qt5.4.1->qt5.5.1 [5.9.6; 5.10.1] - OpenGL builds OK but apps don't see it

warpme

Hi,
I'm fighting with this issue since week...
I'm trying to upgrade qt from working 5.4.1 to newer version (5.5.1, 5.9.6 and 5.10.1) tested.
My app (mythtv) can't see OpenGL for any qt version newer than 5.4.1.

Short summary:

I have fully working qt5.4.1 in cross-compiled environment (minimyth2)
My qt upgrade to 5.5.1/5.9.6/5.10.1 is in exactly the same environment (recompile with new qt sources only)
Qt 5.5.1/5.9.6/5.10.1 configure reports "OpenGL desktop: yes"
Qt build reports NO ANY errors nor even warnings regarding OpenGL code
My app (mythtv) compiles also no any errors nor even warnings regarding OpenGL code
Any new version of qt (5.5.1/5.9.6/5.10.1) gives in my app "OpenGL not available"
App (mythtv) for sure works OK with qt5.5/5.9/5.10 (many users are using it with those Qt versions no problem)
My environment is: gcc7.3.0; glibc2.27; xorg1.19; mesa18.1.3.

As qt and mythtv build reports no single error nor warning related to OpenGL code - I simply don't have idea where to start...

Can somebody hint me how to move forward with this?

i.e. is there any possibility to enable extended checks during qt building to see where is my environment incompatibility causing qt to fail in providing OpenGL to app?

thx in advance!

ps: here is 5.9.5 my configure summary:

cat config.summary


Configuration: cross_compile sse2 sse3 ssse3 sse4_1 sse4_2 avx avx2 avx512f avx512bw avx512cd avx512dq avx512er avx512ifma avx512pf avx512vbmi avx512vl enable_new_dtags f16c largefile shared release c++11 concurrent dbus no-qml-debug reduce_exports reduce_relocations stl
Build options:
  Mode ................................... release
  Optimize release build for size ........ no
  Building shared libraries .............. yes
  Using C++ standard ..................... C++11
  Using ccache ........................... no
  Using gold linker ...................... no
  Using new DTAGS ........................ yes
  Using precompiled headers .............. no
  Using LTCG ............................. no
  Target compiler supports:
    SSE .................................. SSE2 SSE3 SSSE3 SSE4.1 SSE4.2
    AVX .................................. AVX AVX2 F16C
    AVX512 ............................... F ER CD PF DQ BW VL IFMA VBMI
  Build parts ............................ libs
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... yes
  Qt Gui ................................. yes
  Qt Network ............................. yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. yes
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... yes
  QML debugging .......................... no
  udev ................................... yes
  Using system zlib ...................... yes
Qt Core:
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ no
  GLib ................................... yes
  iconv .................................. no
  ICU .................................... yes
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  Using system PCRE2 ..................... no
Qt Network:
  getaddrinfo() .......................... yes
  getifaddrs() ........................... yes
  IPv6 ifname ............................ yes
  libproxy ............................... no
  OpenSSL ................................ yes
    Qt directly linked to OpenSSL ........ yes
  SCTP ................................... no
  Use system proxies ..................... yes
Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ yes
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ yes
  Fontconfig ............................. yes
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... yes
    PNG .................................. yes
      Using system libpng ................ yes
  EGL .................................... no
  OpenVG ................................. no
  OpenGL:
    Desktop OpenGL ....................... yes
    OpenGL ES 2.0 ........................ no
    OpenGL ES 3.0 ........................ no
    OpenGL ES 3.1 ........................ no
  Session Management ..................... no
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... no
  INTEGRITY HID .......................... no
  mtdev .................................. no
  tslib .................................. no
  xkbcommon-evdev ........................ yes
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. no
  LinuxFB ................................ yes
  VNC .................................... yes
  Mir client ............................. no
  X11:
    Using system-provided XCB libraries .. yes
    EGL on X11 ........................... no
    Xinput2 .............................. yes
    XCB XKB .............................. yes
    XLib ................................. yes
    XCB render ........................... yes
    XCB GLX .............................. yes
    XCB Xlib ............................. yes
    Using system-provided xkbcommon ...... yes
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows
Qt PrintSupport:
  CUPS ................................... no
Qt Sql:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. yes
  OCI (Oracle) ........................... no
  ODBC ................................... no
  PostgreSQL ............................. no
  SQLite2 ................................ no
  SQLite ................................. no
    Using system provided SQLite ......... no
  TDS (Sybase) ........................... no
QtXmlPatterns:
  XML schema support ..................... yes
Qt QML:
  QML interpreter ........................ yes
  QML network support .................... yes
Qt Quick:
  Direct3D 12 ............................ no
  AnimatedImage item ..................... yes
  Canvas item ............................ yes
  Support for Qt Quick Designer .......... yes
  Flipable item .......................... yes
  GridView item .......................... yes
  ListView item .......................... yes
  Path support ........................... yes
  PathView item .......................... yes
  Positioner items ....................... yes
  ShaderEffect item ...................... yes
  Sprite item ............................ yes
Qt Gamepad:
  SDL2 ................................... yes
Qt Wayland Client ........................ no
Qt Wayland Compositor .................... no
Qt Bluetooth:
  BlueZ .................................. no
  BlueZ Low Energy ....................... no
  Linux Crypto API ....................... no
Qt Sensors:
  sensorfw ............................... no
Qt Quick Controls 2:
  Styles ................................. Default Material Universal
Qt Quick Templates 2:
  Hover support .......................... yes
  Multi-touch support .................... yes
Qt Positioning:
  Gypsy GPS Daemon ....................... no
  WinRT Geolocation API .................. no
Qt Location:
  Geoservice plugins:
    OpenStreetMap ........................ yes
    HERE ................................. yes
    Esri ................................. yes
    Mapbox ............................... yes
    MapboxGL ............................. no
    Itemsoverlay ......................... yes
Qt Multimedia:
  ALSA ................................... yes
  GStreamer 1.0 .......................... yes
  GStreamer 0.10 ......................... no
  Video for Linux ........................ yes
  OpenAL ................................. no
  PulseAudio ............................. no
  Resource Policy (libresourceqt5) ....... no
  Windows Audio Services ................. no
  DirectShow ............................. no
  Windows Media Foundation ............... no

