x86 build problem on x64 windows

[SGaist]

It looks like you are missing the include path to openssl. Did you forgot to add the I and L parameters to point the additional folders when calling configure ?

[Hykkel]

In a way yes. I had written the openssl folder in the configure as well. Is now removed. However, calling configure like the below, gives me the following output. Is it OK that SSL is not mentioned? It seems to work, but I'm just wondering...

Thank you very much for your help!

Input:
configure.bat -opensource -debug-and-release -nomake examples -nomake demos -openssl -I d:\source\development\thirdparty\openssl_release_0-9-8m-3\include -L d:\source\developm
ent\thirdparty\openssl_release_0-9-8m-3\lib

Output:
...
Creating qmake...

Microsoft (R) Program Maintenance Utility Version 11.00.60610.1
Copyright (C) Microsoft Corporation. All rights reserved.

Running configuration tests...
Environment:
INCLUDE=
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\INCLUDE
C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\ATLMFC\INCLUDE
C:\Program Files (x86)\Windows Kits\8.0\include\shared
C:\Program Files (x86)\Windows Kits\8.0\include\um
C:\Program Files (x86)\Windows Kits\8.0\include\winrt

LIB=
  C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\LIB
  C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\ATLMFC\LIB
  C:\Program Files (x86)\Windows Kits\8.0\lib\win8\um\x86

[SGaist]

You should have a look at the configuration log (just before it starts building qmake)

It will show you whether SSL has been activated or not

[dscyw]

@Hykkel I had configure with -I to include openssl include path, but it didn't show in the INCLUDE= after Running configuration tests.

Any ideas why?

[SGaist]

@dscyw can you show the complete configure line as well as configure summary ?

[dscyw]

@dscyw said in x86 build problem on x64 windows:

@Hykkel I had configure with -I to include openssl include path, but it didn't show in the INCLUDE= after Running configuration tests.

Any ideas why?

To summary, my problem is that configure with openssl include path and libray path didn't work, and my build process got stuck in cann't open openssl/ssl.h.

@SGaist
Thanks for your reply.
Configure line is

configure.bat  -static -debug-and-release -prefix C:\Qt\Qt5.6.1_Static  -platform win32-msvc2010 -qt-zlib -qt-pcre -qt-libpng -qt-libjpeg -qt-freetype -opengl desktop -qt-sql-sqlite -qt-sql-odbc -openssl-linked OPENSSL_LIBS="-lssleay32 -llibeay32" -I C:\Libs\openssl_1.0.1j\include -L C:\Libs\openssl_1.0.1j\lib -opensource -confirm-license -make libs  -nomake examples -nomake tests

Configure summary is

Running configuration tests...
Done running configuration tests.
Environment:

    INCLUDE=
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\INCLUDE
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\ATLMFC\INCLUDE
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\include

LIB=
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\LIB\amd64
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\ATLMFC\LIB\amd64
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\lib\x64

    PATH=
      C:\Program Files (x86)\Microsoft F#\v4.0\
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\BIN\x86_amd64
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\BIN
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
      C:\Windows\Microsoft.NET\Framework\v4.0.30319
      C:\Windows\Microsoft.NET\Framework\v3.5
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\VCPackages
      C:\Program Files (x86)\HTML Help Workshop
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\Team 

Tools\Performance
 Tools
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 
Tools
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin
      C:\Python27\
      C:\Python27\Scripts
      C:\Perl64\site\bin
      C:\Perl64\bin
      C:\Windows\system32
      C:\Windows
      C:\Windows\System32\Wbem
      C:\Windows\System32\WindowsPowerShell\v1.0\
      C:\Program Files\Intel\WiFi\bin\
      C:\Program Files\Common Files\Intel\WirelessCommon\
      C:\Program Files (x86)\Common Files\lenovo\easyplussdk\bin
      C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\
      C:\Program Files\Microsoft SQL Server\100\Tools\Binn\
      C:\Program Files\Microsoft SQL Server\100\DTS\Binn\
      C:\Program Files\TortoiseSVN\bin
      C:\Qt\Tools\QtCreator\bin
      C:\Users\EShore\AppData\Local\nasm
      C:\Ruby23-x64\bin
      C:\Users\EShore\AppData\Roaming\Python\Scripts

