Configuration is faulty. Check the Issues view for details. Error while building/deploying project unti (kit: Desktop Qt 5.6.2 MSVC2015 64bit) When executing step "Make"
-
And now this (again)
-
And now this (again)
And now this (again)
Do you have an anti-virus application interfering?
Also I have noted that your projects are stored in folders with lots of spaces in folder names. This is certainly allowed in windows, but in general not a good idea. However, that is apparently not causing your current problems.
-
And now this (again)
Do you have an anti-virus application interfering?
Also I have noted that your projects are stored in folders with lots of spaces in folder names. This is certainly allowed in windows, but in general not a good idea. However, that is apparently not causing your current problems.
Even a Lawyer or a Historian can ask him.herself "Wow, the number of slashes, subdirectories or extended paths, or spaces among name letters, could not prohibit a c++ based software -that is actually used also in Aerospace Industry- from working properly. I am never going to fly again!!!"
Now, I did again what Mr Chris inducted, but still there is the same intro message: "Plugin initialization failed. The maintenance tool at C:\Qt/MaintenanceTool.exe is not an executable. Check your installation".
If you really viable idea, please let me know. I really dislike (actually I am tired by) wasting time on issues that do not regard to my knowledge. Uh, yes, regarding the antivirus, yes, there was a kind of block I had not noticed, but even though I disactivated antivirus, there was a kind of slight improvement on finding sothing like UWP etc. But when clicked 'Next', then a new type of blockage arrived. 4 days spent like that....
Thanx anyway!P.S.: Don't the qt programmers intervene?? Don't they offer any kind of assistance????
-
Even a Lawyer or a Historian can ask him.herself "Wow, the number of slashes, subdirectories or extended paths, or spaces among name letters, could not prohibit a c++ based software -that is actually used also in Aerospace Industry- from working properly. I am never going to fly again!!!"
Now, I did again what Mr Chris inducted, but still there is the same intro message: "Plugin initialization failed. The maintenance tool at C:\Qt/MaintenanceTool.exe is not an executable. Check your installation".
If you really viable idea, please let me know. I really dislike (actually I am tired by) wasting time on issues that do not regard to my knowledge. Uh, yes, regarding the antivirus, yes, there was a kind of block I had not noticed, but even though I disactivated antivirus, there was a kind of slight improvement on finding sothing like UWP etc. But when clicked 'Next', then a new type of blockage arrived. 4 days spent like that....
Thanx anyway!P.S.: Don't the qt programmers intervene?? Don't they offer any kind of assistance????
@GeorgeV
- P.S.: Don't the qt programmers intervene?? Don't they offer any kind of assistance????
This is a user driven forum and the developers do not monitor it.
Paying customers can request direct support from the company.I think there is something wrong with your pc.
I never saw anything like "Plugin initialization failed" from the many times i have installed Qt.
Nor has that error been shown here in forum.For test, you can try
https://download.qt.io/archive/qt/5.8/5.8.0/qt-opensource-windows-x86-mingw530-5.8.0.exe
if that fails to install and just work, your ram is damaged or the disk or virus scanner is malfunctioning.Note its mingw compiler and u seem to want to use visual studio but its just for test as its all in one packet and
so far i never had a singe issue with it. So would be good test to see if that just works or fails. -
@GeorgeV
- P.S.: Don't the qt programmers intervene?? Don't they offer any kind of assistance????
This is a user driven forum and the developers do not monitor it.
Paying customers can request direct support from the company.I think there is something wrong with your pc.
I never saw anything like "Plugin initialization failed" from the many times i have installed Qt.
Nor has that error been shown here in forum.For test, you can try
https://download.qt.io/archive/qt/5.8/5.8.0/qt-opensource-windows-x86-mingw530-5.8.0.exe
if that fails to install and just work, your ram is damaged or the disk or virus scanner is malfunctioning.Note its mingw compiler and u seem to want to use visual studio but its just for test as its all in one packet and
so far i never had a singe issue with it. So would be good test to see if that just works or fails.@mrjj Alright, memory diagnostics were fine, HHD are just fine, frankly speaking, the disks are in great condition, the HHD@5400rpm was literally unused. Antivirus has been disactivated. I am not arrogant, but I deny to install x86_5.8.0.exe because I consider it as intelligence belittlement and devaluation. If you have any further ideas, please, let me know. Thank you all!
-
@mrjj Alright, memory diagnostics were fine, HHD are just fine, frankly speaking, the disks are in great condition, the HHD@5400rpm was literally unused. Antivirus has been disactivated. I am not arrogant, but I deny to install x86_5.8.0.exe because I consider it as intelligence belittlement and devaluation. If you have any further ideas, please, let me know. Thank you all!
@GeorgeV
Ok good. so we ruled out memory corruption while saving
or bad sectors on the drive.There is no direct link to vs21017 Qt 5.9 ( i could see) so if u deny to test with the other (5.8), i have no further ideas to check if it's the online installer doing something odd or what is going on.
Since pc can download and install all of visual studio 2017, i assume
nothing wrong with net as you would have seen corruption too there.So as i see it, it must be the online installer acting up. ( normally it can be scanner running while downloading/installing ,
but you have this disabled (i hope))So im out of ideas for this unique error.
-
@GeorgeV
Ok good. so we ruled out memory corruption while saving
or bad sectors on the drive.There is no direct link to vs21017 Qt 5.9 ( i could see) so if u deny to test with the other (5.8), i have no further ideas to check if it's the online installer doing something odd or what is going on.
Since pc can download and install all of visual studio 2017, i assume
nothing wrong with net as you would have seen corruption too there.So as i see it, it must be the online installer acting up. ( normally it can be scanner running while downloading/installing ,
but you have this disabled (i hope))So im out of ideas for this unique error.