Note: Dropped compiler flags '-pthread' when detecting library 'glib'.

Note: When linking against OpenSSL, you can override the default
library names through OPENSSL_LIBS.
For example:
    OPENSSL_LIBS='-L/opt/ssl/lib -lssl -lcrypto' ./configure -openssl-linked

Note: Disabling X11 Accessibility Bridge: D-Bus or AT-SPI is missing.

Note: No wayland-egl support detected. Cross-toolkit compatibility disabled.

Note: Dropped compiler flags '-pthread' when detecting library 'gstreamer'.

Note: Dropped compiler flags '-pthread' when detecting library 'gstreamer_app'.

SGaist

Hi,

Since it seems to be MythTV specifically, you should consider contacting them for pointers on where to start debugging.

warpme

Unfortunately mythtv OpenGL works ok with on prebuild qt i.e. 5.5.1.
I tested it on my test archlinux setup with prebuild qt - to verify that issue isn't in mythtv...
Difference between test-bed (prebuild 5.5.1 qt on archlinux; works OK) and my project (minimyth2; working 5.4.1 updated to 5.5.1 not works) is:

in minimyth2 i'm cross compiling
minimyth2 has mesa18.1.3 (latest) while archlinux testbed has 11.1.2 mesa (archlinux has also other packages which are older - i.e. gcc or glibc - but I don't believe they are issue...)

So issue is in my build of qt - not in mythtv nor qt itself I think.
But I don't have idea how to move forward...

EDIT: I just downgrade mesa to 11.1.2 (this version with prebuild qt5.5.1 works OK on my reference archlinux.) and rebuild qt5.5.1 on minimyth2.
Unfortunately qt5.5.1 build from sources on minimyth2 still has broken OpenGL...

What next is worth to downgrade?
xcb?

