I built Qt Everywhere for beaglebone black (OS Debian) but fail, somebody used to built it success can help me?
-
@jsulm, the Firts thank you for reply me! it's my honor! about your disposal, i understand like: i need a connect SD card contain a BBB-eMMC-flasher-debian-8.2-lxqt-2gb-armhf-2015-11-29-2gb.img ( curentl version my beagle use, in picture
) and mount it( /media/ngocvu/rootfs) , after i configure QT below:./configure -v -opensource -confirm-license -prefix /usr/local/qt-5.7 -no-largefile -no-accessibility -sysroot /media/ngocvu/rootfs -opengl es2 -eglfs -qt-zlib -no-gif -qt-libpng -qt-libjpeg -no-nis -skip qtpurchasing -skip qtcanvas3d -no-cups -xplatform linux-linaro-gnueabihf-g++ -device linux-beagleboard-g++ -device-option CROSS_COMPILE=arm-linux-gnueabihf-but it's not work, old error:
checking for OpenGL ES 2.0... arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -mfloat-abi=hard --sysroot=/media/ngocvu/rootfs -O2 -O3 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-beagleboard-g++ -o opengles2.o opengles2.cpp opengles2.cpp:43:25: fatal error: GLES2/gl2.h: No such file or directory compilation terminated. Makefile:192: recipe for target 'opengles2.o' failed make: *** [opengles2.o] Error 1 OpenGL ES 2.0 disabled. The OpenGL ES 2.0 functionality test failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL_ES2, QMAKE_LIBDIR_OPENGL_ES2 and QMAKE_LIBS_OPENGL_ES2 in /home/ngocvu/Downloads/qt-everywhere-opensource-src-5.7.0/qtbase/mkspecs/devices/linux-beagleboard-g++.i wrong step?!!
@Dang-Vu You need a sysroot with installed OpenGL ES packages. So, you should NOT use the *.img file, because it does not yet contain those packages. Instead you boot your device, log on on it and install needed packages (apt-get install libgles2-mesa-dev). Then you shut down the device, put the SDCard in your PC and try again.
-
@Dang-Vu You need a sysroot with installed OpenGL ES packages. So, you should NOT use the *.img file, because it does not yet contain those packages. Instead you boot your device, log on on it and install needed packages (apt-get install libgles2-mesa-dev). Then you shut down the device, put the SDCard in your PC and try again.
@jsulm said in i built qt-everywhere for beaglebone black( OS Debian) but fail, somebody used to built it success can help me?:
You need a sysroot with installed OpenGL ES packages. So, you should NOT use the *.img file, because it does not yet contain those packages. Instead you boot your device, log on on it and install needed packages (apt-get install libgles2-mesa-dev). Then you shut down the device, put the SDCard in your PC and try again.
i think it possible Sir? because my beaglebone can install debian from SD card into Flash memory of beaglebone, after it can work without SD card! but i will try again! P/s: my SD card contain a file extracted( i use Disk Image to write data from debian.img to Sd card) ! i usually use it't for install OS for Beaglebone!
-
@jsulm said in i built qt-everywhere for beaglebone black( OS Debian) but fail, somebody used to built it success can help me?:
You need a sysroot with installed OpenGL ES packages. So, you should NOT use the *.img file, because it does not yet contain those packages. Instead you boot your device, log on on it and install needed packages (apt-get install libgles2-mesa-dev). Then you shut down the device, put the SDCard in your PC and try again.
i think it possible Sir? because my beaglebone can install debian from SD card into Flash memory of beaglebone, after it can work without SD card! but i will try again! P/s: my SD card contain a file extracted( i use Disk Image to write data from debian.img to Sd card) ! i usually use it't for install OS for Beaglebone!
@Dang-Vu Such image files usually do not contain everything. I'm quite sure the image file does not contain OpenGL ES header files.
An easier solution is to mount the root file system of your target device on your PC via NFS, see https://wiki.ubuntuusers.de/NFS/
Ubuntu and Debian are very similar, so you can do it as described there. -
@Dang-Vu Such image files usually do not contain everything. I'm quite sure the image file does not contain OpenGL ES header files.
