QTextEdit minimal height but expanding problem

[JonB]

@kenchan said in QTextEdit minimal height but expanding problem:

textEdit->setMinimumSize(QSize(0, 100));
textEdit->setMaximumSize(QSize(16777215, 100));

That looks like you minimum height is the same as your maximum height at value 100, no? Shall I just take that as a typo for 20 as minimum?

If I understand right, all you are changing from mine is:

• Get rid of my te.setSizePolicy(QtWidgets.QSizePolicy.Preferred, QtWidgets.QSizePolicy.MinimumExpanding) line completely, leave it at default.

• Replace my vLayout.addStretch() with your QSpacerItem(20, 40, QSizePolicy::Minimum, QSizePolicy::Expanding);

Is that it? (I tried that principle and it made no difference.) Or, do I see you're utilising two QVBoxLayouts to achieve something, and that's what the difference is?

[kenchan]

@JonB
You can use the sizes you need. You can probably get away with only the one vertical layout. Does it behave something like you want?

[JonB]

@kenchan
I appreciate your example. To test it I will have to translate all the code into Python. Of course I can do that, but not in one minute! I cannot see how it would address the problem I am facing (if all you are doing is replacing my QStretch with your QSpacer, which I have tested) , so I'm not keen to start out on the full translation yet, though I wouldn't want you to be insulted! If you looked at/pasted a screenshot with one the one hand one line of text in the text edit and on the other hand six lines of text in the text edit we would know immediately whether it looked right...!

[SGaist]

Hi,

IIRC, you should add vLayout.addStretch() before you add your combobox to the layout.

[JonB]

@SGaist
I want the bottom of the QTextEdit to be immediately followed by the QComboBox. (The vLayout.addStretch() I presently have is for the gap from the QComboBox down to the QPushButton.) You want me to put a vLayout.addStretch() between the QTextEditand the QComboBox, even though I want them touching? I will certainly try whatever you suggest tomorrow!

[SGaist]

Sorry, I misunderstood you. Therefor no, my answer was wrong.

In that case, why add a stretch add all ?

If you want your QTextEdit to take most of the space, then set the stretch parameter of the addWidget call to 1 and it should do what you want.

[JonB]

@SGaist
No, the whole point of this seems to boil down to: I want the QTextEdit to take the least vertical space to display its content. (E.g. in he second screenshot, I want the combobox up to just below where the text ends, not down near the button.) And that is not proving possible?

[mrjj]

Just to be sure.
The goal is like this

This is via code.
Setting Layout margins to zero and disable scrollbars.
Then controlling max height via code. Not super elegant.
Im very interested if this can be done with Policy alone.

void MainWindow::on_textEdit_textChanged() {
  QSize size = ui->textEdit->document()->size().toSize();
  ui->textEdit->setFixedHeight( size.height()  );
}

Using a spacer i force the button to stay below.

[JonB]

@mrjj
Exactly!!

In my case, I am only using the QTextEdit as a read-only for displaying a message of unknown length. Therefore personally I do not need it to resize as the user types, only when created or via setText(). I can apply your principle then.

I didn't expect to have to do this by setting fixed height in code. Like you, I think, I expected this to be doable purely by some size policy. All I seem to need is a QTextEdit which can grow or shrink as required for its content, but QSizePolicy is not allowing this? A QLabel with no size specified takes up as much room as its text, right? Can I get a (read-only will suffice) QTextEdit to do that?

[SGaist]

Try with that version:

dlg = QtWidgets.QDialog()
dlg.setWindowTitle("Dialog")
dlg.setGeometry(50, 50, 300, 300)

vLayout = QtWidgets.QVBoxLayout(dlg)
vLayout.setContentsMargins(0, 0, 0, 0)
vLayout.setSpacing(0)

te = QtWidgets.QTextEdit()
te.setText("This is some message text\nacross two lines.")
te.setReadOnly(True)
te.setStyleSheet("background-color: red;")
vLayout.addWidget(te)

cmb = QtWidgets.QComboBox()
cmb.addItem("ComboBox")
vLayout.addWidget(cmb)

vLayout.addStretch(1)

btn = QtWidgets.QPushButton("Button")
vLayout.addWidget(btn)

font = te.document().defaultFont() 
fontMetrics = QtGui.QFontMetrics(font) 
textSize = fontMetrics.size(0, te.toPlainText())
textHeight = textSize.height() + 30 # Need to tweak
te.setMaximumHeight(textHeight) 

You may have to tweak it a bit further. Likely redo the height calculation when you set a new text.

[J.Hilk]

@JonB said in QTextEdit minimal height but expanding problem:

In my case, I am only using the QTextEdit as a read-only for displaying a message of unknown length. Therefore personally I do not need it to resize as the user types, only when created or via setText(). I can apply your principle then.

If it's read only, why don't you use a QLabel than? fixes all your problems.

Otherwise, I would probably subclass QTextEdit and overwrite the sizeHint method.

[JonB]

@J.Hilk

If it's read only, why don't you use a QLabel than? fixes all your problems.

In my original question I wrote:

(Can't remember why, but I want a QTextEdit, not a QLabel.)

! :)

But since you ask :) :

• Can a QLabel put in scrollbars if required if the height is too big? I don't think so. You will recall I have said when I have got it working I will actually limit the height of the textedit to, say, 100px, and then rely on its scrolling behaviour for the user to be able to read the full text. This may be required because the dialog is generic, and might be used to display, say, a very long error text detail returned from somewhere.

• The app's stylesheets have a common rule for the display of QTextEdits which is suited to such read-only messages. I would have to write a separate rule for this case if I changed it to QLabel, or change all other occurrences in code where a QTextEdit is used in this situation.

• The end user may need to copy such (error) messages, e.g. for sending to support in an email. This is easy in a QTextEdit. Does a QLabel allow such easy select & paste? (I think you have to specify an option on QLabel to allow that.)

[JonB]

@SGaist
Yep, what you suggest does "work". But like @mrjj's solution it requires code to calculate the text height and then sets the QTextEdits maximum or fixed height.

@mrjj & I are "surprised" that there does not seem to be any QSizePolicy or flag which can make QTextEdit occupy the minimum vertical size necessary for its content, like, say, QLabel does. Is that indeed right? QTextEdit seems to have some in-built minimal height? Is that right, is that documented?