SGaist

Let's sum up the situation:

What exact version of MythTV and Qt is working on what device ?
What is the target you are cross-compiling for ?
What does this device run as Linux distribution ?

warpme

What exact version of MythTV and Qt is working on what device ?

works:
mythtv: current mythtv-master; last working qt is 5.4.2
device: I'm not using -device declarations at configure stage. Instead I'm creating custom platform with toolchain information
not works:
mythtv: current mythtv-master; qt 5.5.0 or newer
device: see above

What is the target you are cross-compiling for ?

currently x86_64 (future: i386; armv7; aarch64)

What does this device run as Linux distribution ?

if got question correctly: minimyth2

Below is a bit more details how I'm building qt:

I'm cross-compiling Qt by creating dedicated platform with created custom qmake.
My custom qmake is based on qmake from "linux-g++-64".
Basically I do following:

1.create mkspec/linux-g++-64-garhost/qmake.conf by

cat linux-g++-64/qmake.conf >> qmake.conf
cat linux-g++-64/../common/linux.conf >> qmake.conf
cat linux-g++-64/../common/unix.conf >> qmake.conf
cat linux-g++-64/../common/gcc-base-unix.conf >> qmake.conf
cat linux-g++-64/../common/gcc-base.conf >> qmake.conf
cat linux-g++-64/../common/g++-unix.conf >> qmake.conf
cat linux-g++-64/../common/g++-base.conf >> qmake.conf
cat linux-g++-64/../common/shell-unix.conf >> qmake.conf

Updating variables in created qmake. Following variables are updated to cross-compile toolchain:

QMAKE_COPY
QMAKE_YACC
QMAKE_CC
QMAKE_CXX
QMAKE_LINK
QMAKE_LINK_SHLIB
QMAKE_AR
QMAKE_RANLIB
QMAKE_STRIP
QMAKE_CFLAGS
QMAKE_CFLAGS_RELEASE
QMAKE_LFLAGS
QMAKE_INCDIR
QMAKE_LIBDIR
QMAKE_INCDIR_X11
QMAKE_LIBDIR_X11
QMAKE_INCDIR_OPENGL
QMAKE_LIBDIR_OPENGL
QMAKE_INCDIR_EGL
QMAKE_LIBDIR_EGL

This process gives me custom qmake.conf. Here is file I'm using to build working 5.4.2 (and unfortunatelly no OpenGL 5.5.1):

[piotro@minimyth-dev linux-g++-64-garhost]$ cat qmake.conf
QMAKE_CFLAGS_RELEASE = -pipe -pipe -march=x86-64 -mtune=generic -O3 -mfpmath=sse -m64
#
# qmake configuration for linux-g++
#
# Written for GNU/Linux platforms that have both lib and lib64 directories,
# like the AMD Opteron.
#

MAKEFILE_GENERATOR      = UNIX
CONFIG                 += incremental
QMAKE_INCREMENTAL_STYLE = sublib

QMAKE_CFLAGS            = -m64
QMAKE_LFLAGS            = -Wl,--as-needed -pipe -pipe -march=x86-64 -mtune=generic -O3 -mfpmath=sse -m64 -m64



QMAKE_LIBDIR_X11        = /home/piotro/minimyth-dev/images/main/usr/lib
QMAKE_LIBDIR_OPENGL     = /home/piotro/minimyth-dev/images/main/usr/lib

#
# qmake configuration for common linux
#

QMAKE_PLATFORM         += linux

QMAKE_CFLAGS_THREAD    += -D_REENTRANT
QMAKE_CXXFLAGS_THREAD  += $$QMAKE_CFLAGS_THREAD
QMAKE_LFLAGS_GCSECTIONS = -Wl,--gc-sections