@mrjj thanx. It is alright. Thanx anyway! Look, when cool, I will try your proposition. But I feel that there is going to be no success. Atmel studio, vs, comodo, all progs work fine, not even a single bit of failure during installation.
Just a qt talent less in this vain world!!!
-
Well comodo (also seen Avast do it) can block stuff for the installer but it sounds like you also tested without it running.
So I guess its not the normal block case. ( then later files are missing)
I could only find the plugin error mentioned here
https://bugreports.qt.io/browse/QTCREATORBUG-10049And i checked my installation.
Its not even enabled pr default..
-
Well comodo (also seen Avast do it) can block stuff for the installer but it sounds like you also tested without it running.
So I guess its not the normal block case. ( then later files are missing)
I could only find the plugin error mentioned here
https://bugreports.qt.io/browse/QTCREATORBUG-10049And i checked my installation.
Its not even enabled pr default..@mrjj Alright, I have deactivated Comodo, I also unblocked some uuuuh, some qt files that Comodo had blocked, I performed the installation you suggested, the installation had no issues and everything went well, I launched the software and there were no warnigs or undesired messages, then I created an empty project (qt tutorials) with a c++ main.cpp, and of course, no success. There is the following message
01:40:32: Running steps for project Empty_qmakeProject001...
01:40:32: Could not create directory "D:\V A R I O U S\qt projects\Error in " Util.asciify("build-Empty_qmakeProject001-Desktop_Qt_5_8_0_MinGW_32bit-Debug")": TypeError: Property 'asciify' of object Core::Internal::UtilsJsExtension(0x6bacd80) is not a function"
Error while building/deploying project Empty_qmakeProject001 (kit: Desktop Qt 5.8.0 MinGW 32bit)
When executing step "qmake"
01:40:32: Elapsed time: 00:00. -
And just to be very sure that D:\V A R I O U S\ is not an issue you
tried with a path that has no spaces ?
The " Could not create directory " sounds like it so
please try without spaces. -
17:32:11: Running steps for project untitled...
17:32:11: Could not create directory "C:\Users\George_38\Documents\Error in " Util.asciify("build-untitled-Desktop_Qt_5_8_0_MinGW_32bit-Debug")": TypeError: Property 'asciify' of object Core::Internal::UtilsJsExtension(0x7401f88) is not a function"
Error while building/deploying project untitled (kit: Desktop Qt 5.8.0 MinGW 32bit)
When executing step "qmake"
17:32:12: Elapsed time: 00:00.No, it persistently denies. My pc is an ASUS KL-something, 2 core@2.4GHz, RAM 12gb@1600MHz and carries 940M video card. Except the video card which is not quite satisfying ( I actually never play games), all other stuff is great. It runs VS really fine and the online pc tests had been really good. A machine above the average $650 computers.
Anyway, do not bother any further. Thank you for being responsive and helpful so far. Thanx!
-
Hmm seems to end in same error " is not a function"
I assume that C:\Users\George_38\Documents\ is writable for the login user ?
Its your user profile?. Same as the login one.
Except a few chinese sites , google didn't find anything by your post of error "Util.asciify("build-untitled-Desktop.."
Very odd :)I did find
https://bugreports.qt.io/browse/QTBUG-59509
where is says
"Please go to Preferences > Build & Run > General and click "reset" behind "Default build directory". Looks like this is an incompatibility when using Qt Creator 4.3 without having used Qt Creator 4.2 before, and then going to Qt Creator 4.2 instead."
But I guess it dont apply to your case. -
Is there any possibility for any kind of log write, or any register that does not clean when pc shuts down, or any kind of data to have remained somewhere (for instance, some cache) even though formatting a disk or shutting pc down?? What if I remove the battery of the laptop (which is a really hard job to do)????
-
Is there any possibility for any kind of log write, or any register that does not clean when pc shuts down, or any kind of data to have remained somewhere (for instance, some cache) even though formatting a disk or shutting pc down?? What if I remove the battery of the laptop (which is a really hard job to do)????
Is there any possibility for any kind of log write, or any register that does not clean when pc shuts down, or any kind of data to have remained somewhere (for instance, some cache) even though formatting a disk or shutting pc down?? What if I remove the battery of the laptop (which is a really hard job to do)????
What do you mean? What log do you need and for what?
A log cannot survive formatting the partition where it is stored - how could it? -
Is there any possibility for any kind of log write, or any register that does not clean when pc shuts down, or any kind of data to have remained somewhere (for instance, some cache) even though formatting a disk or shutting pc down?? What if I remove the battery of the laptop (which is a really hard job to do)????
@GeorgeV
If you mean any traces of Qt, then no.
Creator keeps some stuff in appdata but formatting the drive will remove that. -
Hmm seems to end in same error " is not a function"
I assume that C:\Users\George_38\Documents\ is writable for the login user ?
Its your user profile?. Same as the login one.
Except a few chinese sites , google didn't find anything by your post of error "Util.asciify("build-untitled-Desktop.."
Very odd :)I did find
https://bugreports.qt.io/browse/QTBUG-59509
where is says
"Please go to Preferences > Build & Run > General and click "reset" behind "Default build directory". Looks like this is an incompatibility when using Qt Creator 4.3 without having used Qt Creator 4.2 before, and then going to Qt Creator 4.2 instead."
But I guess it dont apply to your case.@mrjj Ok, this step seem to have worked. I installed UWP 64bit and the stand-alone version <msvc2017 64-bit (I think that this is 5.8 version)> did work again. I cannot tell if it is indeed working correctly. This is something to see in the mid-term. Thanx!
