compile qt project error

jsulm

@chris_rookie How was this Qt installed?

chris_rookie

@jsulm
I executed

./configure -static -prefix /usr/local/Qt5.9.2/ -nomake tests -skip qt3d -skip qtcanvas3d -skip qtspeech -nomake examples
make -j4
sudo make install

jsulm

@chris_rookie You should check the configure log to see whether network modules and SSL were activated.

chris_rookie

@jsulm

Trying source 0 (type makeSpec) of library network ...
=> source accepted.
executing config test getaddrinfo

cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/getaddrinfo && /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += static use_gold_linker warn_off console single_arch" /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/getaddrinfo
cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/getaddrinfo && MAKEFLAGS= /usr/bin/make

g++ -c -pipe -O2 -std=gnu++11 -w -fPIC -I. -I/home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/mkspecs/linux-g++ -o main.o main.cpp
g++ -Wl,-O1 -fuse-ld=gold -o getaddrinfo main.o
test config.network.tests.getaddrinfo succeeded
executing config test getifaddrs

cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/getifaddrs && /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += static use_gold_linker warn_off console single_arch" /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/getifaddrs
cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/getifaddrs && MAKEFLAGS= /usr/bin/make

g++ -c -pipe -O2 -std=gnu++11 -w -fPIC -I. -I/home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/mkspecs/linux-g++ -o main.o main.cpp
g++ -Wl,-O1 -fuse-ld=gold -o getifaddrs main.o
test config.network.tests.getifaddrs succeeded
executing config test ipv6ifname

cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/ipv6ifname && /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += static use_gold_linker warn_off console single_arch" /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/ipv6ifname
cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/ipv6ifname && MAKEFLAGS= /usr/bin/make

g++ -c -pipe -O2 -std=gnu++11 -w -fPIC -I. -I/home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/mkspecs/linux-g++ -o main.o main.cpp
g++ -Wl,-O1 -fuse-ld=gold -o ipv6ifname main.o
test config.network.tests.ipv6ifname succeeded
looking for library openssl_headers
Trying source 0 (type inline) of library openssl_headers ...

cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/openssl && /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += static use_gold_linker warn_off console single_arch" /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/config.tests/openssl
cd /home/huayu/qt-everywhere-opensource-src-5.9.2/config.tests/openssl && MAKEFLAGS= /usr/bin/make

g++ -c -pipe -O2 -std=gnu++11 -w -fPIC -I/home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/config.tests/openssl -I. -I/home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/mkspecs/linux-g++ -o openssl.o /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/config.tests/openssl/openssl.cpp
> /home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/config.tests/openssl/openssl.cpp:40:30: fatal error: openssl/opensslv.h: No such file or directory
compilation terminated.

I don't know what caused this faild. And, What should I do?

SGaist

Hi,

Looks like you didn't install the OpenSSL development package.

jsulm

@chris_rookie said in compile qt project error:

atal error: openssl/opensslv.h: No such file or directory
compilation terminated.

This is the answer. Looks like OpenSSL dev package is not installed (it contains that header file).

chris_rookie

@SGaist

Thanks for your answer.

chris_rookie

@jsulm
Thank you so much.
After Installing OpenSSL development package, should I install Qt again?

.....

make[6]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer/src/components/lib'
make[5]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer/src/components'
cd designer/ && ( test -e Makefile || /home/wuyin/qt-everywhere-opensource-src-5.9.2/qtbase/bin/qmake -o Makefile /home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer/src/designer/designer.pro ) && make -f Makefile install
make[5]: Entering directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer/src/designer'
make[5]: *** No rule to make target 'install'。停止。
make[5]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer/src/designer'
Makefile:160: recipe for target 'sub-designer-install_subtargets' failed
make[4]: *** [sub-designer-install_subtargets] Error 2
make[4]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer/src'
Makefile:56: recipe for target 'sub-src-install_subtargets' failed
make[3]: *** [sub-src-install_subtargets] Error 2
make[3]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src/designer'
Makefile:115: recipe for target 'sub-designer-install_subtargets' failed
make[2]: *** [sub-designer-install_subtargets] Error 2
make[2]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools/src'
Makefile:58: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/wuyin/qt-everywhere-opensource-src-5.9.2/qttools'
Makefile:665: recipe for target 'module-qttools-install_subtargets' failed
make: *** [module-qttools-install_subtargets] Error 2

This error occurred during my installation.
What make this faild?

jsulm

@chris_rookie said in compile qt project error:

What make this faild?

You should do a clean Qt rebuild without old build artefacts.

chris_rookie

@jsulm
Thank you. It works.

Jignesh Patel

@chris_rookie

Can you help me on how you have installed the OpenSSL development package?

I already have installed in my desktop still i am getting error :

/home/huayu/qt-everywhere-opensource-src-5.9.2/qtbase/config.tests/openssl/openssl.cpp:40:30: fatal error: openssl/opensslv.h: No such file or directory
compilation terminated.

Thank you,
Jignesh Patel

SGaist

@Jignesh-Patel hi,

Which version of OpenSSL did you install ?
Did you install the development package ?

Jignesh Patel

@SGaist ,

Thank you for reply,

I have installed openssl "OpenSSL 1.1.0f 25 May 2017" on ubuntu 16.04 LTS and also libssl-dev revision is 1.0.2g-1ubuntu4.20.
I am trying to cross compile qt 5.7.1 using following configuration:
"./configure -v -opensource -confirm-license -no-pch -no-xcb -no-opengl -openssl -make libs -device imx6 -compile-examples -device-option CROSS_COMPILE=/home/jignesh/var_mx6ul_dart_debian_stretch93/toolchain/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot <rootfs> -no-gcc-sysroot -prefix <installdir>"

Best Regards,
Jignesh Patel

SGaist

Then that's the issue, the Qt version you want to use is too old to support OpenSSL 1.1. Either update it or install OpenSSL 1.0. There was a huge incompatible jump between the 1.0 and 1.1 versions.

Jignesh Patel

@SGaist said in compile qt project error:

OpenSSL 1.0
Thank you for your support.

I have installed OpenSSL version "OpenSSL 1.0.2g 1 Mar 2016" but getting same error.
I have some questions about this:

As I am cross-compiling qt in my ubuntu-desktop, does it need to cross-compile openssl before cross compiling qt.
Does it required to add the path of OpenSSL in the ./config command line argument?

Best Regards,
Jignesh Patel

SGaist

You need all dependencies of the right architecture when cross-compiling.

Depending on the distribution you use on your target, you can install the required development packages and sync them back to your main machine as sysroot to use when cross-compiling.

Jignesh Patel

@SGaist
Thank you for your reply.

Successfully cross-compiled source of 5.7.1:
the issue has been resolved by adding the following:
After downloading the source and compiling OpenSSL 1.0.2 stable.

./config --prefix=/opt/openssl_build_stable -shared
make
make test
sudo make install

Link open ssl in qt config:

-openssl -I /opt/openssl_build_stable/include -L /opt/openssl_build_stable/lib

Best Regards,
Jignesh Patel