An easier solution is to mount the root file system of your target device on your PC via NFS, see https://wiki.ubuntuusers.de/NFS/
Ubuntu and Debian are very similar, so you can do it as described there.@jsulm Dear Sir, i try but i have a problem with -sysroot! when i have a path -sysroot /media/ngocvu/rootfs ( i compress a rootfs in https://docs.google.com/uc?id=0BxlMhouhD6_YSmFlaExyVHJUTlU&export=download , full opengl, gcc,g++, linaro toolchains you can download and see it)
checking for C++11... arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -mfloat-abi=hard --sysroot=/usr/bin/ -O2 -O3 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-beagleboard-g++ -o c++11.o c++11.cpp c++11.cpp:46:19: fatal error: utility: No such file or directory #include <utility> ^ compilation terminated. make: *** [c++11.o] Error 1 C++11 disabled. ERROR: Qt requires a C++11 compiler and yours does not seem to be that. Please upgrade.if don't have -sysroot /media/ngocvu/rootfs , configure will good work!
i don't understand that error! i was installed g++ version g++ (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4 -
@jsulm Dear Sir, i try but i have a problem with -sysroot! when i have a path -sysroot /media/ngocvu/rootfs ( i compress a rootfs in https://docs.google.com/uc?id=0BxlMhouhD6_YSmFlaExyVHJUTlU&export=download , full opengl, gcc,g++, linaro toolchains you can download and see it)
checking for C++11... arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -mfloat-abi=hard --sysroot=/usr/bin/ -O2 -O3 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-beagleboard-g++ -o c++11.o c++11.cpp c++11.cpp:46:19: fatal error: utility: No such file or directory #include <utility> ^ compilation terminated. make: *** [c++11.o] Error 1 C++11 disabled. ERROR: Qt requires a C++11 compiler and yours does not seem to be that. Please upgrade.if don't have -sysroot /media/ngocvu/rootfs , configure will good work!
i don't understand that error! i was installed g++ version g++ (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4This post is deleted! -
@jsulm Dear Sir, i try but i have a problem with -sysroot! when i have a path -sysroot /media/ngocvu/rootfs ( i compress a rootfs in https://docs.google.com/uc?id=0BxlMhouhD6_YSmFlaExyVHJUTlU&export=download , full opengl, gcc,g++, linaro toolchains you can download and see it)
checking for C++11... arm-linux-gnueabihf-g++ -c -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mthumb -mfloat-abi=hard --sysroot=/usr/bin/ -O2 -O3 -std=gnu++11 -Wall -W -fPIC -I. -I../../../mkspecs/devices/linux-beagleboard-g++ -o c++11.o c++11.cpp c++11.cpp:46:19: fatal error: utility: No such file or directory #include <utility> ^ compilation terminated. make: *** [c++11.o] Error 1 C++11 disabled. ERROR: Qt requires a C++11 compiler and yours does not seem to be that. Please upgrade.if don't have -sysroot /media/ngocvu/rootfs , configure will good work!
i don't understand that error! i was installed g++ version g++ (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4 -
@Dang-Vu Can you please post the output of
arm-linux-gnueabihf-g++ --version?
How did you call configure?
What is inside /media/ngocvu/rootfs ?@jsulm ouput g++ version:
arm-linux-gnueabihf-g++ (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) 4.8.4 Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.my configure
./configure -v -opensource -confirm-license -prefix /usr/local/qt-5.7 -no-largefile -no-accessibility -sysroot /media/ngocvu/rootfs -opengl es2 -eglfs -qt-zlib -no-gif -qt-libpng -qt-libjpeg -no-nis -skip qtpurchasing -skip qtcanvas3d -no-cups -xplatform linux-linaro-gnueabihf-g++ -device linux-beagleboard-g++ -device-option CROSS_COMPILE=arm-linux-gnueabihf-in inside the /media/ngocvu/rootfs is debian image, ecxactly is a "/" of OS debian run in SD card! without SD card it cannot run!) and i upload it folder to google drive! it's link https://docs.google.com/uc?id=0BxlMhouhD6_YSmFlaExyVHJUTlU&export=download
-
@jsulm ouput g++ version:
arm-linux-gnueabihf-g++ (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) 4.8.4 Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.my configure
./configure -v -opensource -confirm-license -prefix /usr/local/qt-5.7 -no-largefile -no-accessibility -sysroot /media/ngocvu/rootfs -opengl es2 -eglfs -qt-zlib -no-gif -qt-libpng -qt-libjpeg -no-nis -skip qtpurchasing -skip qtcanvas3d -no-cups -xplatform linux-linaro-gnueabihf-g++ -device linux-beagleboard-g++ -device-option CROSS_COMPILE=arm-linux-gnueabihf-in inside the /media/ngocvu/rootfs is debian image, ecxactly is a "/" of OS debian run in SD card! without SD card it cannot run!) and i upload it folder to google drive! it's link https://docs.google.com/uc?id=0BxlMhouhD6_YSmFlaExyVHJUTlU&export=download
-
@Dang-Vu Can you execute
find /media/ngocvu/rootfs -name utilityand post the output?