QMAKE_INCDIR            =/home/piotro/minimyth-dev/images/main/usr/include
QMAKE_LIBDIR            =/home/piotro/minimyth-dev/images/main/usr/lib
QMAKE_INCDIR_X11        =/home/piotro/minimyth-dev/images/main/usr/include
QMAKE_LIBDIR_X11        =/home/piotro/minimyth-dev/images/main/usr/lib
QMAKE_INCDIR_OPENGL     =/home/piotro/minimyth-dev/images/main/usr/include
QMAKE_LIBDIR_OPENGL     =/home/piotro/minimyth-dev/images/main/usr/lib
QMAKE_INCDIR_OPENGL_ES2 = $$QMAKE_INCDIR_OPENGL
QMAKE_LIBDIR_OPENGL_ES2 = $$QMAKE_LIBDIR_OPENGL
QMAKE_INCDIR_EGL        =/home/piotro/minimyth-dev/images/main/usr/include
QMAKE_LIBDIR_EGL        =/home/piotro/minimyth-dev/images/main/usr/lib
QMAKE_INCDIR_OPENVG     =
QMAKE_LIBDIR_OPENVG     =

QMAKE_LIBS              =
QMAKE_LIBS_DYNLOAD      = -ldl
QMAKE_LIBS_X11          = -lXext -lX11 -lm
QMAKE_LIBS_NIS          = -lnsl
QMAKE_LIBS_EGL          = -lEGL
QMAKE_LIBS_OPENGL       = -lGL
QMAKE_LIBS_OPENGL_ES2   = -lGLESv2
QMAKE_LIBS_OPENVG       = -lOpenVG
QMAKE_LIBS_THREAD       = -lpthread
QMAKE_LIBS_LIBUDEV      = -ludev

QMAKE_CFLAGS_WAYLAND    =
QMAKE_INCDIR_WAYLAND    =
QMAKE_LIBS_WAYLAND_CLIENT = -lwayland-client
QMAKE_LIBS_WAYLAND_SERVER = -lwayland-server
QMAKE_LIBDIR_WAYLAND    =
QMAKE_DEFINES_WAYLAND   =
QMAKE_WAYLAND_SCANNER   = wayland-scanner

QMAKE_CFLAGS_XCB        =
QMAKE_LIBS_XCB          =
QMAKE_DEFINES_XCB       =

QMAKE_AR                = x86_64-minimyth-linux-gnu-ar cqs
QMAKE_OBJCOPY           = objcopy
QMAKE_NM                = nm -P
QMAKE_RANLIB            =x86_64-minimyth-linux-gnu-ranlib

QMAKE_STRIP             = x86_64-minimyth-linux-gnu-strip
QMAKE_STRIPFLAGS_LIB   += --strip-unneeded

#
# qmake configuration for common unix
#

QMAKE_PLATFORM         += unix posix

QMAKE_LEX               = flex
QMAKE_LEXFLAGS         +=
QMAKE_YACC              = bison -y
QMAKE_YACCFLAGS        += -d
QMAKE_YACCFLAGS_MANGLE += -p $base -b $base
QMAKE_YACC_HEADER       = $base.tab.h
QMAKE_YACC_SOURCE       = $base.tab.c
QMAKE_PREFIX_SHLIB      = lib
QMAKE_PREFIX_STATICLIB  = lib
QMAKE_EXTENSION_STATICLIB = a
#
# Base qmake configuration for GCC on *nix-systems
#
# Before making changes to this file, please read the comment in
# gcc-base.conf, to make sure the change goes in the right place.
#
# To verify that your change has the desired effect on the final configuration
# you can use the manual test in tests/manual/mkspecs.
#


QMAKE_LFLAGS_SHLIB     += -shared
QMAKE_LFLAGS_PLUGIN    += $$QMAKE_LFLAGS_SHLIB
QMAKE_LFLAGS_SONAME    += -Wl,-soname,
QMAKE_LFLAGS_THREAD    +=
QMAKE_LFLAGS_RPATH      = -Wl,-rpath,
QMAKE_LFLAGS_RPATHLINK  = -Wl,-rpath-link,
QMAKE_LFLAGS_NEW_DTAGS  = -Wl,--enable-new-dtags
QMAKE_LFLAGS_USE_GOLD   = -fuse-ld=gold

