Save QSet using QSettings

SGaist

@mpergand said in Save QSet using QSettings:

QVariant::load: unable to load type 1092

You have to implement the corresponding stream operators see qRegisterMetaTypeStreamOperators

mpergand

@SGaist
Yes, I supposed something like that.
That's strange, you can serialize a QSet as is with QDataStream, but not with QVariant !

user4592357

@SGaist

thanks, that's what i needed.

this is how i did it. i set breakpoints to on operator << and >> to see how they work, but i can't spot the mistake. when i read the settings, i.e writeSettings() function, i get one more invalid entry read from in-stream. of course i can check its validity but i wanna understand where it comes from:

void HighScores::readSettings() {
	QSettings settings { m_sSettingsFile, QSettings::IniFormat };

	const auto highScores = settings.value("highScores");

	if(highScores.isValid())
		m_highScores = highScores.value<QVariantMultiMap_t>();
	else
		m_highScores = QVariantMultiMap_t {};
}

void HighScores::writeSettings() const {
	QSettings settings { m_sSettingsFile, QSettings::IniFormat };

	settings.setValue("highScores", qVariantFromValue(m_highScores));
}

QDataStream &operator<<(QDataStream &out, const HighScores::QVariantMultiMap_t &mmap) {
	const auto mmapEnd = mmap.constEnd();
	for(auto it = mmap.constBegin(); it != mmapEnd; ++it)
		out << it.key() << it.value();
	return out;
}

QDataStream &operator>>(QDataStream& in, HighScores::QVariantMultiMap_t& mmap) {
	QVariant key;
	QString value;
	while(!in.atEnd()) {
		in >> key >> value;
		mmap.insert(key, value);
	}
	return in;
}

where

using QVariantMultiMap_t = QMultiMap<QVariant, QString>;
QMultiMap<QVariant, QString> m_highScores;

i've put Q_DECLARE_METATYPE(HighScoresPage::QVariantMultiMap_t) in header file after class declaration, and qRegisterMetaTypeStreamOperators<QVariantMultiMap_t>("QVariantMultiMap_t"); in constructor

which part am i doing wrong?

mpergand

I found a similar topic with a clear anwser :
[https://forum.qt.io/topic/78161/custom-class-serialize-with-qdatastream](link url)

I made a test with a QSet<QString>

typedef QSet<QString>  QStringSet;
Q_DECLARE_METATYPE(QStringSet)

int main(int argc, char *argv[])
{
    qRegisterMetaTypeStreamOperators<QStringSet>("QStringSet");
    QString home=QDir::homePath();
    QString iniFileName="config.ini";
    QString iniPath=home+"/"+iniFileName;
    QSettings settings(iniPath,QSettings::IniFormat);

    QStringSet setIn;
    QVariant varIn;
    setIn<<"A"<<"B"<<"C";

    // save
    varIn.setValue(setIn);
    settings.setValue("Set",varIn);

    // load
    QVariant varOut=settings.value("Set");
    QStringSet setOut=varOut.value<QStringSet>();

qDebug()<<"in "<<setIn;
qDebug()<<"out"<<setOut;

return 0;
}

For QSet, no << operator needed, just to declare the type.
All seems to work and the ini file looks good.

user4592357

my code actually works, but not correctly

the part that goes wrong in my code is in while loop in QDataStream &operator>>(QDataStream& in, HighScores::QVariantMultiMap_t& mmap). i check the stream using

while(!in.atEnd()) {
    // read from stream 
}

when i have, say, 1 element in the container, the saving of it in stream is done correctly. however, when reading from the stream, the execution enter the loop one time, and then one more extra time and i get an invalid element saved in container

p.s.
i tried with QStringSet but with this things are worse, writing to settings is okay, but reading always returns QVariant::Invalid:

void UsernamePage::readSettings() {

	QSettings settings { filePath, QSettings::IniFormat };
	const auto usernames = settings.value("usernames"); // <-- returns Invalid
	if(usernames.isValid())
		m_usernames = usernames.value<QStringSet_t>();
	else
		m_usernames = QStringSet_t {};
}

void UsernamePage::writeSettings() const {

	QSettings settings { filePath, QSettings::IniFormat };
	settings.setValue("usernames", qVariantFromValue(m_usernames));
}

QDataStream &operator<<(QDataStream &out, const ChooseUsernamePage::QStringSet_t &sset) {
	const auto ssetEnd = sset.constEnd();
	for(auto it = sset.constBegin(); it != ssetEnd; ++it)
		out << *it;
	return out;
}

QDataStream &operator>>(QDataStream &in, ChooseUsernamePage::QStringSet_t &sset) {
	QString username;
	while(!in.atEnd()) {
		in >> username;
		sset.insert(username);
	}
	return in;
}

mpergand

If you are using QSet or QMap, you don't need to implement the << operator cause it's alreday the case. You only need to declare the type.

Example with a QMap:

typedef QMap<QString,QVariant>  Map;
qRegisterMetaTypeStreamOperators<Map>("Map");

    Map mapIn;
    QVariant varIn;
    mapIn["string"]="Hello";
    mapIn["num"]=1000;
    // save
    varIn.setValue(mapIn);
    settings.setValue("Map",mapIn);

    // load
    varOut=settings.value("Map");
    Map mapOut=varOut.value<Map>();

qDebug()<<"in "<<mapIn;
qDebug()<<"out"<<mapOut;

Logs:

in  QMap(("num", QVariant(int, 1000))("string", QVariant(QString, "Hello")))
out QMap(("num", QVariant(int, 1000))("string", QVariant(QString, "Hello")))

You only need to implement the stream ops for your custom classes.

[edit] QMap is a wrong example because it's already managed by QVariant :)

It's only needed fot QSet !

user4592357

@mpergand i still get invalid qvariant :(

mpergand

My Example of HighScores implementation.
I'm using a custom class Gamer:

struct Gamer
{
    QString name;
    int highScore;

};

Q_DECLARE_METATYPE(Gamer)

QDataStream &operator<<(QDataStream &out, const Gamer &gamer) {

    out<<gamer.name<<gamer.highScore;

    return out;
}

QDataStream &operator>>(QDataStream &in, Gamer &gamer) {

    in>>gamer.name;
    in>>gamer.highScore;

    return in;
}
// for qDebug logs
QDebug operator<<(QDebug debug, const Gamer &gamer)
{
    debug<<gamer.name<<", "<<gamer.highScore;
    return debug;
}

Saving HighScores in a QList<Gamer>:

using  HighScores=QList<Gamer>;
qRegisterMetaTypeStreamOperators<HighScores>("HighScores");

Gamer g1{"John", 1200};
Gamer g2{"Irvin", 2200};
Gamer g3{"Lisa", 2140};

HighScores scores;
scores<<g1<<g2<<g3;
QVariant v; v.setValue(scores);
settings.setValue("HighScores",v);

// load
 v=settings.value("HighScores");
scores=v.value<HighScores>();
qDebug()<<scores;

Output of scores:

("John", 1200, "Irvin", 2200, "Lisa", 2140)

user4592357

@mpergand that works but something's wrong with my code i guess?

user4592357

i have a deadline so for now i'll use QStringList instead of QSet<Qstring>. after it i'll (hopefully) try to find what was the problem