You probably did not install needed dev packages on your target, so header files like "utility" are missing. -
@jsulm my output find /media/ngocvu/rootfs -name utility, Sir!
./opt/source/Userspace-Arduino/utility ./usr/include/c++/4.9/tr1/utility ./usr/include/c++/4.9/utility@Dang-Vu That line is wrong:
--sysroot=/usr/binit tells the compiler to look in /usr/bin/include for header files which is wrong.
I don't know why this parameter is passed to the compiler. Maybe it comes from your previous attempts to cross-compile?
Do you call configure script from the directory where Qt source code is located?
If so then please extract Qt sources again and call configure from another directory to do a clean "out of source build". -
@Dang-Vu That line is wrong:
--sysroot=/usr/binit tells the compiler to look in /usr/bin/include for header files which is wrong.
I don't know why this parameter is passed to the compiler. Maybe it comes from your previous attempts to cross-compile?
Do you call configure script from the directory where Qt source code is located?
If so then please extract Qt sources again and call configure from another directory to do a clean "out of source build". -
@Dang-Vu That line is wrong:
--sysroot=/usr/binit tells the compiler to look in /usr/bin/include for header files which is wrong.
I don't know why this parameter is passed to the compiler. Maybe it comes from your previous attempts to cross-compile?
Do you call configure script from the directory where Qt source code is located?
If so then please extract Qt sources again and call configure from another directory to do a clean "out of source build".@jsulm i passed a -sysroot a successed! i was basic a tutorial in the link https://wiki.qt.io/BeagleBone_Black_Beginners_Guide
but i have a trouble with eglfs, when i run the program in beaglebone black, i have a anoucement : "can not start because can't find or lost plugin eglfs(or some think else)". My configure below:./configure -device linux-beagleboard-g++ -device-option CROSS_COMPILE=~/opt/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /mnt/bbb-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5bbb -hostprefix /usr/local/qt5bbb -no-xcb -qt-zlib -no-opengl -qt-libpng -nomake examples -nomake tests -no-xkbi deficient -opengl es2 while configure!?
P/s: in /mnt/bbb-rootfs i have /mnt/bbb-rootfs/usr/lib/arm-linux-gnueabihf/libGLESv2.so.it's mean i was installed everything about opengl, mesa, v..v. Also in
/home/ngocvu/qt5/qtbase/mkspecs/devices/linux-beagleboard-g++/qmake.confi update 2 lines
QMAKE_INCDIR_EGL = /mnt/bbb-rootfs/usr/include/ QMAKE_LIBDIR_EGL = /mnt/bbb-rootfs/usr/lib/arm-linux-gnueabihf/but it's not work,.... old error:
ERROR: The OpenGL functionality tests failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2], QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform. -
@jsulm i passed a -sysroot a successed! i was basic a tutorial in the link https://wiki.qt.io/BeagleBone_Black_Beginners_Guide
but i have a trouble with eglfs, when i run the program in beaglebone black, i have a anoucement : "can not start because can't find or lost plugin eglfs(or some think else)". My configure below:./configure -device linux-beagleboard-g++ -device-option CROSS_COMPILE=~/opt/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /mnt/bbb-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5bbb -hostprefix /usr/local/qt5bbb -no-xcb -qt-zlib -no-opengl -qt-libpng -nomake examples -nomake tests -no-xkbi deficient -opengl es2 while configure!?
