QSslSocket segmentation fault on static build

kshegunov

Please run readelf -l <appname> and post the output here.

luca

@kshegunov This is the output:

Elf file type is EXEC (Executable file)
Entry point 0x4036a0
There are 6 program headers, starting at offset 64

Program Headers:
  Type           Offset             VirtAddr           PhysAddr
                 FileSiz            MemSiz              Flags  Align
  LOAD           0x0000000000000000 0x0000000000400000 0x0000000000400000
                 0x0000000000bdeee8 0x0000000000bdeee8  R E    0x200000
  LOAD           0x0000000000bdfdd0 0x00000000011dfdd0 0x00000000011dfdd0
                 0x000000000009543c 0x00000000000ad298  RW     0x200000
  NOTE           0x0000000000000190 0x0000000000400190 0x0000000000400190
                 0x0000000000000044 0x0000000000000044  R      0x4
  TLS            0x0000000000bdfdd0 0x00000000011dfdd0 0x00000000011dfdd0
                 0x0000000000000070 0x00000000000000c8  R      0x8
  GNU_STACK      0x0000000000000000 0x0000000000000000 0x0000000000000000
                 0x0000000000000000 0x0000000000000000  RW     0x10
  GNU_RELRO      0x0000000000bdfdd0 0x00000000011dfdd0 0x00000000011dfdd0
                 0x000000000001f230 0x000000000001f230  R      0x1

 Section to Segment mapping:
  Segment Sections...
   00     .note.ABI-tag .note.gnu.build-id .rela.plt .init .plt .text __libc_freeres_fn __libc_thread_freeres_fn .fini .rodata .qtversion .qtmetadata .stapsdt.base __libc_subfreeres __libc_IO_vtables __libc_atexit __libc_thread_subfreeres .eh_frame .gcc_except_table 
   01     .tdata .preinit_array .init_array .fini_array .jcr .data.rel.ro .got .got.plt .data .bss __libc_freeres_ptrs 
   02     .note.ABI-tag .note.gnu.build-id 
   03     .tdata .tbss 
   04     
   05     .tdata .preinit_array .init_array .fini_array .jcr .data.rel.ro .got

kshegunov

This file doesn't contain an interpreter section (also the reason why ldd fails). If it has dependencies on any shared libraries (in the LOAD sections) it will fail to load them. Could you also run: readelf -d <appname> to see what's going on there?

Also it could be useful to provide the compile and link lines you have when building the binary for the system in question.

luca

@kshegunov
The output of readelf -d is:

There is no dynamic section in this file.

The linker string is:

-static -lcrypto -lssl -L/opt/qt563-static/lib -L/opt/qt563-static/plugins/sqldrivers -lqsqlite -lqsqlmysql -lmariadbclient -lQt5Sql -L/opt/qt563-static/plugins/bearer -lqconnmanbearer -lqgenericbearer -lqnmbearer -lQt5Network -lQt5DBus -lQt5Core -lz -lqtpcre -lm -ldl -lrt -lpthread

I just rebuilt and I noted a warning at the end of the build:

/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libmariadbclient.a(client_plugin.c.o): In function `mysql_load_plugin_v':
(.text+0x4f3): warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/opt/qt563-static/lib/libQt5Core.a(qfilesystemengine_unix.o): In function `QFileSystemEngine::resolveGroupName(unsigned int)':
qfilesystemengine_unix.cpp:(.text+0x9fd): warning: Using 'getgrgid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libmariadbclient.a(mf_pack.c.o): In function `unpack_dirname':
(.text+0x842): warning: Using 'getpwnam' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libmariadbclient.a(libmysql.c.o): In function `read_user_name':
(.text+0x2368): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libmariadbclient.a(mf_pack.c.o): In function `unpack_dirname':
(.text+0x855): warning: Using 'endpwent' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/opt/qt563-static/lib/libQt5Core.a(qfilesystemengine_unix.o): In function `QFileSystemEngine::resolveUserName(unsigned int)':
qfilesystemengine_unix.cpp:(.text+0x6c5): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libmariadbclient.a(client.c.o): In function `mysql_real_connect':
(.text+0x524f): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libmariadbclient.a(libmysql.c.o): In function `mysql_server_init':
(.text+0x2117): warning: Using 'getservbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking

could it be the reason of the segmentation fault on some Linux servers?

kshegunov

I think now I understand what's going on and why this happens. Your build is rather odd, but in short it goes like this:
You have linked not only the static libraries, but have required a static linkage(!), which means that when you build the application the linker will go to the libraries your application depends on, see what's the address of each of methods you use and write it down directly into the binary (that's why you get the warnings as well).

Usually one depends on the loader ("dynamic linker" on linux) to do the symbol resolution just after the application starts (before main(), however this is not the case here, there's no interpreter for the binary. The main implication is that if the binary layout of any one of the libraries you need has the changed, then you'd call an invalid address from the application thus the process will gloriously crash.

Now, my advice is to do the usual linking, as it's much less error prone in that particular regard. Remove LIBS += -static and rebuild. Then you should be able to inspect the binary with ldd and you should also see the interpreter being included in the ELF header. What you'd expect is to see afterwards from readelf -l for file type is "Elf file type is DYN (Shared object file)" and ldd should provide you with the list of dependencies. (You can still link the static Qt build, as you do now, if you so desire, this is not impeded).

luca

@kshegunov
Thanks for the explaination.
I understand what you said but I need a completely static build to avoid publishing all required libs on my server.

By googling again I found a parameter to pass to configure when compiling static Qt:

-openssl-linked

This tells Qt to link directly to openssl instead of using dlopen (internally). This could be the reason for segfault when executing:

new QSslSocket(this);

Now I'm rebuilding Qt. At the end I'll try again to see if it solves the problem.
I'll keep you updated.

kshegunov

@luca said in QSslSocket segmentation fault on static build:

I need a completely static build to avoid publishing all required libs on my server.

Then you need to provide the static binaries for all the libraries you use, which will include openssl ...
The fact that you've said you want static application, does not remove the need to satisfy the dependencies. As @jsulm wrote before - even if you compile Qt statically, given that Qt depends on openssl, means one of the two things:

you provide an openssl static build, so Qt will incorporate the archive directly into the binary

or

you don't provide a static openssl build and then Qt depends on the dynamic library, which translates to your application (after linking) depending on the same dynamic library.

And this applies to every dependency of Qt, your application or any external library you use, not only to openssl.

luca

@kshegunov
My Debian distro already has both version (static and shared) for all the library I need.

I finally solved by building the static version of Qt using -openssl-linked in the configure command.
Without that parameter it compile static version of Qt but it load openssl library at runtime with dlopen().
That's the cause of the segfault when creating QSslSocket object.

Thanks all for help!

kshegunov

@luca said in QSslSocket segmentation fault on static build:

My Debian distro already has both version (static and shared) for all the library I need.

Then you do provide the static binaries for the dependencies, which would fall into 1) from above post. I'm glad it worked out in the end.

luca

@kshegunov
I already provided the static version of openssl but without -openssl-linked when building the static Qt it continued to use the shared at runtime for QSslSocket.
Now it's linked with the static version of openssl and doesn't require shared openssl at runtime anymore.