How to cross-compile qt5.9.5 to SDR board ?

Mijaz

root@ijaz-HP-ProDesk-400-G4-MT:~# /home/ijaz/myQT5Root/qt-everywhere-opensource-src-5.9.5/qtbase/configure -top-level -opensource -confirm-license -prefix /usr/local/Qt-5.9.5-arm -embedded arm -little-endian -no-pch -xplatform linux-arm-gnueabihf-g++
You cannot make a shadow build from a source tree containing a previous build.
Cannot proceed.

I think for the latest version I need the latest toolchain which will not support my board OS.

jsulm

@Mijaz said in How to cross-compile qt5.9.5 to SDR board ?:

You cannot make a shadow build from a source tree containing a previous build

That's why I suggested to build OUTSIDE of the Qt source tree: to keep it clean.
Now, checkout Qt source code again, create a build directory, go that directory and call configure from there.

mkdir qt_build
cd qt_build
PATH_TO_YOUR_QT/qtbase/configure ...

Mijaz

@jsulm
Now I have installed the latest version qt-5.12.5. But ./Configuration error still not resolved.

 ./configure -debug-and-release -device linux-arm-generic- -device-option CROSS_COMPILE=~/home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -sysroot ~/home/ijaz/myQT5Root/sysroot -opensource -confirm-license -make libs -prefix /usr/local/qt512 -no-use-gold-linker -v -no-gbm
Creating qmake...
make: Nothing to be done for 'first'.
Command line: -debug-and-release -device linux-arm-generic- -device-option CROSS_COMPILE=/home/ijaz/home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -sysroot /home/ijaz/home/ijaz/myQT5Root/sysroot -opensource -confirm-license -make libs -prefix /usr/local/qt512 -no-use-gold-linker -v -no-gbm
Project ERROR: Cannot run target compiler '/home/ijaz/home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++g++'. Output:
===================
===================
Maybe you forgot to setup the environment?

jsulm

@Mijaz said in How to cross-compile qt5.9.5 to SDR board ?:

./configure

You're again calling configure from the Qt source directory. Why?

"installed the latest version qt-5.12.5" - do you mean you checked out Qt 5.12.5 from Git or downloaded its source code as tar.gz archive? So, what exactly did you download?

Mijaz

@jsulm
I have maked directory by:
cd mkdir qt_build
cd qt_build

ijaz@ijaz-HP-ProDesk-400-G4-MT:~/qt_build$  ./configure -debug-and-release -device linux-arm-generic- -device-option CROSS_COMPILE=~/home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf- -sysroot ~/home/ijaz/myQT5Root/sysroot -opensource -confirm-license -make libs -prefix /media/ijaz/EA82822F8281FFF5/qt5_12/5.12.5/gcc_64 -no-use-gold-linker -v -no-gbm
bash: ./configure: No such file or directory

I have downloaded the "qt-opensource-linux-x64-5.12.5.run" and installed
Now I have the Qt 5.12.5 version

jsulm

@Mijaz You should learn the basics: how to execute a command in terminal using an absolute ot relative path.
And you should read what others write more carefully - I already provided an example how to do this. Here once more:

mkdir qt_build
cd qt_build
PATH_TO_YOUR_QT/qtbase/configure ...

"I have downloaded the "qt-opensource-linux-x64-5.12.5.run" and installed" - you installed Qt binaries I guess, if you want to compile Qt you need to install Qt source code of course.

Mijaz

@jsulm

ijaz@ijaz-HP-ProDesk-400-G4-MT:~/myQT5Root/qt-everywhere-src-5.12.5$ ./configure+ cd qtbase
+ /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/configure -top-level 
Creating qmake...
...........................................................................................Done.
Info: creating super cache file /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/.qmake.super
Info: creating cache file /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/.qmake.cache
/home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/mkspecs/features/qt_configure.prf:2300: Error parsing JSON at 1:1: illegal value
Project ERROR: Invalid or non-existent file /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtdeclarative/configure.json.

jsulm

@Mijaz Now you're again compiling inside Qt source code directory! WHY?!
AGAIN:

mkdir qt_build
cd qt_build
~/myQT5Root/qt-everywhere-src-5.12.5/configure ...

So, you go to your build directory and call configure from Qt source code directory using a whole path to it...