P/s: in /mnt/bbb-rootfs i have /mnt/bbb-rootfs/usr/lib/arm-linux-gnueabihf/libGLESv2.so.it's mean i was installed everything about opengl, mesa, v..v. Also in
/home/ngocvu/qt5/qtbase/mkspecs/devices/linux-beagleboard-g++/qmake.confi update 2 lines
QMAKE_INCDIR_EGL = /mnt/bbb-rootfs/usr/include/ QMAKE_LIBDIR_EGL = /mnt/bbb-rootfs/usr/lib/arm-linux-gnueabihf/but it's not work,.... old error:
ERROR: The OpenGL functionality tests failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2], QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform. -
@Dang-Vu Probably the OpenGL header files are not available in your sysroot.
Please post what was printed before this line:ERROR: The OpenGL functionality tests failed!It should tell you what exactly is missing.
@jsulm it all anoucement, Sir!
Building on: x86_64 Building for: arm Configuration: cross_compile compile_examples enable_new_dtags largefile neon precompile_header shared rpath release c++11 c++14 concurrent dbus mremap no-qml-debug reduce_exports release_tools stl Build options: Mode ................................... release; optimized tools Building shared libraries .............. yes Using C++ standard ..................... C++14 Using gold linker ...................... no Using new DTAGS ........................ yes Using precompiled headers .............. yes Using LTCG ............................. no Target compiler supports: NEON ................................. yes Build parts ............................ libs Qt modules and options: Qt Concurrent .......................... yes Qt D-Bus ............................... yes Qt D-Bus directly linked to libdbus .... yes Qt Gui ................................. yes Qt Widgets ............................. yes Support enabled for: Accessibility .......................... no Using pkg-config ....................... yes QML debugging .......................... no udev ................................... no Using system zlib ...................... no Qt Core: DoubleConversion ....................... yes Using system DoubleConversion ........ no GLib ................................... no iconv .................................. yes ICU .................................... no Logging backends: journald ............................. no syslog ............................... no Using system PCRE ...................... no Qt Network: getaddrinfo() .......................... yes getifaddrs() ........................... yes IPv6 ifname ............................ yes libproxy ............................... no OpenSSL ................................ yes Qt directly linked to OpenSSL ........ no SCTP ................................... no Use system proxies ..................... yes Qt Sql: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt Gui: FreeType ............................... yes Using system FreeType ................ no HarfBuzz ............................... yes Using system HarfBuzz ................ no Fontconfig ............................. no Image formats: GIF .................................. yes ICO .................................. yes JPEG ................................. yes Using system libjpeg ............... no PNG .................................. yes Using system libpng ................ no OpenGL: EGL .................................. no Desktop OpenGL ....................... no OpenGL ES 2.0 ........................ no OpenGL ES 3.0 ........................ no OpenGL ES 3.1 ........................ no Session Management ..................... yes Features used by QPA backends: evdev .................................. yes libinput ............................... no mtdev .................................. no tslib .................................. no xkbcommon-evdev ........................ no QPA backends: DirectFB ............................... no EGLFS .................................. no LinuxFB ................................ yes Mir client ............................. no Qt Widgets: GTK+ ................................... no Styles ................................. Fusion Windows Qt PrintSupport: CUPS ................................... no Qt SerialBus: Socket CAN ............................. yes Socket CAN FD .......................... yes QtXmlPatterns: XML schema support ..................... yes Qt QML: QML interpreter ........................ yes QML network support .................... yes Qt Quick: Direct3D 12 ............................ no AnimatedImage item ..................... yes Canvas item ............................ yes Support for Quick Designer ............. yes Flipable item .......................... yes GridView item .......................... yes ListView item .......................... yes Path support ........................... yes PathView item .......................... yes Positioner items ....................... yes ShaderEffect item ...................... yes Sprite item ............................ yes Qt Gamepad: SDL2 ................................... no Qt 3D: System Assimp .......................... no Qt Wayland Client ........................ no Qt Wayland Compositor .................... no Qt Bluetooth: BlueZ .................................. no BlueZ Low Energy ....................... no Linux Crypto API ....................... no Qt Sensors: sensorfw ............................... no Qt Multimedia: ALSA ................................... yes GStreamer 1.0 .......................... no GStreamer 0.10 ......................... no Video for Linux ........................ yes OpenAL ................................. no PulseAudio ............................. no Resource Policy (libresourceqt5) ....... no DirectShow ............................. no Qt Location: Gypsy GPS Daemon ....................... no WinRT Geolocation API .................. no Qt WebEngine: Proprietary Codecs ..................... no Spellchecker ........................... yes Note: -optimized-tools is not useful in -release mode. WARNING: Accessibility disabled. This configuration of Qt is unsupported. ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed. ERROR: The OpenGL functionality tests failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2], QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform. -
@jsulm it all anoucement, Sir!
