Unicode character to readable format

eswar

For your information, the application read the weighing scale data through serial port. if i ran the application same application in windows machine, i will get the correct data .
Refer the attached image ( image url)
if i ran the application in the linux machine, i will get the escape sequence data only.
Refer image ( link url) .
Both are same application screen shot with different machine. I dint know, Why it is behave in linux environment. If it is uni coded character in linux, i need to covert the character similar to the windows output.

aha_1980

@eswar The data you received is pure ASCII - it will work in Linux too if handled correctly.

Please show the code where you receive the data and how you store it in variables.

eswar

Hi

Check the sample code for receiving data in the serial port.

connect(port,&QSerialPort::readyRead,this,&WeighingMachine::readData);

buffer is QByteArray datatype.

void WeighingMachine::readData()
{
QString Time = QTime::currentTime().toString("hh:mm:ss.zzz");

while(!(port->atEnd()))
{
    buffer.append(port->readAll());

    int i =0;
    QByteArray temp;
    int len = buffer.length();

#ifdef QT_DEBUG
qDebug()<<"Buffer: "<< QString::fromUtf8(buffer);;
#endif

    while(i<len)
    {

        if ((buffer.at(i)== '\r') && (temp.length() > 0))
        {
            QString str(temp);
            QString Find = "\n";
            QString replace = "";
            str.replace(str.indexOf(Find),Find.size(),replace);
            weighingMachineData = Time +"," +str;

#ifdef QT_DEBUG
// qDebug()<<"Weighing Data: "<<weighingMachineData;
#endif

            temp.clear();
        }
        else
        {
            temp.append(buffer.at(i));
        }

        i++;
    }
    buffer.clear();
    buffer.append(temp);
    temp.clear();
}

}

For your information, I also receive the same data in cutecom terminal also.

aha_1980

@eswar said in Unicode character to readable format:

#ifdef QT_DEBUG
qDebug()<<"Buffer: "<< QString::fromUtf8(buffer);;
#endif

Please change that to: qDebug() << "Buffer:" << buffer << "hex:" << buffer.toHex(); and post the output here.

Thanks.

eswar

@aha_1980

Please refer the following image

aha_1980

@eswar That is really strange - all these characters are outside the visible ASCII range.

Do you have a documentation for the command set of the device you are talking with?
Can you repeat the last qDebug() tests in Windows?
Are you sure the serial parameters (baudrate, start, stop bits, parity) are correct in Linux?

eswar

Hi @aha_1980

Please refer below images for windows output

serial parameters are same for both linux and windows.
In device documentation, transmission data format is mentioned as 8 bit ASCII format.

aha_1980

@eswar Something is terribly wrong in Linux - I'd blame the serial parameters.

You need to find the culprit before you can continue.

Best start with a terminal program in Linux and see if you can receive the data correctly there.

eswar

@aha_1980

Thanks for the support.

Cutecom was also receive the same thing. So only i am not able to find the problem. Find below,

aha_1980

@eswar

Ok, so some more questions:

Is this Linux system a regular PC? Is it the same running Windows?
How do you connect the device to the PC? True RS-232, or USB (like FTDI?)
Is the external device properly powered?

SGaist

To add to @aha_1980, are you using the same device for development on both platforms ?

eswar

@aha_1980
The linux system is regular laptop and windows is another laptop.
The device is connected via USB( converter is used to covert the serial RS-232 to USB)
The external device is properly powered using separate power supply.

@aha_1980

Same device is used to development on both platforms. The previous attached screenshot are taken same value in device for both linux and windows platform.

SGaist

Might be a silly question but did you try to connect it to another Linux station to see if it gives you the same results ?

eswar

Hi @SGaist and @aha_1980

The issue was solved. Its related to linux OS problem. Its will work well with linux mint 19 OS. Before the earlier version of linux, the data received as encoded format only. In Linux mint 19, it will work fine in both cutecom as well as Qt application. Thanks for the support to solve the issue.