Mijaz

@jsulm

ijaz@ijaz-HP-ProDesk-400-G4-MT:~/qt_build$ ~/myQT5Root/qt-everywhere-src-5.12.5/configure -release -device linux-arm-generic-g++ -device-option CROSS_COMPILE=~/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf- -sysroot ~/myQT5Root/sysroot -opensource -confirm-license -skip qtwayland -skip qtlocation -skip qtscript -make libs -prefix /usr/local/qt5_12 -no-use-gold-linker -v -no-gbm
+ cd qtbase
+ /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/configure -top-level -release -device linux-arm-generic-g++ -device-option CROSS_COMPILE=/home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf- -sysroot /home/ijaz/myQT5Root/sysroot -opensource -confirm-license -skip qtwayland -skip qtlocation -skip qtscript -make libs -prefix /usr/local/qt5_12 -no-use-gold-linker -v -no-gbm
Performing shadow build...
Preparing build tree...
Creating qmake...
make: Nothing to be done for 'first'.
Command line: -release -device linux-arm-generic-g++ -device-option CROSS_COMPILE=/home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf- -sysroot /home/ijaz/myQT5Root/sysroot -opensource -confirm-license -skip qtwayland -skip qtlocation -skip qtscript -make libs -prefix /usr/local/qt5_12 -no-use-gold-linker -v -no-gbm

This is the Qt Open Source Edition.

You have already accepted the terms of the Open Source license.

Running configuration tests...

+ /home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -dumpmachine
> arm-linux-gnueabihf
Checking for valid makespec... 
+ cd /home/ijaz/qt_build/config.tests/verifyspec && /home/ijaz/qt_build/qtbase/bin/qmake "CONFIG -= qt debug_and_release app_bundle lib_bundle" "CONFIG += shared warn_off console single_arch" "QMAKE_CFLAGS += --sysroot=/home/ijaz/myQT5Root/sysroot" "QMAKE_CXXFLAGS += --sysroot=/home/ijaz/myQT5Root/sysroot" "QMAKE_LFLAGS += --sysroot=/home/ijaz/myQT5Root/sysroot" -early "CONFIG += cross_compile" /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/config.tests/verifyspec
+ cd /home/ijaz/qt_build/config.tests/verifyspec && MAKEFLAGS= /usr/bin/make clean && MAKEFLAGS= /usr/bin/make
> rm -f verifyspec.o
> rm -f *~ core *.core
> /home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -c -pipe -mfloat-abi=softfp --sysroot=/home/ijaz/myQT5Root/sysroot -O2 -std=gnu++11 -w -fPIC  -I/home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/config.tests/verifyspec -I. -I/home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/mkspecs/devices/linux-arm-generic-g++ -o verifyspec.o /home/ijaz/myQT5Root/qt-everywhere-src-5.12.5/qtbase/config.tests/verifyspec/verifyspec.cpp
> /home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -mfloat-abi=softfp --sysroot=/home/ijaz/myQT5Root/sysroot -Wl,-O1 -o verifyspec verifyspec.o      
> /home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/../../../../arm-linux-gnueabihf/bin/ld: error: verifyspec uses VFP register arguments, verifyspec.o does not
> /home/ijaz/myQT5Root/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/../../../../arm-linux-gnueabihf/bin/ld: failed to merge target specific data of file verifyspec.o
> collect2: error: ld returned 1 exit status
> Makefile:68: recipe for target 'verifyspec' failed
> make: *** [verifyspec] Error 1
Note: Also available for Linux: linux-clang linux-icc

ERROR: Cannot compile a minimal program. The toolchain or QMakeSpec is broken.

Note: Because I am using the SDR board and that board is not included in the device list so I have used Linux-arm-generic-g++.

jsulm

@Mijaz said in How to cross-compile qt5.9.5 to SDR board ?:

Note: Because I am using the SDR board and that board is not included in the device list so I have used Linux-arm-generic-g++.

I'm not sure, but my guess is that you have to to adapt that mkspec for your device.
"error: verifyspec uses VFP register arguments, verifyspec.o does not" - it looks like different ABI is used.

SGaist

Hi,

Is there any mkspec that closely matches your board ?
If so copy it and customize it so it fits your device.