Building on: x86_64 Building for: arm Configuration: cross_compile compile_examples enable_new_dtags largefile neon precompile_header shared rpath release c++11 c++14 concurrent dbus mremap no-qml-debug reduce_exports release_tools stl Build options: Mode ................................... release; optimized tools Building shared libraries .............. yes Using C++ standard ..................... C++14 Using gold linker ...................... no Using new DTAGS ........................ yes Using precompiled headers .............. yes Using LTCG ............................. no Target compiler supports: NEON ................................. yes Build parts ............................ libs Qt modules and options: Qt Concurrent .......................... yes Qt D-Bus ............................... yes Qt D-Bus directly linked to libdbus .... yes Qt Gui ................................. yes Qt Widgets ............................. yes Support enabled for: Accessibility .......................... no Using pkg-config ....................... yes QML debugging .......................... no udev ................................... no Using system zlib ...................... no Qt Core: DoubleConversion ....................... yes Using system DoubleConversion ........ no GLib ................................... no iconv .................................. yes ICU .................................... no Logging backends: journald ............................. no syslog ............................... no Using system PCRE ...................... no Qt Network: getaddrinfo() .......................... yes getifaddrs() ........................... yes IPv6 ifname ............................ yes libproxy ............................... no OpenSSL ................................ yes Qt directly linked to OpenSSL ........ no SCTP ................................... no Use system proxies ..................... yes Qt Sql: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt Gui: FreeType ............................... yes Using system FreeType ................ no HarfBuzz ............................... yes Using system HarfBuzz ................ no Fontconfig ............................. no Image formats: GIF .................................. yes ICO .................................. yes JPEG ................................. yes Using system libjpeg ............... no PNG .................................. yes Using system libpng ................ no OpenGL: EGL .................................. no Desktop OpenGL ....................... no OpenGL ES 2.0 ........................ no OpenGL ES 3.0 ........................ no OpenGL ES 3.1 ........................ no Session Management ..................... yes Features used by QPA backends: evdev .................................. yes libinput ............................... no mtdev .................................. no tslib .................................. no xkbcommon-evdev ........................ no QPA backends: DirectFB ............................... no EGLFS .................................. no LinuxFB ................................ yes Mir client ............................. no Qt Widgets: GTK+ ................................... no Styles ................................. Fusion Windows Qt PrintSupport: CUPS ................................... no Qt SerialBus: Socket CAN ............................. yes Socket CAN FD .......................... yes QtXmlPatterns: XML schema support ..................... yes Qt QML: QML interpreter ........................ yes QML network support .................... yes Qt Quick: Direct3D 12 ............................ no AnimatedImage item ..................... yes Canvas item ............................ yes Support for Quick Designer ............. yes Flipable item .......................... yes GridView item .......................... yes ListView item .......................... yes Path support ........................... yes PathView item .......................... yes Positioner items ....................... yes ShaderEffect item ...................... yes Sprite item ............................ yes Qt Gamepad: SDL2 ................................... no Qt 3D: System Assimp .......................... no Qt Wayland Client ........................ no Qt Wayland Compositor .................... no Qt Bluetooth: BlueZ .................................. no BlueZ Low Energy ....................... no Linux Crypto API ....................... no Qt Sensors: sensorfw ............................... no Qt Multimedia: ALSA ................................... yes GStreamer 1.0 .......................... no GStreamer 0.10 ......................... no Video for Linux ........................ yes OpenAL ................................. no PulseAudio ............................. no Resource Policy (libresourceqt5) ....... no DirectShow ............................. no Qt Location: Gypsy GPS Daemon ....................... no WinRT Geolocation API .................. no Qt WebEngine: Proprietary Codecs ..................... no Spellchecker ........................... yes Note: -optimized-tools is not useful in -release mode. WARNING: Accessibility disabled. This configuration of Qt is unsupported. ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed. ERROR: The OpenGL functionality tests failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2], QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform. -
@jsulm all in here, Sir!
