Cross compile setup for TI processor

Rlkcpo

@Pablo-J.-Rogina said in Cross compile setup for TI processor:

@Rlkcpo on one hand, you may want to take a look at the support for Qt framework TI is/was? providing for its Sitara product, so at some point TI is aware of Qt :-)
On the other hand, this post mentions that Keystone devices "... do not have any kind of graphics hardware, display hardware, or multimedia acceleration ...".

I don't know anything about the device, but if that assertion is (partially)true, the question is why are you interested in using Qt framework? Although Qt is perfect for developing multi-platform non-GUI applications (one source code, several platforms to run it) are you sure Qt is a good fit? Are you porting some application already built using Qt to this device?

Least but not last, in any event that you know your device is supported somehow by Yocto, you may want to take a look at these posts here and here about integrating Qt/Qt Creator with devices via Yocto.

Hey Pablo,

Thanks for the reply. I have looked into the documentation that TI has for Sitara. As they supply all the required files (specifically a qmake.conf file and a /sysroot directory) that are specific to that processor, it doesn't really help me much.

I have been speaking directly with the reps at TI and they seem as confused as you as to why we would want to put Qt on the keystone ii. Let me just say that Qt is much more powerful then a simple framework to make pretty GUIs. Especially in embedded systems. The overhead is negligible and the speed with which our new developers grasp the concepts is absolutely amazing.

I might be wrong here but I don't believe Yocto is going to help me either. Im still going to need to create a qmake binary and try to piece together a sysroot directory for my specific processor.

Pablo J. Rogina

@Rlkcpo I agree with you, and I'm a great advocate of, using Qt framework for developing non-GUI applications as well. It provides a good set of different modules (i.e. networking, command line parsing, XML processing, etc. etc.) that speed up developing and help maintaining non-GUI applications with C++ for a good set of different platforms.
Good luck with the remaining work ahead!

Rlkcpo

Ok so I "think" I am making some progress. I think I found what might be considered my devices sysroot thanks to @jsulm in my devices /usr directory. I just copied that entire directory to my local machine and am using it as my sysroot (correct me please if this is wrong).

I am now ready to create my Qt version and qmake. I ran the configure tool with these options:

./configure -xplatform linux-TIarmv7-g++ -opensource -skip qt3d -skip qtactiveqt -skip qtandroidextras -skip qtcanvas3d -skip qtcharts -skip qtconnectivity -skip qtdatavis3d -skip qtdeclarative -skip qtdoc -skip qtgamepad -skip qtgraphicaleffects -skip qtimageformats -skip qtlocation -skip qtmacextras -skip qtmultimedia -skip qtnetworkauth -skip qtpurchasing -skip qtquickcontrols -skip qtquickcontrols2 -skip qtscxml -skip qtsensors -skip qtspeech -skip qtsvg -skip qttranslations -skip qtvirtualkeyboard -skip qtwayland -skip qtwebchannel -skip qtwebengine -skip qtwebglplugin -skip qtwebview -skip qtwinextras -skip qtxmlpatterns -verbose -shared -confirm-license -no-force-asserts -no-feature-accessibility -no-feature-gui -sysroot /scratchnobackup/usr

It creates the binary and this is my output:

This is the Qt Open Source Edition.

You have already accepted the terms of the Open Source license.

Running configuration tests...
Done running configuration tests.

Configure summary:

Building on: linux-g++ (x86_64, CPU features: mmx sse sse2)
Building for: linux-TIarmv7-g++ (arm, CPU features: neon)
Configuration: cross_compile use_gold_linker compile_examples enable_new_dtags largefile neon precompile_header shared rpath release c++11 c++14 c++1z concurrent dbus no-pkg-config no-gui reduce_exports stl no-widgets
Build options:
  Mode ................................... release
  Optimize release build for size ........ no
  Building shared libraries .............. yes
  Using C++ standard ..................... C++1z
  Using ccache ........................... no
  Using gold linker ...................... yes
  Using new DTAGS ........................ yes
  Using precompiled headers .............. yes
  Using LTCG ............................. no
  Target compiler supports:
    NEON ................................. yes
  Build parts ............................ libs examples
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... no
  Qt Gui ................................. no
  Qt Network ............................. yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. no
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... no
  QML debugging .......................... yes
  udev ................................... no
  Using system zlib ...................... no
Qt Core:
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ no
  GLib ................................... no
  iconv .................................. yes
  ICU .................................... no
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  Using system PCRE2 ..................... no
Qt Network:
  getifaddrs() ........................... yes
  IPv6 ifname ............................ yes
  libproxy ............................... no
  OpenSSL ................................ no
    Qt directly linked to OpenSSL ........ no
  SCTP ................................... no
  Use system proxies ..................... yes
Qt Gui:
  Accessibility .......................... no
  FreeType ............................... yes
    Using system FreeType ................ no
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. no
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... no
    PNG .................................. yes
      Using system libpng ................ no
  EGL .................................... no
  OpenVG ................................. no
  OpenGL:
    Desktop OpenGL ....................... no
    OpenGL ES 2.0 ........................ no
    OpenGL ES 3.0 ........................ no
    OpenGL ES 3.1 ........................ no
    OpenGL ES 3.2 ........................ no
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... no
  INTEGRITY HID .......................... no
  mtdev .................................. no
  tslib .................................. no
  xkbcommon-evdev ........................ no
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. no
  LinuxFB ................................ yes
  VNC .................................... yes
  Mir client ............................. no
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows
Qt PrintSupport:
  CUPS ................................... no
Qt Sql:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. no
  OCI (Oracle) ........................... no
  ODBC ................................... no
  PostgreSQL ............................. no
  SQLite2 ................................ no
  SQLite ................................. yes
    Using system provided SQLite ......... no
  TDS (Sybase) ........................... no
Qt SerialBus:
  Socket CAN ............................. yes
  Socket CAN FD .......................... yes