Configuration:
    precompile_header
    pcre
    debug
    compile_examples

Qt Configuration:
    minimal-config
    small-config
    medium-config
    large-config
    full-config
    debug_and_release build_all release
    debug
    static
    zlib
    gif
    jpeg
    png
    freetype
    harfbuzz
    build_all
    accessibility
    opengl
    ssl
    openssl-linked
    dbus
    audio-backend
    directwrite
    native-gestures
    qpa
    concurrent

QMAKESPEC...................win32-msvc2010 (commandline)
Architecture................x86_64, features: sse sse2
Host Architecture...........x86_64, features: sse sse2
Maketool....................nmake
Debug build.................yes (combined)
Default build...............debug
Force debug info............no
Force optimized tools.......no
C++ language standard.......auto
Link Time Code Generation...no
Using PCH ..................yes
Accessibility support.......yes
RTTI support................yes
SSE2 support................yes
SSE3 support................yes
SSSE3 support...............yes
SSE4.1 support..............yes
SSE4.2 support..............yes
AVX support.................yes
AVX2 support................no
NEON support................no
OpenGL support..............yes
Large File support..........yes
NIS support.................no
Iconv support...............no
Evdev support...............no
Mtdev support...............no
Inotify support.............no
eventfd(7) support..........no
Glib support................no
CUPS support................no
OpenVG support..............no
SSL support.................yes
OpenSSL support.............linked
libproxy support............no
Qt D-Bus support............runtime
Qt Widgets module support...yes
Qt GUI module support.......yes
QML debugging...............yes
DirectWrite support.........yes
Use system proxies..........no

QPA Backends:
    GDI.....................yes
    Direct2D................no

Third Party Libraries:
    ZLIB support............qt
    GIF support.............yes
    JPEG support............yes
    PNG support.............yes
    FreeType support........yes
    Fontconfig support......no
    HarfBuzz support........qt
    PCRE support............qt
    ICU support.............no
    ANGLE...................no
    Dynamic OpenGL..........no

Styles:
    Windows.................yes
    Windows XP..............yes
    Windows Vista...........yes
    Fusion..................yes
    Windows CE..............no
    Windows Mobile..........no

Sql Drivers:
    ODBC....................yes
    MySQL...................no
    OCI.....................no
    PostgreSQL..............no
    TDS.....................no
    DB2.....................no
    SQLite..................yes (qt)
    SQLite2.................no
    InterBase...............no

Sources are in..............C:\Qt\qt-everywhere-opensource-src-5.6.1\qtbase
Build is done in............C:\Qt\qt-everywhere-opensource-src-5.6.1\qtbase
Install prefix..............C:\Qt\Qt5.6.1_Static
Headers installed to........C:\Qt\Qt5.6.1_Static\include
Libraries installed to......C:\Qt\Qt5.6.1_Static\lib
Arch-dep. data to...........C:\Qt\Qt5.6.1_Static
Plugins installed to........C:\Qt\Qt5.6.1_Static\plugins
Library execs installed to..C:\Qt\Qt5.6.1_Static\bin
QML1 imports installed to...C:\Qt\Qt5.6.1_Static\imports
QML2 imports installed to...C:\Qt\Qt5.6.1_Static\qml
Binaries installed to.......C:\Qt\Qt5.6.1_Static\bin
Arch-indep. data to.........C:\Qt\Qt5.6.1_Static
Docs installed to...........C:\Qt\Qt5.6.1_Static\doc
Translations installed to...C:\Qt\Qt5.6.1_Static\translations
Examples installed to.......C:\Qt\Qt5.6.1_Static\examples
Tests installed to..........C:\Qt\Qt5.6.1_Static\tests
Include paths...............C:\Libs\openssl_1.0.1j\include
Additional libraries........-LC:\Libs\openssl_1.0.1j\lib
WARNING: Using static linking will disable the use of plugins.
         Make sure you compile ALL needed modules into the library.

Before I asked you for help, I overlooked the fact that openssl include path and library path had be added to my configure summary. But it didn't work either. I had try nmake clean and then reconfigure & nmake in vain.

Please pay attention to
Include paths...............C:\Libs\openssl_1.0.1j\include
Additional libraries........-LC:\Libs\openssl_1.0.1j\lib
at the bottom of the configure summary.

Why doesn't it appear in INCLUDE and LIB at the top of configure summary. And why library path for openssl is prepended by -L?

