namespace doubts in program

jsulm

Yes, this is how Qt handles auto-generated code (moc)
No. A pointer cannot point to a class, it points to an instance of a class (to an instance of Ui::DemoApp in this case)
Don't do that! setupUi() and retranslateUi() is auto-generated code and will change every-time you change your UI! There is just no need to move it to demoApp.cpp

o6a6r9v1p

jsulm, Thank you.
2) it is instance of Ui::DemoApp , pointed by ui.
3) Can I add/modify the code in setupUi() function. How can I add some Widgets to it manually.

mrjj

@o6a6r9v1p said in namespace doubts in program:

Can I add/modify the code in setupUi() function. How can I add some Widgets to it manually.

after setupUI() is being called, you can add new widgets to the existing
layout etc.
All is accessible via the ui->widgetname so that's how u can get access to place holder/layouts etc.
So you just do it after the automatic part.

o6a6r9v1p

mrjj,
shall i do it inside setupui() function or
after setup() is called in DemoApp constructor in demoapp.cpp file?

mrjj

@o6a6r9v1p
Always AFTER!
The setupui() is generated. Do not change that file. it will be overwritten suddenly.
All ui_xxxx files are not to be edited. :)

And it dont have to be in the constructor . Can be any time after.

o6a6r9v1p

mrjj,
Thank you for the advice. I will do accordingly and would comeback with result.

o6a6r9v1p

mrjj,
"And it dont have to be in the constructor . Can be any time after."
Where can I put the additional code, out side Constructor? any Clue!

mrjj

@o6a6r9v1p

Well i just have a function in mainwindow. I call from constructor.
But what i mean is , you can also have
a button that then add new widgets to the interface.
And so on.
So use a function as not to make constructor big or directly on button / where u need it.

o6a6r9v1p

@mrjj
I did as you told.

The DemoApp Constructor is:
@
DemoApp::DemoApp(QWidget *parent) :
QMainWindow(parent),
ui(new Ui::DemoApp)
{
ui->setupUi(this);

modifyGui(this); //this function is added now


connect(this, SIGNAL(----), ----, SLOT(-----));
connect(-----, SIGNAL(----)), this, SLOT(----));

}
@

@
void modifyGui(QMainWindow *DemoApp)
{

--

}
@
is defined in main.cpp

I am getting the error : "modifyGui" was not declared in this scope
where shall I put this function?

jsulm

@o6a6r9v1p Why is modifyGui in main.cpp?
It must be a method in DemoApp as it is handling its content. Add modifyGui declaration to DemoApp class in demoapp.h and the definition to demoapp.cpp:

void DemoApp::modifyGui()
{
...
}

Also you do not need to pass any pointer to modifyGui if it is member of DemoApp.

o6a6r9v1p

@jsulm
Did as you told. It is now compiling.

when I added widgets, they are not visible in GUI. do i modify any property ( I used Label, linedit widgets)
How to use other classes, for example, code from others etc. in my code. What precautions are to be taken

mrjj

@o6a6r9v1p

Hi after you create a new Widget (with parent)
you might need to call show.

Or it just a bug and you give it to wrong parent and its covered under something.

So please show code on how you create and insert the new widgets.

o6a6r9v1p

@mrjj
Code for ModifyGui() is
@
void DemoApp::modifyGui()
{

QLabel *label_Status1 = new QLabel(tr("Status1"));
label_Status1->setObjectName(QString::fromUtf8("Status1"));
label_Status1->setEnabled(true);
label_Status1->setGeometry(QRect(410, 10, 41, 21));
label_Status1->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
QLineEdit *deviceStatus1 = new QLineEdit();
deviceStatus1->setObjectName(QString::fromUtf8("deviceStatus1"));
deviceStatus1->setEnabled(true);
deviceStatus1->setGeometry(QRect(20, 10, 391, 20));
deviceStatus1->setReadOnly(true);

QHBoxLayout *statusLayout = new QHBoxLayout;
statusLayout->addWidget(deviceStatus1);
statusLayout->addWidget(label_Status1);

QVBoxLayout *mainLayout = new QVBoxLayout;

// mainLayout->addLayout(statusLayout);
setLayout(mainLayout);

setWindowTitle(tr(" Device Monitor"));

}

@

when i uncomment the commented line, I am getting error
"no matching function ".
little confused with call sequence or format in Qt.

mrjj

It seems you try to add layout to layout ?

Make sure its the right type
http://doc.qt.io/qt-5/qgridlayout.html#addLayout
or
http://doc.qt.io/qt-5/qboxlayout.html#addLayout
or ?
and to include the other parameters depending of the type of mainLayout

Alternatively , use a place holder widget
Apply statusLayout to this widget and
mainLayout->addWidget(place_holder);

o6a6r9v1p

Hi mrjj,
This is the code for setupGui() & retranslate Gui()

