Led Like buttons/Widgets

Bruschetta

@mrjj
with the dll now i see the widget in the Designer.
Anyway if i use it in i have serveral errors.

In particular i tried to create the PRI file containing:

INCLUDEPATH += $$PWD
HEADERS += $$PWD/qled.h
SOURCES += $$PWD/qled.cpp

That i added to the plugin and the project file

Whan i try to compile now i get this error

mingw32-make[1]: *** No rule to make target '../../QTProjects-New/Alpha2/qled.cpp', needed by 'debug/qled.o'. Stop.:

What i'm doing wrong with this pri files?
Is again mingw fault?

mrjj

@Bruschetta
Hi.
seems fine.
I have not tried this yet.
No, should not be mingw fault. :)

maybe we be need
QT += QLed

Sounds like its not linking the plugin but I not sure if that will do it.

I also really want to know how to do this the right way. as I think its very little needed to fully work but
not sure what it is.

Bruschetta

@mrjj
Unfortunately for me .pri files are not working, neither copying the qled.h and qled.cpp into the project.

I got those warnings during compile time

warning: 'virtual const QMetaObject* QLed::metaObject() const' redeclared without dllimport attribute: previous dllimport ignored
 warning: 'void QLed::setOffColor(QLed::ledColor)' redeclared without dllimport attribute: previous dllimport ignored
.
.

and errors

QTProjects\build-Alpha2-Desktop_Qt_5_7_0_MinGW_32bit-Debug/debug/moc_qled.cpp:151: undefined reference to `_imp___ZN4QLed10setOnColorENS_8ledColorE
QTProjects\build-Alpha2-Desktop_Qt_5_7_0_MinGW_32bit-Debug/debug/moc_qled.cpp:153: undefined reference to `_imp___ZN4QLed8setShapeENS_8ledShapeE
.
.

tried to add qledplugin.dll as lib in the .pro file too without success.

Have you any suggestion ? :)
Thanks again for the attention and time

mrjj

Yes. If you remove the QDESIGNER_WIDGET_EXPORT
from the qled.h it will link and run
as in

class /*QDESIGNER_WIDGET_EXPORT*/ QLed : public QWidget {

You also need the qres in PRI file
qled.pri

QT += svg
INCLUDEPATH += $$PWD
HEADERS += $$PWD/qled.h
SOURCES += $$PWD/qled.cpp

RESOURCES += $$PWD/qled.qrc

Note that this is slightly hack-ish as you need QDESIGNER_WIDGET_EXPORT when compiling as plugin.
But not when using it via .PRI file.

Bruschetta

@mrjj
you have been fast as lightning! And it's working! Thahks a lot!

mrjj

@Bruschetta
Super :)

BlackDogWhite

@mrjj You have been very helpful to @Bruschetta and I'm wondering if you will go a little further.

The Qleds57.zip file is no longer in your drop box. Would you mind terribly putting up a copy again? Or a 5.10 version?

I'm trying to walk through this as a beginner and keep running into roadblocks.

mrjj

@BlackDogWhite
Surely
Here is similar sample
https://www.dropbox.com/sh/mnaipp7apodqp0d/AABkpILwRICtBxd-5lK0CcUSa?dl=0

Make sure to open UseTheLeds.pro
in the UseTheLeds subfolder.
It show a led using .pri inclusion. That is it compiles the leds into the project.

There is also qledplugin.pro that compiles it as a plugin.
Note that to use it as a plugin, you need the visual studio compiler to make it loadable by
Creator. (mingw wont work)

Using .pri inclusion, you dont have a plugin, but can use promotion. ( as UseTheLeds.pro shows)

While a plugin, offers design time settings of properties, you can access the promoted led in code
using ui->ledname and hence get almost the same.

Let me know if you want to create a plugin. I didnt test if that part just works
but UseTheLeds surely runs on 5.10

BlackDogWhite

@mrjj Thank you for sharing those files. I was able to open the UseTheLeds project, run it, modify it and all was cool.

But then I tried to add another instance of the qLed, both by promotion (drag a Containers->Widget onto the form; rtClk->Promote ) and by coping the already working qLed object. Neither of these worked. Adding to the MainWindow constructor

ui->qLed_2->setShape(QLed::Circle);  // the "copied" version of qLed
ui->MyQled->setShape(QLed::Circle); // the promoted container widget

would cause the compile to fail because neither qLed_2 nor MyQled were members of Ui::MainWindow.

