ // QTextStream(&cno) << cnt; //msg = ("Hello left no : "+ cno); QObject::connect(ltimer, &QTimer::timeout,[&](){ cnt--; if(cnt == 0){ // < ltimer->stop(); } qDebug()<< ("Hello left no : " + QString::number(cnt)); }); cno.clear(); // QThread::sleep(1); ltimer->start(10); // }while(cnt > 0); -
@Colins2 im not 100% sure what you need to do but see
int32_t cnt = 100; QString msg, cno; QTimer *ltimer = new QTimer(); //do{ // QTextStream(&cno) << cnt; //msg = ("Hello left no : "+ cno); QObject::connect(ltimer, &QTimer::timeout,[&](){ cnt--; if(cnt == 0){ // < ltimer->stop(); } qDebug()<< ("Hello left no : " + QString::number(cnt)); }); cno.clear(); // QThread::sleep(1); ltimer->start(10); // }while(cnt > 0); -
-
@Colins2 im not 100% sure what you need to do but see
int32_t cnt = 100; QString msg, cno; QTimer *ltimer = new QTimer(); //do{ // QTextStream(&cno) << cnt; //msg = ("Hello left no : "+ cno); QObject::connect(ltimer, &QTimer::timeout,[&](){ cnt--; if(cnt == 0){ // < ltimer->stop(); } qDebug()<< ("Hello left no : " + QString::number(cnt)); }); cno.clear(); // QThread::sleep(1); ltimer->start(10); // }while(cnt > 0);@LeLev
I don't think your solution is what I want.What I am trying to achieve is quite simple - or should be.
I have a PlainTextEdit widget that I am using as a log output.
At various times through different routines, I want to output a message.
What happens is that I get no output until the end of the routine, which isn't much use.I just cobbled the above routine to try to get just the message output working. It has no real relevance to my project other than the method.
My loop just created a message with the counter attached and I would expect it to print to the PlainTextEdit widget when called.
It doesn't do that. Stepping through the code, the statement executes and then the loop continues but nothing appears in the edit field. At the end of the loop it all gets dumped in one go.Re. the QTimer, It's new to me. I've never had to use these types of function to get output on the screen.
As Gerd says in his post, it should be such a simple thing to do but it appears not to be. -
@LeLev
I don't think your solution is what I want.What I am trying to achieve is quite simple - or should be.
I have a PlainTextEdit widget that I am using as a log output.
At various times through different routines, I want to output a message.
What happens is that I get no output until the end of the routine, which isn't much use.I just cobbled the above routine to try to get just the message output working. It has no real relevance to my project other than the method.
My loop just created a message with the counter attached and I would expect it to print to the PlainTextEdit widget when called.
It doesn't do that. Stepping through the code, the statement executes and then the loop continues but nothing appears in the edit field. At the end of the loop it all gets dumped in one go.Re. the QTimer, It's new to me. I've never had to use these types of function to get output on the screen.
As Gerd says in his post, it should be such a simple thing to do but it appears not to be.@Colins2 said in How to display the result of an operation in incremental fashion strating from 0?:
At various times through different routines, I want to output a message.
If I understand you correctly this will not happen in a loop in your main thread - is that correct?
Is your current implementation with the loop just proof of concept (or an example)?
As I explained already your loop is blocking the event loop that's why it behaves like it does.
So, the question is: how are these messages generated and exposed? -
@JonB
The idea was to trigger the timer stop so that I could print the current message and then resume.
I see what you mean though, it shouldn't be necessary to re-connect every time, just start and stop.@Colins2
It's not just that it shouldn't be necessary, your loop will create a brand new, duplicate connection each time round the loop. You will end up with hundreds of slots on the timer's signal.This code really shouldn't be difficult! Though I'm not offering to write, and I'm Python/PyQt anyway. You have to have something which allows the Qt event loop to run if you want to see the output come up as you go along. If your new data arrives from somewhere externally, you might raise a signal and have a slot to update your display. That will be happening within the Qt main event loop, so all will get updated as you go along.
I see @jsulm is responding more to what you want, I'll leave it to him :)
-
@Colins2 said in How to display the result of an operation in incremental fashion strating from 0?:
At various times through different routines, I want to output a message.
If I understand you correctly this will not happen in a loop in your main thread - is that correct?
Is your current implementation with the loop just proof of concept (or an example)?
As I explained already your loop is blocking the event loop that's why it behaves like it does.
So, the question is: how are these messages generated and exposed?@jsulm
Yes, it will happen during the loop execution, that is the whole point of my problem.Rather than talking abstract things, this is what I want to do:
I have a large plain text file (300k+) which is an airport database in a flight sim.
The entries are formatted according to their specs with all entries in plain text to make it easy to read in a text editor if desired.
There are over 28000 entries in there.
There are some formatting errors also that stop me from processing the data as I wish.
I have a program that I wrote in Rad Studio that does exactly what I want.
It reads every entry, skips the fields I don't want, collects various statistics and file locations that I do want and gives me the output that I am looking for. While processing, it will print whatever I tell it on the screen in a memo field.
I used this to good effect when trying to get around some of the wrongly formatted data that was crashing my program, i.e. finding out where it was crashing, and on which entry.
I have got a program that runs error free now and will print out the erroneous entries as they occur so that I can manually edit the file and correct them.I have no problem with Rad Studio, I have been a C++ Builder user for years but it only works on Windows. As the sim runs on MacOS and Linux as well, I wanted to try to write the same program that I could compile on all 3 platforms, hence the use of Qt.