# -Bsymbolic-functions (ld) support
QMAKE_LFLAGS_BSYMBOLIC_FUNC = -Wl,-Bsymbolic-functions
QMAKE_LFLAGS_DYNAMIC_LIST   = -Wl,--dynamic-list,
#
# This file is used as a basis for the following compilers:
#
# - The GNU C++ compiler (g++)
# - LLVM
# - Clang
#
# Platform-specific options shared by these compilers are put into:
#
# - gcc-base-mac.conf
# - gcc-base-unix.conf
#
# These base files are then combined with configurations for each compiler:
#
# - g++-base.conf
# - g++-macx.conf
# - g++-unix.conf
# - llvm.conf
# - clang.conf
#
# The combination happens in the top level mkspec, by including a platform-
# specific version of the base-file, for example gcc-base-mac.conf, and then
# a (possibly platform-specific) version of the actual compiler configuration,
# for example g++-macx.conf.
#
# If you are making changes to any of these files, please consider the
# possible effect it may have due to these include-rules, and whether it
# might make more sense to share the rule or make it more specific.
#
# To verify that your change has the desired effect on the final configuration
# you can use the manual test in tests/manual/mkspecs.
#

QMAKE_CFLAGS_OPTIMIZE      = -O2
QMAKE_CFLAGS_OPTIMIZE_FULL = -O3

QMAKE_CFLAGS               += -pipe
QMAKE_CFLAGS_DEPS          += -M
QMAKE_CFLAGS_WARN_ON       += -Wall -W
QMAKE_CFLAGS_WARN_OFF      += -w
QMAKE_CFLAGS_RELEASE       +=
QMAKE_CFLAGS_RELEASE_WITH_DEBUGINFO += $$QMAKE_CFLAGS_OPTIMIZE -g
QMAKE_CFLAGS_DEBUG         += -g
QMAKE_CFLAGS_SHLIB         += -fPIC
QMAKE_CFLAGS_STATIC_LIB    += -fPIC
QMAKE_CFLAGS_APP           += -fPIC
QMAKE_CFLAGS_ISYSTEM        =
QMAKE_CFLAGS_YACC          += -Wno-unused -Wno-parentheses
QMAKE_CFLAGS_HIDESYMS      += -fvisibility=hidden
QMAKE_CFLAGS_EXCEPTIONS_OFF += -fno-exceptions
QMAKE_CFLAGS_SPLIT_SECTIONS += -ffunction-sections
QMAKE_CFLAGS_LTCG           = -flto -fno-fat-lto-objects
QMAKE_CFLAGS_LTCG_FATOBJECTS = -ffat-lto-objects
QMAKE_CFLAGS_DISABLE_LTCG   = -fno-lto

QMAKE_CXXFLAGS            += $$QMAKE_CFLAGS
QMAKE_CXXFLAGS_DEPS       += $$QMAKE_CFLAGS_DEPS
QMAKE_CXXFLAGS_WARN_ON    += $$QMAKE_CFLAGS_WARN_ON
QMAKE_CXXFLAGS_WARN_OFF   += $$QMAKE_CFLAGS_WARN_OFF
QMAKE_CXXFLAGS_RELEASE    += $$QMAKE_CFLAGS_RELEASE
QMAKE_CXXFLAGS_RELEASE_WITH_DEBUGINFO += $$QMAKE_CFLAGS_RELEASE_WITH_DEBUGINFO
QMAKE_CXXFLAGS_DEBUG      += $$QMAKE_CFLAGS_DEBUG
QMAKE_CXXFLAGS_SHLIB      += $$QMAKE_CFLAGS_SHLIB
QMAKE_CXXFLAGS_STATIC_LIB += $$QMAKE_CFLAGS_STATIC_LIB
QMAKE_CXXFLAGS_APP        += $$QMAKE_CFLAGS_APP
QMAKE_CXXFLAGS_YACC       += $$QMAKE_CFLAGS_YACC
QMAKE_CXXFLAGS_HIDESYMS   += $$QMAKE_CFLAGS_HIDESYMS -fvisibility-inlines-hidden
QMAKE_CXXFLAGS_EXCEPTIONS_OFF += $$QMAKE_CFLAGS_EXCEPTIONS_OFF
QMAKE_CXXFLAGS_SPLIT_SECTIONS += $$QMAKE_CFLAGS_SPLIT_SECTIONS
QMAKE_CXXFLAGS_LTCG        = $$QMAKE_CFLAGS_LTCG
QMAKE_CXXFLAGS_LTCG_FATOBJECTS = $$QMAKE_CFLAGS_LTCG_FATOBJECTS
QMAKE_CXXFLAGS_DISABLE_LTCG   = $$QMAKE_CFLAGS_DISABLE_LTCG