Obviously I've skipped an important step. Probably something to do with ui_mainwindow.h. Am I supposed to edit that manually (I don't think so, but it's not getting updated automatically)?

Hints??

BlackDogWhite

@mrjj
ohhhh, I must not have something set up properly, maybe because this was just a demo. But when I add stuff to the ui, the ui_mainwindow.h file is created up and over in a build-UseTheLeds-Desktop_blah_blah-Debug directory. So that .h file has references to MyQled and qLed_2.

Must be something screwed up in my environment.

mrjj

@BlackDogWhite
hi, nope something up with usetheleds demo as copying
the promoted several time didnt show many lights.
Ill will report back when i have a look at it :)

BlackDogWhite

@mrjj well, it may also be my environment, sadly. I'm trying to figure out Qt, both on the PC and on a Raspberry Pi 3, using MS Visual Studio (which I'm pretty familiar with), along with QT VS Tools and VisualGDB.

I can get your demo (UseTheLeds) working under Qt Creator (except for the above referenced problem) and displaying on the PC
I also have a working GUI program developed on the PC (with VS, Qt VS Tools, and VisualGDB) that runs both on the PC and squirts down to the Pi.
But trying to add the Qled code to the working GUI program breaks everything, possibly in part because the cross compiler chain (c:\sysgcc\raspberry...) cannot find QtSvg includes. When I search for QtSvg, I find it but only in a qt4 dir chain (SysGCC\raspberry\arm-linux-gnueabihf\sysroot\usr\include\qt4...)

Ouch, I'm getting a headache!

mrjj

@BlackDogWhite
Hi
Do you need it to be very scale able ?
Else we could use png for the leds if getting the SVG module to the Pi is
difficult.

However, there was something odd wiht the sample. i will link a new one here as soon as its weekend :)

BlackDogWhite

@mrjj First off, I'm up for any help someone is willing to offer. A revised version would be very useful, if only to study the differences and learn something else about how all this works.

I'm going to look, hopefully this afternoon, where my cross compiler install went wrong. Maybe I can get that upgraded to Qt5 so the SVG stuff works. But I certainly wouldn't mind seeing how it would work with PNG's!

mrjj

@BlackDogWhite

Hi
Here is other sample that allows copy paste of promoted widget.
Im not sure what was up with the other. the ui file seemed stale.

Anyway, this works. the go button show random shape and color.
I have included only bare minimum of qled files to work.

alt text

https://www.dropbox.com/s/kfti0otv9ez9u28/Myleds.zip?dl=0

BlackDogWhite

@mrjj Thanks MrJJ. I was able to copy your code and create a project from scratch using the QLed class to render a button. On the UI I drag in a Widget object and promote it to QLed. It shows up just fine. This is all in Qt Creator 4.5.1, Qt 5.10.1 and Visual Studio 2013 for the compiler.

I was also able to get it to work on the Raspberry Pi using VS 2013 along with Qt VS Tools and VisualGDB added in.

Still have quite a bit to learn, never having done Qt or Pi before. But with your help I've made good progress. Maybe I'll get bold and actually try to get the plugin to work as well, but that's pretty low priority.

Thank you for all your help. You da man!
Ron

mrjj

@BlackDogWhite
Super :)
well crosscompiling is not easy. So good work.
Since you already have visual studio, it might not be huge work to get the plugin running
but in this case it offer not so much besides seeing the leds in designer and setting type and
color directly in Designer. ( you could also do that with dynamic properties as they are
added to the actual widget type also when using promotion)

viniltc

@mrjj

I'm a beginner, I also came across the same problem to add a status LED in my GUI. @mrjj : unable to download the code from the mentioned link. It will be very useful if you can summarize the procedure.

many thanks

mrjj

@viniltc
Hi
Link is still ok
https://www.dropbox.com/s/kfti0otv9ez9u28/Myleds.zip?dl=0
just tested

viniltc

@mrjj Thanks a lot.
I just noticed 'layout' feature is disabled for QLed widget.
Please find below the screenshot. How can I enable Layout to QLed class?