Acess engine within function

SGaist

Do you want to return them as a result of the function call ?

Scottish_Jason

Well I want to return/update the values every time the button is pressed based upon the current qml co-ordinates at that time. I can get the function to launch and grab the appropriate data when I push the button. I just can't update the screen at that point with the new data because engine.rootcontext() doesn't appear to be global. Basically, how can I push stuff to the screen within a function, or is there another more appropriate way to do it?

SGaist

One thing I didn't notice at first. You are creating a new engine, a new ui and a new temporary MyClass object in your clickedButton slots. Looks that's not really what you wanted to do.

A cleaner way would be to add two properties to your MyClass object and update them with the content of your database.

class MyClass : public QObject {
Q_OBJECT
Q_PROPERTY(QString decile READ decile WRITE setDecile NOTIFY decileChanged)
Q_PROPERTY(QString postCode READ postCode WRITE setPostCode NOTIFY postCodeChanged)

QString postCode() const { return _postCode; }

signals:
void decileChanged(const QString& decile);
void postCodeChanged(const QString& postCode);

public slots:
void setDecile(const QString& decile) 
{
    if (_decile == decile) {
        return;
    }
    _decile = decile;
    emit decileChanged(decile);
}
// same for post code

void update(/*Parameters you need*/) {
// grab data from your database
setDecile(decileFromDatabase);
setPostCode(postCodeFromDatabase);
}

private:
    QString _decile;
    QString _postCode;
};

Then you only have to use the object in your QML and call update where needed.

WARNING: Not built nor tested. There might be better designs but the specs were a little short.

Scottish_Jason

Thanks very much for your reply. I am currently trying to implement it now.
The problem is how do I read the qml latitude and longitude inside the update function. The current GPS co-ordinates are required in order to complete the database check.

void update(/*Parameters you need*/) {

*** Need GPS co-ordinates to grab data ***
 
//QVariant latitude = QQmlProperty::read(object2, "icoordlat");
//QVariant longitude = QQmlProperty::read(object2, "icoordlon");       **<<<< how to read qml variables here?**

// grab data from your database

setDecile(decileFromDatabase);
setPostCode(postCodeFromDatabase);
}

Thanks for all your help

SGaist

What are you using to get the GPS data ?

Scottish_Jason

@SGaist

I used QQmlProperty to read *object

  MyClass myClass;
  QQmlApplicationEngine engine;
  QQmlEngine engine2;

   QQmlComponent component(&engine2,QUrl(QStringLiteral("qrc:/MainForm.ui.qml")));
   QObject *object = component.create();

//

QVariant latitude = QQmlProperty::read(object, "icoordlat");
QVariant longitude = QQmlProperty::read(object, "icoordlon");

SGaist

It looks like you are trying to go back and forth between QML and C++ rather than trying to use the usual channels to communicate between both.

Where are you setting these two values ?

Scottish_Jason

Hey I set them in my MainForm.ui.qml. From my research of QML it seemed this was the common way to communicate between C++ and QML. Basically, I am trying to get these qt positioning values over to C++ so that they can be evaluated against a database and then the output presented on the screen. I didn't think it would be this difficult to interface between the two. Any help sending me down the right path would be great.

Mainform.ui.qml

import QtQuick 2.5
import QtPositioning 5.5
import QtLocation 5.5
import QtQuick.Controls 1.4


Rectangle
{
    width: 360
    height: 360
    property alias item1: item1
    property alias toolButton1: toolButton1
    property alias src: src
property string icoordlat: src.position.coordinate.latitude
property string icoordlon: src.position.coordinate.longitude
    Item
{
    id: item1
        PositionSource
        {
        id: src
        updateInterval: 1000
        active: true
        property double icoordlat: src.position.coordinate.latitude
        property double icoordlon: src.position.coordinate.longitude
        }


}
    MouseArea
    {
        id: mouseArea
        anchors.rightMargin: 0
        anchors.bottomMargin: 0
        anchors.leftMargin: 0
        anchors.topMargin: 0
        anchors.fill: parent

     Text
    {
        id: t1
        width: 343
        height: 145
        font.pointSize: 60
        anchors.centerIn: parent
        text: decile
        anchors.verticalCenterOffset: 9
        anchors.horizontalCenterOffset: 1

    }
    Text
    {
        id: t2
        width: 343
        height: 106
        font.pointSize: 44
        anchors.centerIn: parent
        text: postcode
        anchors.verticalCenterOffset: -119
        anchors.horizontalCenterOffset: 1

