Memory leak using QThread issue

[Cobra91151]

@SGaist

I have all WMI data in QTreeWidgetItems (QTreeWidget). I have two columns:
1 - Property
2 - Data

Property and data I get from a worker class which connected with signals and slots to thread. So to change property to another language I call clear function on QTreeWidget to delete all property and data, then I call function which connects worker to thread and get this data as QTreeWidgetItems in chosen (translated) language.

[SGaist]

Are you loading any language file in order to provide translations ?

[Cobra91151]

@SGaist

Yes, but when QComboBox index changes I call this function to load appropriate translation file:

Some code:

appTranslator = new QTranslator(this);
qApp->removeTranslator(appTranslator);
appTranslator->load(":Localization/Test_ru.qm");
 qApp->installTranslator(appTranslator);

and when apply button is clicked I retranslate string and reload WMI data using my loadTraslatedText function

[SGaist]

Your code has one tiny problem: you are removing the translator you just created and then you add it again after loading the translation file, so basically you never remove anything and just keep adding new ones.

[Cobra91151]

@SGaist

I have changed code:

appTranslator = new QTranslator(this);
appTranslator->load(":Localization/Test_ru.qm");
 qApp->installTranslator(appTranslator);

But the leak is still exists.

[SGaist]

Isn't it the same code as before ?

[Cobra91151]

@SGaist

Check again. I have copied the wrong one.

I don't think that the problem is with language change function itself, because when I have commented the getWMIData function no leak is found.

So the problem is with actual getWMIData which contains other functions such as osData, cpuData.... which lead to worker class which has about 10 thousand lines of code.

I think the only way to fix this, is to figure out how to change all properties to appropriate language without reloading their data.

[SGaist]

You are still still adding one new translator each time you change the language, start by fixing that. Remove the one currently installed and then load the new one.

[Cobra91151]

@SGaist

So I put initialization of translator (appTranslator = new QTranslator(this);) in the constructor.

appTranslator->load(":Localization/Test_ru.qm");
qApp->installTranslator(appTranslator);

Then I have added qApp->removeTranslator(appTranslator); at the end to loadTraslatedText function, but now my other windows are not translated (when I open them). The problem is with qApp->removeTranslator(appTranslator); So where to remove the one currently installed?

[ambershark]

@ambershark said in Memory leak using QThread issue:

@Cobra91151 This isn't Qt code.. You should probably post this question on a win32 API message board.

Also are you sure it's actually leaking? Just because the size of memory for your running application grows does not mean it's leaking. You need something like valgrind to test for leaks on exit.

Yea checking active running memory does not show you leaks. If it changes in task manager that is ok, if when you exit the app there are still pointers to memory that didn't get cleaned up then those are leaks.

If as you watch your program run and be used it is constantly growing while running in the task manager that can be a leak too, but not just because you did something like allocate a new language.

The way memory usually works is block are allocated and freed as they are needed. So if you allocate a new block, even though you delete your old one, the OS doesn't necessarily reclaim that memory unless it is needed. So in task manager you would see it change unless you were out of memory then you would see it reclaimed.

So unless you see it constantly growing and growing, out of control, while running it's probably not leaking. That is why you need a tool like valgrind to detect actual leaks.

[SGaist]

1. Remove the currently loaded translator
2. Delete it
3. Create the new translator
4. Install it

[Cobra91151]

@ambershark

Thanks, but the problem is with WMI. And I'm working to fix it.

[Cobra91151]

@SGaist

OK. I will try it and reply.

[Cobra91151]

Thank you. I have fixed the WMI memory leak issue by releasing resources.

Code:

            VariantClear(&serviceName);
            VariantClear(&servicePath);
            VariantClear(&serviceID);
            VariantClear(&serviceType);
            VariantClear(&serviceState);
            VariantClear(&serviceStatus);
            VariantClear(&serviceErrorControl);
            VariantClear(&serviceStartMode);
            VariantClear(&serviceWaitHint);
            VariantClear(&serviceExitCode);
            pclsObj->Release();
        }
    }

    // Cleanup
    pService->Release();
    pLocator->Release();
    pEnumerator->Release();
    CoUninitialize();
    emit finished();
    return 0;   // Program successfully completed.
}

[Cobra91151]

@SGaist

I have change appTranslator to stacked object, because I can't find the appropriate place to delete it. So now my function where I load local. files looks like this:

Code:

void Test::changeLanguage(int languageIndex)
{
    languageChanged = true;
    QString systemLocale = QLocale::system().name();

    switch (languageIndex) {
        case 0:
            if (systemLocale == "en_US") {
                qApp->removeTranslator(&appTranslator);
                appTranslator.load(":Localization/Test_en.qm");
                qApp->installTranslator(&appTranslator);
            }

            if (systemLocale == "ru_RU") {
                qApp->removeTranslator(&appTranslator);
                appTranslator.load(":Localization/Test_ru.qm");
                qApp->installTranslator(&appTranslator);
            }

            if (systemLocale == "uk_UA") {
                qApp->removeTranslator(&appTranslator);
                appTranslator.load(":Localization/Test_uk.qm");
                qApp->installTranslator(&appTranslator);
            }
        break;

        case 1:
            qApp->removeTranslator(&appTranslator);
            appTranslator.load(":Localization/Test_en.qm");
            qApp->installTranslator(&appTranslator);
        break;

        case 2:
            qApp->removeTranslator(&appTranslator);
            appTranslator.load(":Localization/Test_ru.qm");
            qApp->installTranslator(&appTranslator);
        break;

        case 3:
            qApp->removeTranslator(&appTranslator);
            appTranslator.load(":Localization/Test_uk.qm");
            qApp->installTranslator(&appTranslator);
        break;

        default:
            QMessageBox::critical(this, QObject::tr("Error"), QObject::tr("Can't change localization!"), QMessageBox::Ok);
    }
}

I think this should work now?

[jsulm]

@Cobra91151 It should work depending on where appTranslator is declared.
Back to what @SGaist suggested:

qApp->removeTranslator(appTranslator); // Remove old translator
delete appTranslator; // Delete old translator
appTranslator = new QTranslator(this);
appTranslator->load(":Localization/Test_ru.qm");
 qApp->installTranslator(appTranslator);

That's it.
Documentation actually says that removing translator does not delete it, see http://doc.qt.io/qt-5/qcoreapplication.html#removeTranslator
In your code you actually was removing the new translator instead of the old one:

appTranslator = new QTranslator(this); // You create new one
qApp->removeTranslator(appTranslator); // You try to remove the new one
appTranslator->load(":Localization/Test_ru.qm");
 qApp->installTranslator(appTranslator);

[Cobra91151]

@jsulm

Thanks for code example. I have declared it in a header file as stacked object.

[Cobra91151]

Issue is solved. Thanks all for the help.