Note: -optimized-tools is not useful in -release mode. WARNING: Accessibility disabled. This configuration of Qt is unsupported. ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed. ERROR: Feature 'egl' was enabled, but the pre-condition 'features.opengl && (features.angle || libs.egl)' failed. ERROR: Feature 'eglfs' was enabled, but the pre-condition 'features.egl' failed. ERROR: The OpenGL functionality tests failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2], QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform. -
@jsulm all in here, Sir!
Note: -optimized-tools is not useful in -release mode. WARNING: Accessibility disabled. This configuration of Qt is unsupported. ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed. ERROR: Feature 'egl' was enabled, but the pre-condition 'features.opengl && (features.angle || libs.egl)' failed. ERROR: Feature 'eglfs' was enabled, but the pre-condition 'features.egl' failed. ERROR: The OpenGL functionality tests failed! You might need to modify the include and library search paths by editing QMAKE_INCDIR_OPENGL[_ES2], QMAKE_LIBDIR_OPENGL[_ES2] and QMAKE_LIBS_OPENGL[_ES2] in the mkspec for your platform. -
@Dang-Vu I actually wanted to see the output generated during all the tests which are executed by configure. What you pasted is after that tests.
@jsulm i configure below:
sudo ./configure -device linux-beagleboard-g++ -device-option CROSS_COMPILE=~/opt/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /mnt/bbb-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5bbb -hostprefix /usr/local/qt5bbb -no-xcb -qt-zlib -no-opengl -qt-libpng -nomake examples -nomake tests -no-xkb -no-kms -eglfs -no-xcb -no-accessibility -opengl es2 -no-gui -no-widgets -no-egl -openssl -no-qml-debug -vall out put:
Configure summary: Building on: x86_64 Building for: arm Configuration: cross_compile compile_examples enable_new_dtags largefile neon precompile_header shared rpath release c++11 c++14 concurrent dbus no-gui mremap no-qml-debug reduce_exports release_tools stl no-widgets Build options: Mode ................................... release; optimized tools Building shared libraries .............. yes Using C++ standard ..................... C++14 Using gold linker ...................... no Using new DTAGS ........................ yes Using precompiled headers .............. yes Using LTCG ............................. no Target compiler supports: NEON ................................. yes Build parts ............................ libs Qt modules and options: Qt Concurrent .......................... yes Qt D-Bus ............................... yes Qt D-Bus directly linked to libdbus .... yes Qt Gui ................................. no Qt Widgets ............................. no Support enabled for: Accessibility .......................... no Using pkg-config ....................... yes QML debugging .......................... no udev ................................... no Using system zlib ...................... no Qt Core: DoubleConversion ....................... yes Using system DoubleConversion ........ no GLib ................................... no iconv .................................. yes ICU .................................... no Logging backends: journald ............................. no syslog ............................... no Using system PCRE ...................... no Qt Network: getaddrinfo() .......................... yes getifaddrs() ........................... yes IPv6 ifname ............................ yes libproxy ............................... no OpenSSL ................................ yes Qt directly linked to OpenSSL ........ no SCTP ................................... no Use system proxies ..................... yes Qt Sql: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt Gui: FreeType ............................... yes Using system FreeType ................ no HarfBuzz ............................... yes Using system HarfBuzz ................ no Fontconfig ............................. no Image formats: GIF .................................. yes ICO .................................. yes JPEG ................................. yes Using system libjpeg ............... no PNG .................................. yes Using system libpng ................ no OpenGL: EGL .................................. no Desktop OpenGL ....................... no OpenGL ES 2.0 ........................ no OpenGL ES 3.0 ........................ no OpenGL ES 3.1 ........................ no Session Management ..................... yes Features used by QPA backends: evdev .................................. yes libinput ............................... no mtdev .................................. no tslib .................................. no xkbcommon-evdev ........................ no QPA backends: DirectFB ............................... no EGLFS .................................. no LinuxFB ................................ yes Mir client ............................. no Qt Widgets: GTK+ ................................... no Styles ................................. Fusion Windows Qt PrintSupport: CUPS ................................... no Note: -optimized-tools is not useful in -release mode. WARNING: Accessibility disabled. This configuration of Qt is unsupported. ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed. ERROR: Feature 'eglfs' was enabled, but the pre-condition 'features.egl' failed. -
