Building Qt5 for cross-compilling to Raspberry Pi error

sierdzio

Configure prints a summary after it finishes. If it didn't in your case, something went wrong.

I recommend following this guide https://wiki.qt.io/RaspberryPi2EGLFS it definitely works.

sierdzio

You can also run configure in verbose mode to see exactly what goes wrong.

Vertebro

@sierdzio Thanks, I will try that tutorial !
I made the configure with verbose option, and after creating qmake, it adds that "make : nothing to do for 'first'", so it seems that something is going wrong but I can't see what.

sierdzio

@Vertebro said in Building Qt5 for cross-compilling to Raspberry Pi error:

@sierdzio Thanks, I will try that tutorial !
I made the configure with verbose option, and after creating qmake, it adds that "make : nothing to do for 'first'", so it seems that something is going wrong but I can't see what.

Until you post more info here (like the output you're getting), we can't see what's wrong, too.

Vertebro

@sierdzio Okay sorry, here is the output :

nathan@BTSSNIR-8:~/opt/qt5/qtbase$ sudo ./configure -opengl es2 -device linux-rasp-pi-g++ -device-option CROSS_COMPILE=~/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /mnt/rasp-pi-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5pi -hostprefix /usr/local/qt5pi -v
<srcbase> = /home/nathan/opt/qt5/qtbase 
<bldbase> = /home/nathan/opt/qt5/qtbase 
<outbase> = /home/nathan/opt/qt5/qtbase 
Creating qmake...
make: rien à faire pour « first ».
Command line: -opengl es2 -device linux-rasp-pi-g++ -device-option CROSS_COMPILE=/home/nathan/opt/gcc-4.7-linaro-rpi-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /mnt/rasp-pi-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5pi -hostprefix /usr/local/qt5pi -v

This is the Qt Open Source Edition.

You have already accepted the terms of the Open Source license.

Running configuration tests...
Done running configuration tests.

Configure summary:

Building on: linux-g++ (x86_64, CPU features: mmx sse sse2)
Building for: devices/linux-rasp-pi-g++ (arm, CPU features: <none>)
Configuration: cross_compile compile_examples enable_new_dtags largefile precompile_header shared rpath release c++11 concurrent dbus reduce_exports release_tools stl
Build options:
  Mode ................................... release; optimized tools
  Optimize release build for size ........ no
  Building shared libraries .............. yes
  Using C++ standard ..................... C++11
  Using ccache ........................... no
  Using gold linker ...................... no
  Using new DTAGS ........................ yes
  Using precompiled headers .............. yes
  Using LTCG ............................. no
  Target compiler supports:
    NEON ................................. no
  Build parts ............................ libs
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... no
  Qt Gui ................................. yes
  Qt Network ............................. yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. yes
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... yes
  udev ................................... no
  Using system zlib ...................... yes
Qt Core:
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ no
  GLib ................................... no
  iconv .................................. yes
  ICU .................................... no
  Tracing backend ........................ <none>
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  Using system PCRE2 ..................... no
Qt Network:
  getifaddrs() ........................... yes
  IPv6 ifname ............................ yes
  libproxy ............................... no
  Linux AF_NETLINK ....................... yes
  OpenSSL ................................ no
    Qt directly linked to OpenSSL ........ no
  OpenSSL 1.1 ............................ no
  SCTP ................................... no
  Use system proxies ..................... yes
Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ yes
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. no
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... no
    PNG .................................. yes
      Using system libpng ................ yes
  EGL .................................... no
  OpenVG ................................. no
  OpenGL:
    Desktop OpenGL ....................... no
    OpenGL ES 2.0 ........................ no
    OpenGL ES 3.0 ........................ no
    OpenGL ES 3.1 ........................ no
    OpenGL ES 3.2 ........................ no
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... no
  INTEGRITY HID .......................... no
  mtdev .................................. no
  tslib .................................. no
  xkbcommon-evdev ........................ no
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. no
  LinuxFB ................................ yes
  VNC .................................... yes
  Mir client ............................. no
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows
Qt PrintSupport:
  CUPS ................................... no
Qt Sql:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. no
  OCI (Oracle) ........................... no
  ODBC ................................... no
  PostgreSQL ............................. no
  SQLite2 ................................ no
  SQLite ................................. yes
    Using system provided SQLite ......... no
  TDS (Sybase) ........................... no

Note: Also available for Linux: linux-clang linux-icc

Note: -optimized-tools is not useful in -release mode.

ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed.

ERROR: The OpenGL functionality tests failed!
You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2],
QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform.

Here you go, but I extracted the most important info in my last post I think, but if you want the output here it is

sierdzio

Ok, I see 3 issues here:

you run configure via sudo... that's not good. Not necessarily an error, but there is certainly no need for root permissions when compiling Qt
you're running configure from qtbase dir instead of the main configure from Qt (from root Qt dir). But maybe that's specific to the way this tutorial works
your OpenGL tests are failing! This means that configure has not actually finished, so no wonder that Makefile is missing or empty! You need to fix the OpenGL issue first and then try to run clean and configure again

Vertebro

I finally managed to complete the process by using your tutorial.
I added to qt creator and done everything, it compiles fine, but it won't run :

pi@raspi_15:~ $ ./RPItest
-bash: ./RPItest: cannot execute binary file: Exec format error

What append ?

Vertebro

Okay everything done ! I messed up a bit. Cross compilation is working;

Now my only problem is to get libmysqlcppconn to work on raspberry pi 3.

sierdzio

Nice, congrats!

Unfortunately I've never used Qt & MySQL together on a RPi so I (probably) can't help with that.

Vertebro

Thanks ! DOn't worry now that cross compilation works everything will go smooth, I'll probably use python for sql if I don't succeed with c++ and sql

SGaist

Hi,

You'll likely have to use the MariaDB package to be able to build the plugin for RPi.

Hope it helps