Multi serial port application

aha_1980

You didn't understand me. I said, with your task you can create one object containing the logic and the UI to talk to a serial device. There may be small differences between the devices, but I'm sure this can be configured. Once you have this object working (you can test it alone with one or all devices), you instantiate three instances of this object and let them run together.

I don't know if you need threads, that's up to you. I guess you will need not and threads usually complicate things a lot, so I would avoid it.

Regarding the UI <-> QSerialPort coupling: Have you already looked at and understand the Terminal example? [1]

Regards

[1] http://doc.qt.io/qt-5/qtserialport-terminal-example.html

veera

@aha_1980
okay thanks for the valuable reply i am sharing the code here for collecting all the parameters from gui storing into my structure for opening the serial ports .and how to set the mark and space parity ,i have to use the termios structure ?

void Dialog::on_set_pushButton_clicked()
{

QString Setbutton = ui->set_pushButton->text();
if (Setbutton == "setPort1" )
{
    QString port1 = ui->port_comboBox->currentText();
    QString serPort1 = "ttyS4";

    DevSettings.port_name = port1;
    QString dev_name = "/dev/";
    QString dev_port = dev_name + port1;
    //qDebug () << "dev_port name is " << dev_port;
    DevSettings.port_name = dev_port;
    qDebug() << "DevSettings.port_name " << DevSettings.port_name;
    QString p1_speed = ui->speed_comboBox->currentText();
    QString p1_start = ui->start_comboBox->currentText();
    QString p1_stop = ui->stop_comboBox->currentText();
    QString p1_parity = ui->parity_comboBox->currentText();
    QString p1_data = ui->data_comboBox->currentText();
    QString p1_hwflow = ui->hwflow_comboBox->currentText();
    QString p1_swflow = ui->swflow_comboBox->currentText();
    bool p1_log   = ui->log_checkBox->checkState();
    QString p1_interval = ui->Interval_comboBox->currentText();


    DevSettings.baudRate = p1_speed;
    DevSettings.startbit = p1_start.toInt();
    DevSettings.parity = p1_parity;
    DevSettings.StopBits = p1_stop;
    DevSettings.hwflowControl = p1_hwflow;
    DevSettings.swflowControl = p1_swflow;
    DevSettings.dataBits = p1_data;
    DevSettings.logfileEnabled =p1_log;
    DevSettings.SerialPort_Interval = p1_interval;
    qDebug() << DevSettings.baudRate << DevSettings.startbit << DevSettings.parity << DevSettings.StopBits << DevSettings.hwflowControl <<  DevSettings.swflowControl <<  DevSettings.dataBits <<  DevSettings.logfileEnabled << DevSettings.SerialPort_Interval;

    }

}

veera

here is my structure in dialog.h

enum portWindow
{
WINDOW_1
,WINDOW_2
,WINDOW_3
};

    struct Settings {
        FILE *fd;
        QString port_name;
        QString baudRate;
        QString dataBits;
        qint64 startbit;
        QString parity;
        QString StopBits;
        QString hwflowControl;
        QString swflowControl;
        bool logfileEnabled;
        QString SerialPort_Interval;
        enum portWindow serialPortWindow;
    };

    Settings DevSettings;

and project files are

SOURCES +=
main.cpp
dialog.cpp
serialappparams.cpp

HEADERS +=
dialog.h
serialappparams.h

FORMS +=
dialog.ui

aha_1980

@veera said in multi serial port application:

okay thanks for the valuable reply i am sharing the code here for collecting all the parameters from gui storing into my structure for opening the serial ports .

I'm not sure if you need to store the data separately: you have it in the UI and you set them in the QSerialPort object. IMHO there's no need to cache them again... There is some caching in the Terminal example, but mostly because the data is transported from the settings dialog to the main window.

and how to set the mark and space parity ,i have to use the termios structure ?

With http://doc.qt.io/qt-5/qserialport.html#parity-prop ?

veera

@aha_1980
How would you know the which port is sending the port information ,how i need to handle this problem????

aha_1980

@veera said in multi serial port application:

@aha_1980
How would you know the which port is sending the port information ,how i need to handle this problem????

Sorry, but I don't understand your question.

As said, I would start creating ONE object (maybe a QPanel) configuring ONE serial port, sending data to ONE serial port and receiving data from ONE serial port. If you have this working, it's easy to have three of them so you can communicate with all serial ports.

veera

Hi @aha_1980 ,
I am working for single port now ,its not able to open the port here is my code by using send pushbutton and connect()

void Dialog :: open_serialport()
{
QSerialPort serial;
QString portName = ui->port_comboBox->currentText();
qDebug() << "The portName is " << portName;
bool currentPortNameChanged = false;
QString currentPortName;
if(currentPortName != portName)
{
currentPortName = portName;
currentPortNameChanged = true;
}

if(currentPortName.isEmpty())
{
    qDebug() << "No port name specified";
}

if(currentPortNameChanged)
{
    serial.close();
    serial.setPortName(portName);
    qDebug() << "portName" << portName;

    if(!serial.open(QIODevice::ReadWrite))
    {
        qDebug() << "can not able to open the serial port";
    }
}

}
its giving error i am passing from gui ,please help me out....

mrjj

@veera said in multi serial port application:

void Dialog :: open_serialport()
{
QSerialPort serial; <<<< WRONG ! its local variable

make it a class member of Dialog

veera

@mrjj ,
just now declared a QSerialPort as data members of the dialog class in dialog.h still also i am getting same error...

here is the declaration of the QSerialPort

#ifndef DIALOG_H
#define DIALOG_H

#include <QDialog>
#include <stdio.h>
#include <QtSerialPort/QSerialPort>


namespace Ui {
class Dialog;
}

class Dialog : public QDialog
{
    Q_OBJECT

public:
    QSerialPort serial;

mrjj

Super
but what error ?

veera

can not able to open the serial port..what was the type its receiving whether its ttyS4 or /dev/ttyS4?

veera

@mrjj ,
I am directly assigning the portname from gui qcombox is it correct way for accessing the port name ?

mrjj

Hi
normally its ttyS4
for
serial->setPortName(p.name);

Did you see the sample
http://doc.qt.io/qt-5/qtserialport-terminal-example.html

Its available directly in Creator and you can use to test.

veera

yes i have refer that example only.....

veera

i have tried both the things not able to open the port .....

mrjj

@veera

so are you sure PC has that port ?

if using a serial usb adapter, it has other name.

If you cannot open port using the Terminal sample then
something is wrong outside Qt.

veera

yes having two ports only ttyS4 and ttyS5 i am not using any usb to serial converter i am directly connecting with serial port only .....i have tried terminal example its giving the permission error means sudo permission .....

veera

permission is denied error while opening the port in Terminal Sample...

jsulm

@veera What does

ls -lh /dev/ttyS4

say?

mrdebug

Are you in dialout group?