qt 5.10.1 cross compile for raspberry pi 3 in debian stretch

sierdzio

Most probably that comes from bad symlinks in your sysroot. Make sure you run sysroot-relativelinks.py

sdttn

I tried that, it doesnt resolve the problem. What are those errors telling us? I am not quite sure what is going on with these errors though.

sierdzio

@sdttn said in qt 5.10.1 cross compile for raspberry pi 3 in debian stretch:

I tried that, it doesnt resolve the problem.

Weird, it worked for me (with Qt 5.10.0 and 5.9.4). Try going to the website this file comes from and checking out if there is a newer version of the script.

What are those errors telling us? I am not quite sure what is going on with these errors though.

The errors tell us that the sysroot or toolchain are broken. Basic C++ functionalities are not available.

sdttn

I think toolchain is broken...not sure how to fix it though...May be I am supposed to edit some files and export some path etc.

sierdzio

@sdttn said in qt 5.10.1 cross compile for raspberry pi 3 in debian stretch:

I think toolchain is broken...

I don't think so. Last commit in RPi toolchain repo is from a month ago - and I used it to compile 5.9.4 and 5.10.0, it worked.

sierdzio

I've just tried, it works, with 5.10.1.

Make sure you properly rsync'ed your sysroot from your raspbery pi, then run the symlink fix script again. I'm pretty certain that's the issue.

sdttn

@sierdzio said in qt 5.10.1 cross compile for raspberry pi 3 in debian stretch:

Make sure you properly rsync'ed your sysroot from your raspbery pi, then run the symlink fix script again. I'm pretty certain that's the issue.

Have you used the qtbase or from the source file qt-everywhere-opensource-src-5.7.0.tar.gz.
I have tried again and still getting the same errors. May be I should try Qt 5.10.0 instead of Qt 5.10.1.

Kind regards,

sierdzio

I've used qt-everywhere-src-5.10.1.tar.xz for the test above. I have also successfully compiled 5.10.0 and 5.9.4 with the same sysroot and toolchain.

sdttn

OK. This is really weird. What am I missing. I have done everything.... including fixing the sysroot folder. Because I just tried even with the 5.10.0 still didnt work.

sierdzio

Dunno. I'm on Ubuntu and not Debian Stretch, but I doubt this is of any relevance here.

Perhaps it's about some detail on the wiki, I was not following it word for word (mostly because I'm setting up prefixes and folders differently - but the toolchain+sysroot is the same. Plus additionally, I'm running on a live Pi and not the OS image).

I did have exactly the issue you had, and in my case running the symlink fix did the trick. One idea - check the version of your symlink script, perhaps some new commit spoiled it or something. Mine is from ~11 January 2018. Actually, let me send it to you, here you go: https://www.dropbox.com/s/1alp65bf2lenrjj/sysroot-relativelinks-1.10-priv.py?dl=0

sdttn

@sierdzio said in qt 5.10.1 cross compile for raspberry pi 3 in debian stretch:

I did have exactly the issue you had, and in my case running the symlink fix did the trick

Thank @sierdzio I ll try with your file along with couple of other things and I ll put the results here. But I am glad you get the same error too, I have started to think that I am crazy :)

I am not sure what version of raspberry pi is installed on the machine though, I havent put fresh OS in RPI3. There was already some OS in it. That might be an issue. The second possibility could be the OS on my desktop side (debian stretch).
These are the possibilities that I can come up with just right now.

Like I said I will try and let you know.
Thank you for your kind responses.

Regards,

sdttn

hi @sierdzio once again,

I have tried the file from the link you have given but this time I got the error as below.

g++: error trying to exec 'cc1plus': execvp: No such file or directory
Makefile:242: recipe for target 'main.o' failed
make: *** [main.o] Error 1

This time I have tried for both 5.10.0 and 5.10.1 still on debian stretch installed on virtual machine.
Thanks,

sierdzio

This one I've not met before.

SGaist

Hi,

Might be a silly question but do you have g++ installed ?

sdttn

Hi @SGaist,

which g++ are you talking about? You mean this
apt-get install g++
Then yes. Interestingly something happened, I was trying for 5.9.4 and it didint even configure with ./config
Now it keeps giving me the error

g++: error trying to exec 'cc1plus': execvp: No such file or directory
Makefile:242: recipe for target 'main.o' failed
make: *** [main.o] Error 1

Right before that I was getting pcre_compile.o failed kind of error.

This is really getting messy. Not sure what to do at this point though.

SGaist

I’d start by verifying that you can use g++ for a simple hello world application.

I’d also double check the installation of the development tools.

sdttn

Hi again,

After I am able to compile, I was trying to make an example code which is a simple push button changes the text and I have gotten the error below.
By the way instead of using linaro gcc and g++, I used the one that I have installed with the command

apt-get install gcc-arm-linux-gnueabihf
apt-get install g++-arm-linux-gnueabihf

I am not sure what the problem is though. Do you think that at some point my compilers and debuggers got mixed up.? Thats my best guess though. I am open for any ideas.

/usr/bin/arm-linux-gnueabihf-g++ -mfloat-abi=hard --sysroot=/root/raspi/sysroot -Wl,-rpath,/usr/local/qt5pi/lib -Wl,-rpath-link,/root/raspi/sysroot/opt/vc/lib -Wl,-rpath-link,/root/raspi/sysroot/usr/lib/arm-linux-gnueabihf -Wl,-rpath-link,/root/raspi/sysroot/lib/arm-linux-gnueabihf -o testRPI3 main.o mainwindow.o moc_mainwindow.o   -L=/opt/vc/lib -L/root/raspi/qt5pi/lib -lQt5Widgets -lQt5Gui -lQt5Core -L/root/raspi/sysroot/usr/lib/arm-linux-gnueabihf -lGLESv2 -lpthread 
main.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
Makefile:245: recipe for target 'testRPI3' failed
make: *** [testRPI3] Error 1
05:40:53: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project testRPI3 (kit: Raspberry Pi 3 )
When executing step "Make"
05:40:53: Elapsed time: 00:00.

Kind regards,

jsulm

@sdttn Looks like you compiled all the *.o files with a different compiler. You should clean up and rebuild.

sdttn

@sdttn said in qt 5.10.1 cross compile for raspberry pi 3 in debian stretch:

apt-get install gcc-arm-linux-gnueabihf
apt-get install g++-arm-linux-gnueabihf

Can I use these three including gdb as well. Are these correct tools? or Should I use the linaro one...

apt-get install gcc-arm-linux-gnueabihf
apt-get install g++-arm-linux-gnueabihf
apt-get install gdb-multiarch

jsulm

@sdttn You should not mix binaries built with different compilers. Either you build everything with gcc-arm-linux-gnueabihf or you build everything with the Linaro toolchain. That's why I suggested to cleanup and rebuild: to get rid of all *.o files and build everything with same compiler.