PS:
The content of configure.bat from qt source code folder is

set "srcpath=%~dp0"
set "configure=%srcpath%qtbase\configure.bat"
if not exist "%configure%" (
    echo %configure% not found. Did you forget to run "init-repository"? >&2
    exit /b 1
)

if not exist qtbase mkdir qtbase || exit /b 1

echo + cd qtbase
cd qtbase || exit /b 1

echo + %configure% -top-level %*
call %configure% -top-level %*
set err=%errorlevel%

cd ..

exit /b %err%

[SGaist]

Might be a silly question but are you sure all your dependencies are built for the correct architecture ? Using the same compiler ?

[dscyw]

@SGaist Maybe, but I didn't figure it out. I built the same source successfully without any errors a few days ago. This time I just added the openssl support and I built openssl successfully.

[dscyw]

@dscyw said in x86 build problem on x64 windows:

@dscyw said in x86 build problem on x64 windows:

@Hykkel I had configure with -I to include openssl include path, but it didn't show in the INCLUDE= after Running configuration tests.

Any ideas why?

To summary, my problem is that configure with openssl include path and libray path didn't work, and my build process got stuck in cann't open openssl/ssl.h.

@SGaist
Thanks for your reply.
Configure line is

configure.bat  -static -debug-and-release -prefix C:\Qt\Qt5.6.1_Static  -platform win32-msvc2010 -qt-zlib -qt-pcre -qt-libpng -qt-libjpeg -qt-freetype -opengl desktop -qt-sql-sqlite -qt-sql-odbc -openssl-linked OPENSSL_LIBS="-lssleay32 -llibeay32" -I C:\Libs\openssl_1.0.1j\include -L C:\Libs\openssl_1.0.1j\lib -opensource -confirm-license -make libs  -nomake examples -nomake tests

Configure summary is

Running configuration tests...
Done running configuration tests.
Environment:

    INCLUDE=
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\INCLUDE
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\ATLMFC\INCLUDE
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\include

LIB=
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\LIB\amd64
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\ATLMFC\LIB\amd64
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\lib\x64

    PATH=
      C:\Program Files (x86)\Microsoft F#\v4.0\
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\BIN\x86_amd64
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\BIN
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
      C:\Windows\Microsoft.NET\Framework\v4.0.30319
      C:\Windows\Microsoft.NET\Framework\v3.5
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\VCPackages
      C:\Program Files (x86)\HTML Help Workshop
      C:\Program Files (x86)\Microsoft Visual Studio 10.0\Team 

Tools\Performance
 Tools
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin\NETFX 4.0 
Tools
      C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\bin
      C:\Python27\
      C:\Python27\Scripts
      C:\Perl64\site\bin
      C:\Perl64\bin
      C:\Windows\system32
      C:\Windows
      C:\Windows\System32\Wbem
      C:\Windows\System32\WindowsPowerShell\v1.0\
      C:\Program Files\Intel\WiFi\bin\
      C:\Program Files\Common Files\Intel\WirelessCommon\
      C:\Program Files (x86)\Common Files\lenovo\easyplussdk\bin
      C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\
      C:\Program Files\Microsoft SQL Server\100\Tools\Binn\
      C:\Program Files\Microsoft SQL Server\100\DTS\Binn\
      C:\Program Files\TortoiseSVN\bin
      C:\Qt\Tools\QtCreator\bin
      C:\Users\EShore\AppData\Local\nasm
      C:\Ruby23-x64\bin
      C:\Users\EShore\AppData\Roaming\Python\Scripts

Configuration:
    precompile_header
    pcre
    debug
    compile_examples

Qt Configuration:
    minimal-config
    small-config
    medium-config
    large-config
    full-config
    debug_and_release build_all release
    debug
    static
    zlib
    gif
    jpeg
    png
    freetype
    harfbuzz
    build_all
    accessibility
    opengl
    ssl
    openssl-linked
    dbus
    audio-backend
    directwrite
    native-gestures
    qpa
    concurrent

QMAKESPEC...................win32-msvc2010 (commandline)
Architecture................x86_64, features: sse sse2
Host Architecture...........x86_64, features: sse sse2
Maketool....................nmake
Debug build.................yes (combined)
Default build...............debug
Force debug info............no
Force optimized tools.......no
C++ language standard.......auto
Link Time Code Generation...no
Using PCH ..................yes
Accessibility support.......yes
RTTI support................yes
SSE2 support................yes
SSE3 support................yes
SSSE3 support...............yes
SSE4.1 support..............yes
SSE4.2 support..............yes
AVX support.................yes
AVX2 support................no
NEON support................no
OpenGL support..............yes
Large File support..........yes
NIS support.................no
Iconv support...............no
Evdev support...............no
Mtdev support...............no
Inotify support.............no
eventfd(7) support..........no
Glib support................no
CUPS support................no
OpenVG support..............no
SSL support.................yes
OpenSSL support.............linked
libproxy support............no
Qt D-Bus support............runtime
Qt Widgets module support...yes
Qt GUI module support.......yes
QML debugging...............yes
DirectWrite support.........yes
Use system proxies..........no