Note: Also available for Linux: linux-clang linux-icc

WARNING: Accessibility disabled. This configuration of Qt is unsupported.

Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into '/scratchnobackup/usr/usr/local/Qt-5.10.0'.

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

I then run $make

arm-linux-gnueabihf-g++ --sysroot=/scratchnobackup/usr --sysroot=/scratchnobackup/usr -Wl,-O1 -fuse-ld=gold -Wl,--enable-new-dtags -Wl,-rpath,/usr/local/Qt-5.10.0/lib -o qt    -lpthread 
/usr/lib/gcc-cross/arm-linux-gnueabihf/5/../../../../arm-linux-gnueabihf/lib/../lib/crt1.o(.text+0x28): error: undefined reference to 'main'
collect2: error: ld returned 1 exit status
Makefile:106: recipe for target 'qt' failed
make: *** [qt] Error 1

In the past I have seen this before but it was usually because of the binary wasn't to be used as an executable and forgot the -c linker flag. Thanks in advance for any assistance.

jsulm

@Rlkcpo said in Cross compile setup for TI processor:

-sysroot /scratchnobackup/usr

remove usr from the sysroot path:

-sysroot /scratchnobackup

Rlkcpo

Thanks for the help @jsulm, I really appreciate it.

Unfortunately that didn't fix it.

arm-linux-gnueabihf-g++ --sysroot=/scratchnobackup -Wl,-O1 -fuse-ld=gold -Wl,--enable-new-dtags -Wl,-rpath,/usr/local/Qt-5.10.0/lib -o qt    -lpthread 
/usr/lib/gcc-cross/arm-linux-gnueabihf/5/../../../../arm-linux-gnueabihf/lib/../lib/crt1.o(.text+0x28): error: undefined reference to 'main'
collect2: error: ld returned 1 exit status
Makefile:106: recipe for target 'qt' failed
make: *** [qt] Error 1

jsulm

@Rlkcpo Maybe you should start from a clean source tree (it is better to do out of source builds).

Rlkcpo

Im not sure what you mean. Are you suggesting I reinstall Qt?

jsulm

@Rlkcpo Not reinstalling Qt. It looks like you did not use out of source builds, so all build artefacts are inside Qt source code tree and can effect later builds. Just unpack Qt source code and try from this clean state.

Rlkcpo

I think im following you. Currently my source folder is /scratchnobackup/Qt5.10/5.10.0/Src

You want me to move the Src directory outside of the Qt install directory and run configure again correct?

jsulm

@Rlkcpo No. What I suggest is: delete Src directory and extract Qt sources again.

Rlkcpo

I used the online installer. It all installs to the same directory. Ii saw some posts earlier about building Qt from source off of git. Let me see if I can find that again.

Rlkcpo

I ran the installer again to try and see if I could just get the sources and if you select Qt and tunnel into that there is a separate sources folder you can select.

Im sorry if I ask too many questions about this. I have used Qt in an embedded environment for a while now but I have never had to install it. So all of this is new to me.

Rlkcpo

Ok I installed the source again in a different directory (/scratchnobackup/QtSource/5.10.0/Src)and am still getting the same error.
(ran without defining a sysroot, as well as with it defined as /scratchnobackup/usr and just /scratchnobackup)

arm-linux-gnueabihf-g++ --sysroot=/scratchnobackup --sysroot=/scratchnobackup -Wl,-O1 -fuse-ld=gold -Wl,--enable-new-dtags -Wl,-rpath,/usr/local/Qt-5.10.0/lib -o qt    -lpthread 
/usr/lib/gcc-cross/arm-linux-gnueabihf/5/../../../../arm-linux-gnueabihf/lib/../lib/crt1.o(.text+0x28): error: undefined reference to 'main'
collect2: error: ld returned 1 exit status
Makefile:106: recipe for target 'qt' failed
make: *** [qt] Error 1