@jsulm i configure below:
sudo ./configure -device linux-beagleboard-g++ -device-option CROSS_COMPILE=~/opt/gcc-linaro-4.9-2015.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf- -sysroot /mnt/bbb-rootfs -opensource -confirm-license -optimized-qmake -reduce-exports -release -make libs -prefix /usr/local/qt5bbb -hostprefix /usr/local/qt5bbb -no-xcb -qt-zlib -no-opengl -qt-libpng -nomake examples -nomake tests -no-xkb -no-kms -eglfs -no-xcb -no-accessibility -opengl es2 -no-gui -no-widgets -no-egl -openssl -no-qml-debug -vall out put:
Configure summary: Building on: x86_64 Building for: arm Configuration: cross_compile compile_examples enable_new_dtags largefile neon precompile_header shared rpath release c++11 c++14 concurrent dbus no-gui mremap no-qml-debug reduce_exports release_tools stl no-widgets Build options: Mode ................................... release; optimized tools Building shared libraries .............. yes Using C++ standard ..................... C++14 Using gold linker ...................... no Using new DTAGS ........................ yes Using precompiled headers .............. yes Using LTCG ............................. no Target compiler supports: NEON ................................. yes Build parts ............................ libs Qt modules and options: Qt Concurrent .......................... yes Qt D-Bus ............................... yes Qt D-Bus directly linked to libdbus .... yes Qt Gui ................................. no Qt Widgets ............................. no Support enabled for: Accessibility .......................... no Using pkg-config ....................... yes QML debugging .......................... no udev ................................... no Using system zlib ...................... no Qt Core: DoubleConversion ....................... yes Using system DoubleConversion ........ no GLib ................................... no iconv .................................. yes ICU .................................... no Logging backends: journald ............................. no syslog ............................... no Using system PCRE ...................... no Qt Network: getaddrinfo() .......................... yes getifaddrs() ........................... yes IPv6 ifname ............................ yes libproxy ............................... no OpenSSL ................................ yes Qt directly linked to OpenSSL ........ no SCTP ................................... no Use system proxies ..................... yes Qt Sql: DB2 (IBM) .............................. no InterBase .............................. no MySql .................................. no OCI (Oracle) ........................... no ODBC ................................... no PostgreSQL ............................. no SQLite2 ................................ no SQLite ................................. yes Using system provided SQLite ......... no TDS (Sybase) ........................... no Qt Gui: FreeType ............................... yes Using system FreeType ................ no HarfBuzz ............................... yes Using system HarfBuzz ................ no Fontconfig ............................. no Image formats: GIF .................................. yes ICO .................................. yes JPEG ................................. yes Using system libjpeg ............... no PNG .................................. yes Using system libpng ................ no OpenGL: EGL .................................. no Desktop OpenGL ....................... no OpenGL ES 2.0 ........................ no OpenGL ES 3.0 ........................ no OpenGL ES 3.1 ........................ no Session Management ..................... yes Features used by QPA backends: evdev .................................. yes libinput ............................... no mtdev .................................. no tslib .................................. no xkbcommon-evdev ........................ no QPA backends: DirectFB ............................... no EGLFS .................................. no LinuxFB ................................ yes Mir client ............................. no Qt Widgets: GTK+ ................................... no Styles ................................. Fusion Windows Qt PrintSupport: CUPS ................................... no Note: -optimized-tools is not useful in -release mode. WARNING: Accessibility disabled. This configuration of Qt is unsupported. ERROR: Feature 'opengles2' was enabled, but the pre-condition 'config.win32 || (!config.watchos && !features.opengl-desktop && libs.opengl_es2)' failed. ERROR: Feature 'eglfs' was enabled, but the pre-condition 'features.egl' failed. -
@Dang-Vu out put during all a test? your mean is everything while configure run? i'll make a word file for you!