    }
    Text
    {
        id: t3
        width: 343
        height: 106
        font.pointSize: 16
        anchors.centerIn: parent
        text: src.position.coordinate.latitude
        anchors.verticalCenterOffset: 120
        anchors.horizontalCenterOffset: 1

    }
    Text
    {
        id: t4
        width: 343
        height: 106
        font.pointSize: 16
        anchors.centerIn: parent
        text: src.position.coordinate.longitude
        anchors.verticalCenterOffset: 160
        anchors.horizontalCenterOffset: 1

    }

    ToolButton
    {
        id: toolButton1
        width: 233
        height: 233
        anchors.verticalCenterOffset: 200
        text: "Refresh"


    }


    }
}

This is where I get the function to execute on button push

main.qml

Window
{
    visible: true

    MainForm
    {
        toolButton1.onClicked:
        {
        obj.clickedButton();
        }
        anchors.fill: parent

    }

}

SGaist

In your onClick handler, you can retrieve the values from icoordlat, icoordlon since they are properties of your Mainform and pass them to clickButton.
Some thing like

onClicked: 
{
    obj.clicked(icoordlat, icoordlon);
}

No need to try to go through the engine.

I'd recommend taking a look at the QtQml C++ integration chapter from Qt's documentation.

Scottish_Jason

@SGaist

Hi thanks very much for the reply again. I have modified my code and I am able to get the application to compile.
I'm able to pass the long & lat over to C++ and get the result (seen with qDebug) but the qml screen data does not get refreshed with :

setDecile(decile);
setPostCode(postCode);

main.h

#ifndef MAIN_H
#define MAIN_H
#include <QObject>
#include <QDebug>
#include <QQuickItem>
#include <QGuiApplication>
#include <QQmlApplicationEngine>
#include <QDebug>
#include <QUrl>
#include <QQmlContext>
#include <QQmlComponent>
#include <QQmlProperty>
#include <QSqlDatabase>
#include <QtSql>
#include <QtPositioning/QGeoCoordinate>
#include <QtNetwork/QNetworkAccessManager>
#include <QtNetwork/QNetworkReply>
#include <QGeoAddress>
#include <QObject>
#include <QQuickItem>
#include <QQuickView>

class MyClass : public QObject {
Q_OBJECT
Q_PROPERTY(QString decile READ decile WRITE setDecile NOTIFY decileChanged)
Q_PROPERTY(QString postCode READ postCode WRITE setPostCode NOTIFY postCodeChanged)

QString postCode() const { return _postCode; }
QString decile() const { return _decile; }

signals:
void decileChanged(const QString& decile);
void postCodeChanged(const QString& postCode);

public slots:
void setDecile(const QString& decile)
{
    if (_decile == decile) {
        return;
    }
    _decile = decile;
    emit decileChanged(decile);
}
void setPostCode(const QString& postCode)
{
    if (_postCode == postCode) {
        return;
    }
    _postCode = postCode;
    emit postCodeChanged(postCode);
}

void update(QString icoordlat, QString icoordlon)
{

    QString dbname = "affluence.sqlite";
    QString filePath = QStandardPaths::writableLocation(QStandardPaths::AppLocalDataLocation);
    filePath.append( "/"+dbname);
    QSqlDatabase dbsqlite = QSqlDatabase::addDatabase("QSQLITE","dbsqlite");

    dbsqlite.setDatabaseName(filePath);
    dbsqlite.open();

    if (dbsqlite.open())
    {

        QString Qlatitude2 = icoordlat.left(6);
        QString Qlongitude2 = icoordlon.left(6);
        QString perc = "%";
        Qlatitude2 = Qlatitude2 + perc;
        Qlongitude2 = Qlongitude2 + perc;
        qDebug() << "soup: " << Qlatitude2 << Qlongitude2;
        QSqlQuery querydb(dbsqlite);
        querydb.prepare("select * FROM affluence WHERE latitude LIKE :Qlatitude AND longitude LIKE :Qlongitude");
        querydb.bindValue(":Qlatitude",  Qlatitude2);
        querydb.bindValue(":Qlongitude",  Qlongitude2);
        querydb.exec();

        while (querydb.next())
        {
        QString Qlatitude3 = querydb.value(4).toString();
        QString Qlongitude3 = querydb.value(5).toString();
        QString decile = querydb.value(3).toString();
        QString postCode = querydb.value(2).toString();

        setDecile(decile);
        setPostCode(postCode);
        
        qDebug() << "latitude: " << Qlatitude3 << " longitude: " << Qlongitude3 << " decile: " << decile << "post code:" << postCode;
        }
    }
    else
    {
        qDebug() << "can't connect to sqlite " << dbsqlite.lastError();
    }

