cross compiled qt for BBB

jsulm

@Asha said in cross compiled qt for BBB:

while running that command in beagleboneboard(via ssh) not getting anything..

when there is no XServer running. Just to be sure: you're running this command when the graphical desktop is shown?
You need to find out what is used on your device. Could be directfb for example.

Asha

@jsulm said in cross compiled qt for BBB:

you're running this command when the graphical desktop is shown?

no,
I run that command without the connecting display..
ps -e | grep X

this command displays all process status which are running right..

one more thing I want to clear,

"I put sdcard in my board,and executing the qt application without connecting the display, then getting the same error Qxcb"

but

"without sdcard, I am executing the qt application ,then its asking

Qvnc server created on port 5900"

when I execute the VNC software in my host machine, I am able to see the output..

jsulm

@Asha said in cross compiled qt for BBB:

no,

Then make sure your display is connected and you can see graphical desktop and then run the command...

Asha

@jsulm

I connected my board with display,

And,I am able to see the graphical desktop on my display,

while giving this command

ps -e | grep X

I got the result:

1199 tty7 00:00:02 Xorg

so what it means?

jsulm

@Asha said in cross compiled qt for BBB:

so what it means?

So, now X server is running. But your app doesn't start, right?
You get "Qxcb connection:could not connect to the display"?
Do you start your app as root or normal user?

Pablo J. Rogina

@Asha in addition to @jsulm question,

Do you start your app as root or normal user?

How are you starting your application:
Do you have a physical keyboard attached to the board?
Or do you connect to the board from PC with a SSH session?

Asha

@jsulm said in cross compiled qt for BBB:

You get "Qxcb connection:could not connect to the display"?

yes

Do you start your app as a root

this means ,first i need to do

ssh debian@192.168.7.2
after this sudo su

root@beaglebone:

now I need to run the application right?

but what about that normal user?
I need to run it on my Desktop machine?
without ssh?

jsulm

@Asha said in cross compiled qt for BBB:

after this sudo su

NO! You should not start it as root.

Can you connect a keyboard to your device and start directly there without SSH.

Pablo J. Rogina

@Asha said in cross compiled qt for BBB:

ssh debian@192.168.7.2

Ok, after millions of posts we finally reach the point where you stated how you're starting the application in the board...

It looks like you're NOT forwarding the X display. Please try connecting to the board this way:

ssh -X debian@192.168.7.2

and then proceed as you've been doing to start the Qt app

Asha

@Pablo-J-Rogina

while connecting as you said above ,

getting the result

s
libEGL warning: DRI3: failed to query the version
libEGL warning: DRI2: failed to authenticate
./animatedtiles: relocation error: ./animatedtiles: symbol _ZN18QRandomGenerator646globalEv, version Qt_5 not defined in file libQt5Core.so.5 with link time reference

jsulm

@Asha Deploy your app correctly (include your cross compiled Qt libraries). Looks like you have different Qt version on your device than the one you cross compiled.

Asha

@jsulm

I have those libraries in usr lib directory

root@beaglebone:find / -name libGLESv2* -type f
/usr/lib/arm-linux-gnueabihf/libGLESv2.so.2.0.0
root@beaglebone: find / -name libEGL* -type f
/usr/lib/arm-linux-gnueabihf/libEGL_mesa.so.0.0.0
/usr/lib/arm-linux-gnueabihf/libEGL.so.1.0.0

@jsulm said in cross compiled qt for BBB:

Looks like you have different Qt version on your device than the one you cross compiled.

how do I found,which version qt is running on my device?

jsulm

@Asha Do

ldd YOUR_EXECUTABLE

on your device and see which Qt libs linker finds.

Asha

@jsulm

this is the result:

debian@beaglebone:~/Qt5/examples/widgets/animation/animatedtiles$ ldd ./animatedtiles
linux-vdso.so.1 (0xbeffe000)
libQt5Widgets.so.5 => /usr/lib/arm-linux-gnueabihf/libQt5Widgets.so.5 (0xb6b07000)
libQt5Gui.so.5 => /usr/lib/arm-linux-gnueabihf/libQt5Gui.so.5 (0xb67dd000)
libQt5Core.so.5 => /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5 (0xb6469000)
libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0xb6445000)
librt.so.1 => /lib/arm-linux-gnueabihf/librt.so.1 (0xb642f000)
libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb641c000)
libstdc++.so.6 => /usr/lib/arm-linux-gnueabihf/libstdc++.so.6 (0xb6310000)
libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6298000)
libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0xb626f000)
libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb6181000)
libGLESv2.so.2 => /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2 (0xb6163000)
/lib/ld-linux-armhf.so.3 (0xb6f44000)
libharfbuzz.so.0 => /usr/lib/arm-linux-gnueabihf/libharfbuzz.so.0 (0xb60e7000)
libz.so.1 => /lib/arm-linux-gnueabihf/libz.so.1 (0xb60c5000)
libpng16.so.16 => /usr/lib/arm-linux-gnueabihf/libpng16.so.16 (0xb6095000)
libicui18n.so.57 => /usr/lib/arm-linux-gnueabihf/libicui18n.so.57 (0xb5ee8000)
libicuuc.so.57 => /usr/lib/arm-linux-gnueabihf/libicuuc.so.57 (0xb5dbf000)
libpcre16.so.3 => /usr/lib/arm-linux-gnueabihf/libpcre16.so.3 (0xb5d67000)
libdouble-conversion.so.1 => /usr/lib/arm-linux-gnueabihf/libdouble-conversion.so.1 (0xb5d49000)
libglib-2.0.so.0 => /lib/arm-linux-gnueabihf/libglib-2.0.so.0 (0xb5c6e000)
libGLdispatch.so.0 => /usr/lib/arm-linux-gnueabihf/libGLdispatch.so.0 (0xb5bf0000)
libfreetype.so.6 => /usr/lib/arm-linux-gnueabihf/libfreetype.so.6 (0xb5b77000)
libgraphite2.so.3 => /usr/lib/arm-linux-gnueabihf/libgraphite2.so.3 (0xb5b4c000)
libicudata.so.57 => /usr/lib/arm-linux-gnueabihf/libicudata.so.57 (0xb42bf000)
libpcre.so.3 => /lib/arm-linux-gnueabihf/libpcre.so.3 (0xb4260000)

In this libEGL library missing ,how do I solve this ?

jsulm

@Asha Your current problem is not libEGL.
The problem is here: ./animatedtiles: relocation error: ./animatedtiles: symbol _ZN18QRandomGenerator646globalEv, version Qt_5 not defined in file libQt5Core.so.5 with link time reference

Are these Qt libs the libs you cross compiled and exact same version you're using on your host to cross compile your app?

libQt5Widgets.so.5 => /usr/lib/arm-linux-gnueabihf/libQt5Widgets.so.5 (0xb6b07000)
libQt5Gui.so.5 => /usr/lib/arm-linux-gnueabihf/libQt5Gui.so.5 (0xb67dd000)
libQt5Core.so.5 => /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5 (0xb6469000)

Asha

@jsulm

my configure command is exactly as shown in below ,please go through this

./configure -platform linux-g++ release -device linux-beagleboard-g++ -sysroot /home/beagle/BBB/sysroot -prefix /home/debian/Qt5 -hostprefix ~/Qt5 -device option
CROSS_COMPILE = /home/beagle/BBB/gcc-linaro......gnuabihf- -nomake tests -nomake examples -no-opengl -opensource -confirm-license -reduce-exports -make libs -no-egl -no-eglfs -qt-zlib -qt-libpng -no-use-gold-linker-linuxfb -qt-libjpeg -no-opengl -no-cups -no-glib -no-iconv -nomake examples -nomake tools -nomake tests -no-pkg-config -skip qtdeclarative -skip qtlocation -skip qtpurchasing -skip qtwayland -skip qtwebchannel -skip qtwebengine -skip qtwebsockets -skip qtwebview -skip qtwebglplugin -skip qtandroisextras -skip qtgamepad -skip qtmacextras -skip qtwinextras -skip qtsensors -skip qtconnectivity -recheck-all -v

any mistakes in this configuration then please let me know..(if any mistakes then what configuration I need to give ,for my X server, beagleboneboard,just i want to run a simple qt application in my board and display the output in my display screen)...

jsulm

@Asha You did not answer my question.
Where did you put your cross compiled Qt on the device?

Asha

@jsulm

I copied my cross compiled qt in my board via

scp Qt5 debian@192.168.7.2:Qt5

means directly in my device only,not in any directory(where i need to copy that one)..

SGaist

So you did not copy the libraries at the exact same place on your device ?

Your system installed Qt is picked before the one you copied.

So one solution is to call: LD_LIBRARY_PATH=/path/to/your/cross-compiled_qt/lib ./YOUR_EXECUTABLE_NAME.

jsulm

@Asha said in cross compiled qt for BBB:

means directly in my device only

Your app definitely uses wrong Qt libs.
You have to copy the Qt libs into same directory you specified in -prefix. In your case /home/debian/Qt5.
If this is the case then try following to start your app on device:

cd DIR_WHERE_YOUR_APP_IS
export LD_LIBRARY_PATH=/home/debian/Qt5
./YOUR_APP