QMAKE_LFLAGS           +=
QMAKE_LFLAGS_DEBUG     +=
QMAKE_LFLAGS_APP       +=
QMAKE_LFLAGS_RELEASE   +=
QMAKE_LFLAGS_RELEASE_WITH_DEBUGINFO +=
QMAKE_LFLAGS_EXCEPTIONS_OFF +=
QMAKE_LFLAGS_LTCG       = $$QMAKE_CFLAGS_LTCG -fuse-linker-plugin

QMAKE_CFLAGS_SSE2      += -msse2
QMAKE_CFLAGS_SSE3      += -msse3
QMAKE_CFLAGS_SSSE3     += -mssse3
QMAKE_CFLAGS_SSE4_1    += -msse4.1
QMAKE_CFLAGS_SSE4_2    += -msse4.2
QMAKE_CFLAGS_AVX       += -mavx
QMAKE_CFLAGS_AVX2      += -mavx2
QMAKE_CFLAGS_NEON      += -mfpu=neon

# Wrapper tools that understand .o/.a files with GIMPLE instead of machine code
QMAKE_AR_LTCG           = gcc-ar cqs
QMAKE_NM_LTCG           = gcc-nm -P
QMAKE_RANLIB_LTCG       = true          # No need to run since gcc-ar has "s"

#
# Qmake configuration for the GNU C++ compiler on *nix-systems
#
# Before making changes to this file, please read the comment in
# gcc-base.conf, to make sure the change goes in the right place.
#
# To verify that your change has the desired effect on the final configuration
# you can use the manual test in tests/manual/mkspecs.
#


QMAKE_LFLAGS_RELEASE   += -Wl,-O1
QMAKE_LFLAGS_NOUNDEF   += -Wl,--no-undefined
#
# Qmake configuration for the GNU C++ compiler
#
# Before making changes to this file, please read the comment in
# gcc-base.conf, to make sure the change goes in the right place.
#
# To verify that your change has the desired effect on the final configuration
# you can use the manual test in tests/manual/mkspecs.
#

QMAKE_COMPILER          = gcc

QMAKE_CC                = x86_64-minimyth-linux-gnu-gcc

QMAKE_LINK_C            = $$QMAKE_CC
QMAKE_LINK_C_SHLIB      = $$QMAKE_CC

QMAKE_CXX               = x86_64-minimyth-linux-gnu-g++

QMAKE_LINK              = x86_64-minimyth-linux-gnu-g++
QMAKE_LINK_SHLIB        = x86_64-minimyth-linux-gnu-g++

QMAKE_PCH_OUTPUT_EXT    = .gch

QMAKE_CFLAGS_PRECOMPILE       = -x c-header -c ${QMAKE_PCH_INPUT} -o ${QMAKE_PCH_OUTPUT}
QMAKE_CFLAGS_USE_PRECOMPILE   = -include ${QMAKE_PCH_OUTPUT_BASE}
QMAKE_CXXFLAGS_PRECOMPILE     = -x c++-header -c ${QMAKE_PCH_INPUT} -o ${QMAKE_PCH_OUTPUT}
QMAKE_CXXFLAGS_USE_PRECOMPILE = $$QMAKE_CFLAGS_USE_PRECOMPILE

QMAKE_CXXFLAGS_CXX11    = -std=c++0x
QMAKE_LFLAGS_CXX11      =
warning("shell-unix.conf is deprecated and has no effect.")
load(qt_config)

Next I'm building qt with following configure parameters:

CONFIGURE_ARGS = \
	-prefix $(DESTDIR)$(qt5prefix) \
	-bindir $(DESTDIR)$(qt5bindir) \
	-libdir $(DESTDIR)$(qt5libdir) \
	-docdir $(DESTDIR)$(qt5prefix)/doc \
	-headerdir $(DESTDIR)$(qt5includedir) \
	-datadir $(DESTDIR)$(qt5libdir) \
	-translationdir $(DESTDIR)$(qt5prefix)/translations \
	-sysconfdir $(DESTDIR)$(qt5libdir)/settings \
	-examplesdir $(DESTDIR)$(qt5prefix)/examples \
	-hostprefix $(DESTDIR)$(qt5prefix) \
	-platform linux-g++-64 \
        -xplatform linux-g++-64-garhost \
	-shared \
	-largefile \
	-confirm-license \
	-release \
	-opensource \
	-opengl \
	-no-rpath \
	-no-optimized-qmake \
	-plugin-sql-mysql \
	-no-sql-db2 \
	-no-sql-ibase \
	-no-sql-oci \
	-no-sql-odbc \
	-no-sql-psql \
	-no-sql-sqlite \
	-no-sql-sqlite2 \
	-no-sql-tds \
	-no-compile-examples \
	-no-gtkstyle \
	-no-openvg \
	-nomake tools \
	-nomake examples \
	-skip qttranslations \
	-skip qtserialport \
	-skip qtwebengine \
	-skip qtwebkit-examples \
	-verbose \

Above procedure works very well for qt up to 5.5.0 family. Since 5.5.0 build is perfectly clean - but opengl is not recognised by mythtv...

If anybody is interested - here are full build logs for 5.4.2 (opengl working) and 5.5.1 (OpenGL not working)
5.4.2 log
5.5.1 log

SGaist

Do you know how MythTV does the OpenGL detection.

From a quick look at the logs, there's some differences in the EGLFS and KMS in the output.

warpme

@SGaist said in qt5.4.1->qt5.5.1 [5.9.6; 5.10.1] - OpenGL builds OK but apps don't see it:

Do you know how MythTV does the OpenGL detection.

From a quick look at the logs, there's some differences in the EGLFS and KMS in the output.

Ah - Yes. Logs from 5.5.1 build are with improved custom qmake where I started to add dependencies in hope that it will help. Difference regarding EGLFS/KMS are result of adding EGL related includes/libs from mesa

QMAKE_INCDIR_EGL        =/home/piotro/minimyth-dev/images/main/usr/include
QMAKE_LIBDIR_EGL        =/home/piotro/minimyth-dev/images/main/usr/lib

But this obviously not helps :-(

What intriguing me that:
-issue appearance is aligned exactly to qt release change: 5.4->5.5
-5.5.1 build from sources is perfectly clean (IMHO)
-prebuild 5.5.1 on achlinux with the same mythtv works OK

I don't see issue with my approach of cross-compiling Qt (it is working for me since years starting with qt4.8 and latter with qt5.3 and 5.4) - but maybe changes in 5.5 are prohibiting my way? But why 5.5.1 build is so clean?

anyway: myth checking opengl here:
https://github.com/MythTV/mythtv/blob/bc20ba5a9a3bea4f5eb7ce5bf6c3e3f7e43f9e34/mythtv/libs/libmythui/mythmainwindow.cpp#L1142

SGaist

Did you check whether the Archlinux version of Qt uses any special configuration stuff ?

warpme

@SGaist said in qt5.4.1->qt5.5.1 [5.9.6; 5.10.1] - OpenGL builds OK but apps don't see it:

Did you check whether the Archlinux version of Qt uses any special configuration stuff ?

Of course. Arch has no any special things except:
-archlinux is not cross-compiling
-it has enabled (+ required dependencies) for all graphics variants (wayland, etc)

here is arch build script:
qt5.11 archlinux build script

SGaist

Strange, they disable the examples but still build the tests...

Anyway, from what architecture are you cross-compiling from ?

warpme

@SGaist said in qt5.4.1->qt5.5.1 [5.9.6; 5.10.1] - OpenGL builds OK but apps don't see it:

Strange, they disable the examples but still build the tests...