}

private:
    QString _decile;
    QString _postCode;
};


#endif // MAIN_H

main.cpp

int main(int argc, char *argv[])
{


    QGuiApplication app(argc, argv);
    MyClass myClass;
    QQmlApplicationEngine engine;
    QQmlEngine engine2;

    QQmlComponent component(&engine2,QUrl(QStringLiteral("qrc:/MainForm.ui.qml")));
    QObject *object = component.create();


    engine.rootContext()->setContextProperty(QStringLiteral("obj"), &myClass);

 
    engine.load(QUrl(QStringLiteral("qrc:/main.qml")));

    return app.exec();
}

main.qml

import QtQuick 2.5
import QtQuick.Window 2.2
import QtPositioning 5.5
import QtLocation 5.6
import QtPositioning 5.2

Item
{

Window
{
    visible: true

    MainForm
    {
        toolButton1.onClicked:
        {
        obj.update(icoordlat, icoordlon);
        }
        anchors.fill: parent

    }



}
}

MainForm.ui.qml

import QtQuick 2.5
import QtPositioning 5.5
import QtLocation 5.5
import QtQuick.Controls 1.4


Rectangle
{
    width: 360
    height: 360
    property alias item1: item1
    property alias toolButton1: toolButton1
    property alias src: src
property string icoordlat: src.position.coordinate.latitude
property string icoordlon: src.position.coordinate.longitude
    Item
{
    id: item1
        PositionSource
        {
        id: src
        updateInterval: 1000
        active: true
        property double icoordlat: src.position.coordinate.latitude
        property double icoordlon: src.position.coordinate.longitude
        }


}
    MouseArea
    {
        id: mouseArea
        anchors.rightMargin: 0
        anchors.bottomMargin: 0
        anchors.leftMargin: 0
        anchors.topMargin: 0
        anchors.fill: parent

     Text
    {
        id: t1
        width: 343
        height: 145
        font.pointSize: 60
        anchors.centerIn: parent
        text: decile
        anchors.verticalCenterOffset: 9
        anchors.horizontalCenterOffset: 1

    }
    Text
    {
        id: t2
        width: 343
        height: 106
        font.pointSize: 44
        anchors.centerIn: parent
        text: postcode
        anchors.verticalCenterOffset: -119
        anchors.horizontalCenterOffset: 1

    }
    Text
    {
        id: t3
        width: 343
        height: 106
        font.pointSize: 16
        anchors.centerIn: parent
        text: src.position.coordinate.latitude
        anchors.verticalCenterOffset: 120
        anchors.horizontalCenterOffset: 1

    }
    Text
    {
        id: t4
        width: 343
        height: 106
        font.pointSize: 16
        anchors.centerIn: parent
        text: src.position.coordinate.longitude
        anchors.verticalCenterOffset: 160
        anchors.horizontalCenterOffset: 1

    }

    ToolButton
    {
        id: toolButton1
        width: 233
        height: 233
        anchors.verticalCenterOffset: 200
        text: "Refresh"


    }


    }
}

SGaist

I may have missed it but I don't see any use of obj properties in your code.

Scottish_Jason

@SGaist

when I used the "go to slot" option on the button it created the function inside main.qml so I just went with that

main.qml

import QtQuick 2.5
import QtQuick.Window 2.2
import QtPositioning 5.5
import QtLocation 5.6
import QtPositioning 5.2

Item
{

Window
{
    visible: true

    MainForm
    {
        toolButton1.onClicked:
        {
        obj.update(icoordlat, icoordlon);
        }
        anchors.fill: parent

    }



}
}

and obj is set inside main.cpp

int main(int argc, char *argv[])
{


    QGuiApplication app(argc, argv);
    MyClass myClass;
    QQmlApplicationEngine engine;
    QQmlEngine engine2;

    QQmlComponent component(&engine2,QUrl(QStringLiteral("qrc:/MainForm.ui.qml")));
    QObject *object = component.create();


    engine.rootContext()->setContextProperty(QStringLiteral("obj"), &myClass);

 
    engine.load(QUrl(QStringLiteral("qrc:/main.qml")));

    return app.exec();
}

Scottish_Jason

for anybody with the same questions I managed to get it working by adding a connection in the QML

Connections
        {
            id: conn2
            target: obj
            ignoreUnknownSignals: true
            onPostCodeChanged:
            {
                t2.text = postCode
            }
        }

Thanks SGaist !

SGaist

AFAIK, you shouldn't need that:

Text
{
    id: t2
    text: obj.postCode
}

should do what you want automatically through the binding.