@
void setupUi(QMainWindow *DemoApp)
{
if (DemoApp->objectName().isEmpty())
DemoApp->setObjectName(QString::fromUtf8("DemoApp"));
DemoApp->resize(600, 400);
centralWidget = new QWidget(DemoApp);
centralWidget->setObjectName(QString::fromUtf8("centralWidget"));
progressBar = new QProgressBar(centralWidget);
progressBar->setObjectName(QString::fromUtf8("progressBar"));
progressBar->setEnabled(false);
progressBar->setGeometry(QRect(20, 100, 421, 21));
progressBar->setMaximum(1024);
progressBar->setValue(0);
progressBar->setTextVisible(false);
pushButton = new QPushButton(centralWidget);
pushButton->setObjectName(QString::fromUtf8("pushButton"));
pushButton->setEnabled(false);
pushButton->setGeometry(QRect(20, 50, 91, 21));
pushbuttonStatus = new QLabel(centralWidget);
pushbuttonStatus->setObjectName(QString::fromUtf8("pushbuttonStatus"));
pushbuttonStatus->setEnabled(false);
pushbuttonStatus->setGeometry(QRect(200, 50, 231, 20));
pushbuttonStatus->setCursor(QCursor(Qt::ArrowCursor));
pushbuttonStatus->setInputMethodHints(Qt::ImhNone);
pushbuttonStatus->setFrameShadow(QFrame::Plain);
pushbuttonStatus->setAlignment(Qt::AlignLeading|Qt::AlignLeft|Qt::AlignVCenter);
label_2 = new QLabel(centralWidget);
label_2->setObjectName(QString::fromUtf8("label_2"));
label_2->setEnabled(false);
label_2->setGeometry(QRect(30, 80, 401, 20));
label_2->setAlignment(Qt::AlignCenter);
label_3 = new QLabel(centralWidget);
label_3->setObjectName(QString::fromUtf8("label_3"));
label_3->setEnabled(true);
label_3->setGeometry(QRect(410, 10, 41, 21));
label_3->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
deviceStatus = new QLineEdit(centralWidget);
deviceStatus->setObjectName(QString::fromUtf8("deviceStatus"));
deviceStatus->setEnabled(true);
deviceStatus->setGeometry(QRect(20, 10, 391, 20));
deviceStatus->setReadOnly(true);

    DemoApp->setCentralWidget(centralWidget);
    menuBar = new QMenuBar(DemoApp);
    menuBar->setObjectName(QString::fromUtf8("menuBar"));
    menuBar->setGeometry(QRect(0, 0, 461, 23));
    DemoApp->setMenuBar(menuBar);
    statusBar = new QStatusBar(DemoApp);
    statusBar->setObjectName(QString::fromUtf8("statusBar"));
    DemoApp->setStatusBar(statusBar);

    retranslateUi(DemoApp);

    QMetaObject::connectSlotsByName(DemoApp);
} // setupUi

@

@ void retranslateUi(QMainWindow *DemoApp)
{
DemoApp->setWindowTitle(QApplication::translate("DemoApp", "DemoApp", 0));
pushButton->setText(QApplication::translate("DemoApp", "ToggleLED(s)", 0));
pushbuttonStatus->setText(QApplication::translate("DemoApp", "Pushbutton State: Pressed", 0));
label_2->setText(QApplication::translate("DemoApp", "Not Pressed", 0));
label_3->setText(QApplication::translate("DemoApp", "Status", 0));
deviceStatus->setText(QApplication::translate("DemoApp", "Device Not Detected: Verify Connection/Correct Firmware", 0));
} // retranslateUi
@

o6a6r9v1p

Sorry Typing mistake. They are setupUi() and retranslateUi().

It means we have to add widgets to centralwindow.
thank you.

o6a6r9v1p

modifyGui() is changed as told by you.

@void DemoApp::modifyGui()
{

QLabel *label_Status1 = new QLabel(tr("Status1"));
label_Status1->setObjectName(QString::fromUtf8("Status1"));
label_Status1->setEnabled(true);
label_Status1->setGeometry(QRect(410, 10, 41, 21));
label_Status1->setAlignment(Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter);
QLineEdit *deviceStatus1 = new QLineEdit();
deviceStatus1->setObjectName(QString::fromUtf8("deviceStatus1"));
deviceStatus1->setEnabled(true);
deviceStatus1->setGeometry(QRect(20, 10, 391, 20));
deviceStatus1->setReadOnly(true);

QHBoxLayout *statusLayout = new QHBoxLayout;
statusLayout->addWidget(deviceStatus1);
statusLayout->addWidget(label_Status1);

QWidget *window = new QWidget();
window->setLayout(statusLayout);
setCentralWidget(window);

}
@

It is showing GUI, but it stops working,
it gives the message "The program has unexpectedly finished."
what may be the problem?

mrjj

@o6a6r9v1p said in namespace doubts in program:

"The program has unexpectedly finished."

It means it crash.
Fastest way is to set some breakpoints and
single step between them to try find the line that makes crash.

Nothing springs to eye for crashing in that code.

o6a6r9v1p

@mrjj
Thanks to all for pointing in right direction.

namespace doubts in program

@app.h

@app.cpp

namespace Ui { class DemoApp }
class DemoApp:public QMainWindow
{
explicit DemoApp(QWidget *parent=0);
~DemoApp();

private:
Ui::DemoApp *ui;

DemoApp::DemoApp(QWidget *parent=0) :QMainWindow(parent, ui(new Ui::DemoApp)
{ui->setupUi(this);

}
DemoApp::~DemoApp()
{

int main ()
{

--

--

namespace doubts in program

@app.h

@app.cpp

namespace Ui { class DemoApp } class DemoApp:public QMainWindow { explicit DemoApp(QWidget *parent=0); ~DemoApp();

private: Ui::DemoApp *ui;

DemoApp::DemoApp(QWidget *parent=0) :QMainWindow(parent, ui(new Ui::DemoApp) {ui->setupUi(this);

} DemoApp::~DemoApp() {

int main () {

--

--

namespace Ui { class DemoApp }
class DemoApp:public QMainWindow
{
explicit DemoApp(QWidget *parent=0);
~DemoApp();

private:
Ui::DemoApp *ui;

DemoApp::DemoApp(QWidget *parent=0) :QMainWindow(parent, ui(new Ui::DemoApp)
{ui->setupUi(this);

}
DemoApp::~DemoApp()
{

int main ()
{