QPA Backends:
    GDI.....................yes
    Direct2D................no

Third Party Libraries:
    ZLIB support............qt
    GIF support.............yes
    JPEG support............yes
    PNG support.............yes
    FreeType support........yes
    Fontconfig support......no
    HarfBuzz support........qt
    PCRE support............qt
    ICU support.............no
    ANGLE...................no
    Dynamic OpenGL..........no

Styles:
    Windows.................yes
    Windows XP..............yes
    Windows Vista...........yes
    Fusion..................yes
    Windows CE..............no
    Windows Mobile..........no

Sql Drivers:
    ODBC....................yes
    MySQL...................no
    OCI.....................no
    PostgreSQL..............no
    TDS.....................no
    DB2.....................no
    SQLite..................yes (qt)
    SQLite2.................no
    InterBase...............no

Sources are in..............C:\Qt\qt-everywhere-opensource-src-5.6.1\qtbase
Build is done in............C:\Qt\qt-everywhere-opensource-src-5.6.1\qtbase
Install prefix..............C:\Qt\Qt5.6.1_Static
Headers installed to........C:\Qt\Qt5.6.1_Static\include
Libraries installed to......C:\Qt\Qt5.6.1_Static\lib
Arch-dep. data to...........C:\Qt\Qt5.6.1_Static
Plugins installed to........C:\Qt\Qt5.6.1_Static\plugins
Library execs installed to..C:\Qt\Qt5.6.1_Static\bin
QML1 imports installed to...C:\Qt\Qt5.6.1_Static\imports
QML2 imports installed to...C:\Qt\Qt5.6.1_Static\qml
Binaries installed to.......C:\Qt\Qt5.6.1_Static\bin
Arch-indep. data to.........C:\Qt\Qt5.6.1_Static
Docs installed to...........C:\Qt\Qt5.6.1_Static\doc
Translations installed to...C:\Qt\Qt5.6.1_Static\translations
Examples installed to.......C:\Qt\Qt5.6.1_Static\examples
Tests installed to..........C:\Qt\Qt5.6.1_Static\tests
Include paths...............C:\Libs\openssl_1.0.1j\include
Additional libraries........-LC:\Libs\openssl_1.0.1j\lib
WARNING: Using static linking will disable the use of plugins.
         Make sure you compile ALL needed modules into the library.

Before I asked you for help, I overlooked the fact that openssl include path and library path had be added to my configure summary. But it didn't work either. I had try nmake clean and then reconfigure & nmake in vain.

Please pay attention to
Include paths...............C:\Libs\openssl_1.0.1j\include
Additional libraries........-LC:\Libs\openssl_1.0.1j\lib
at the bottom of the configure summary.

Why doesn't it appear in INCLUDE and LIB at the top of configure summary. And why library path for openssl is prepended by -L?

PS:
The content of configure.bat from qt source code folder is

set "srcpath=%~dp0"
set "configure=%srcpath%qtbase\configure.bat"
if not exist "%configure%" (
    echo %configure% not found. Did you forget to run "init-repository"? >&2
    exit /b 1
)

if not exist qtbase mkdir qtbase || exit /b 1

echo + cd qtbase
cd qtbase || exit /b 1

echo + %configure% -top-level %*
call %configure% -top-level %*
set err=%errorlevel%

cd ..

exit /b %err%

Maybe the previous build command is too long and some options conflicted. I checkout the source from git and built successfully with
configure.bat -prefix C:\Qt\Qt570_Static -static -debug-and-release -openssl -I C:\Libs\openssl_1.0.1j\include -L C:\Libs\openssl_1.0.1j\lib -opensource -confirm-license -make libs -nomake examples -nomake tests via Visual Studio 2015.
May it helps. Thank you all the same

[SGaist]

When you built Qt with VS2010, was OpenSSL also built with VS2010 ?

[dscyw]

@SGaist Yes. Now I encountered a new problem, It will be great if you can give me some tips. Thanks in advance. https://forum.qt.io/topic/70878/how-to-use-qt5-static-library