Anyway, from what architecture are you cross-compiling from ?

underlying os where build system runs is archlinux
build system is GAR (GAR it is make based environment to build since scratch complete toolchain and next cross build all packages to create target appliance called minimyth2
target system is minimyth2

Architecturally:

underlying os is x86_64 (can be anything)
GAR is x86_64
minimyth2 can be: i386, x86_64, armv7 and aarch64

so far I have well working minimyth2 with qt5.4.1 for: i386, x86_64 and aarch64 (bcm2837). armv7 not tested yet.

So answering Your question: I'm cross compiling from x86_64 (GAR) to x86_64 (chosen minimyth2 target architecture in this exercise).

SGaist

Ok, so in fact, your current test setup isn't really cross-compiling since you start and end with the exact same architecture.

What hardware are you using to run minimyth2 ?

warpme

@SGaist said in qt5.4.1->qt5.5.1 [5.9.6; 5.10.1] - OpenGL builds OK but apps don't see it:

Ok, so in fact, your current test setup isn't really cross-compiling since you start and end with the exact same architecture.

Well - I would say: it IS cross compiling but in this exercise build, host and target are all x86_64. But only cpu arch is single common part.
All other vital components (gcc, glibc, binutils, kernel, qt, etc are different).

So pls don't be mislead: situation that build and target have declared the same architecture not means that there is no cross-compile.

What hardware are you using to run minimyth2 ?

It is any x86 or selected armv7 / aarch64 (bcm2837 tested)
For x86 I have users with: Intel NUC, ION1, ION2, multiple AMD (Kabini, Richland, etc).
Basically I'm supporting any x86 CPU and 1503 gfx cards out-of-box (with full auto detection and auto-configure)

warpme

I started to play with myth code to see what qt5.10.1 provides.
After disabling OpenGL checks I started to see:

QXcbIntegration: Cannot create platform OpenGL context, neither GLX nor EGL are enabled

Of course I have libglx.so in /home/piotro/minimyth-dev/images/main/usr/lib/xorg/modules/extensions.

qt config summary also says GLX on X11:yes

X11:
  Using system-provided XCB libraries .. yes
  EGL on X11 ........................... yes
  Xinput2 .............................. yes
  XCB XKB .............................. yes
  XLib ................................. yes
  XCB render ........................... yes
  XCB GLX .............................. yes
  XCB Xlib ............................. yes
  Using system-provided xkbcommon ...... yes
  Native painting (experimental) ....... yes

What are other possible reasons for such error?

SGaist

I wonder if it's a question of libraries versions.

sierdzio

Consider running conifugre with verbose flag - you'll be able to see what libs it is looking for an maybe whether there are some warnings popping up.

warpme

@SGaist said in qt5.4.1->qt5.5.1 [5.9.6; 5.10.1] - OpenGL builds OK but apps don't see it:

I wonder if it's a question of libraries versions.

I was thinking about this as well.
I made test build with qt build-in xcb (assuming bundled xcb for sure is OK).
OpenGL still not works.
Currently I think qt5.5+ has changed opengl subsystem in a way that my cross-build procedure earlier described in this thread (my message from 8 days ago) will not work anymore.

I think it is qt bug as:

conceptually procedure is OK (IMHO)
procedure works for qt5.4 and earlier
qt5.10 configure says Yes in all places where needed
qt5.10 build reports no errors nor related warnings

warpme

@sierdzio
Pls look at my earlier post where I put links to full build log with -verbose flag in configure.
Pls look at 5.5.1.log (as 5.5 is first qt ver. where opengl not works for me.)
Maybe You will discover something meaningful in build log.
I can't :-(

warpme

ok - I found it.
Issue was typo in filename of xcbintegration libs in my install script. argh....
5.4.x family don't have those libs while 5.5+ has.
I added images of those libs to boot image - but 2 letters in filename were in reverse order....

thx anybody who was trying to help me!

SGaist

Glad you found out and thanks for sharing !

What was the additional file you had wrong ?