Bulding problem (qtmuldimedia -no-opengl problem)

PyroByte

Hello everyone,

3 days ago i downloaded the last Qt release 5.4.0 and i wanted to compile the Source for static linkage, but i got this problem with the qtmuldimedia.(http://qt-project.org/wiki/Qt540-KnownIssues) I saw that there is a patch for this issue, but when i applied the patch i get the same errors. I was following this tutorial: https://stackoverflow.com/questions/14932315/how-to-compile-qt-5-under-windows-or-linux-32-or-64-bit-static-or-dynamic-on-v

I used these commands:

@>configure -debug-and-release -opensource -platform win32-msvc2013 -opengl desktop -static -nomake examples -nomake tests

jom.exe

nmake@

Tried to compile the source like 4/5 times and i always get these LNK errors.

SGaist

Hi and welcome to devnet,

You should post the exact error you are currently getting

PyroByte

Sorry for my late answer.

These are the errors i get when i compile my program with the compiled Qt 5.4.0 Source:

https://www.dropbox.com/s/ceap41dekn9jv11/output.txt?dl=0

I did the same configuration on 5.3.2 and it worked fine, but with 5.4.0 i always get these errors.

SGaist

Something's not clear. Is it Qt that you are failing to build or your application ?

PyroByte

My application is failing to build. I wrote in my first post that i've compiled Qt 5.4.0 with static linkage.

Here is what i get when jom finish:
https://www.dropbox.com/s/etp3xb1n18q42ku/hWFU5M6kV6R6SCzmcI2M6hPEeTh7KiW2QCGrjEy6cG4.png?dl=0

And this is from nmake:
https://www.dropbox.com/s/4dvmn3w3a1ni62y/llHApFO!34PoFjAAHJlKFH1234O.png?dl=0

It's all fucked up.

So, if im doing something wrong, could you tell me how to compile Qt 5.4.0 with static linkage?

SGaist

From your screen shots, it looks rather that Qt is failing to build.

Did you reconfigure for a static build an already built Qt ?

PyroByte

I just downloaded the last Qt 5.4.0 Source and tried to compile it by following this tutorial: https://stackoverflow.com/questions/14932315/how-to-compile-qt-5-under-windows-or-linux-32-or-64-bit-static-or-dynamic-on-v

I was following these steps to compile the Qt 5.4.0 source for static linkage.

I've edited C:\Qt\5.4\Src\qtbase\mkspecs\win32-msvc2013\qmake.conf the following lines:

from->
@QMAKE_CFLAGS_RELEASE = -O2 -MD -Zc:strictStrings
QMAKE_CFLAGS_RELEASE_WITH_DEBUGINFO += -O2 -MD -Zi -Zc:strictStrings
QMAKE_CFLAGS_DEBUG = -Zi -MDd@

to->

@QMAKE_CFLAGS_RELEASE = -O2 -MT -Zc:strictStrings
QMAKE_CFLAGS_RELEASE_WITH_DEBUGINFO += -O2 -MT -Zi -Zc:strictStrings
QMAKE_CFLAGS_DEBUG = -Zi -MTd@

I've applied this patch: https://codereview.qt-project.org/#/c/101817
Then i executed the following commands in CMD:

@set QMAKESPEC=win32-msvc2013
set QTDIR=C:\Qt\5.4\Src\qtbase
set PATH=C:\Qt\5.4\Src\qtbase\bin;%PATH%@

And the last thing i did is executing the following commands in visual studio developer command prompt

@>configure -debug-and-release -opensource -platform win32-msvc2013 -opengl desktop -static -nomake examples -nomake tests

jom.exe

nmake@

As u can see at the screenshots in my previous post, this is what i get when "jom.exe" and "nmake" finish.

So, i am having issues with compiling the Qt 5.4.0 source for static build and then i get LNK errors when i try to compile my application.

Can someone just tell me how to compile Qt 5.4.0 source with Visual Studio 2013 for static build?

SGaist

Ok, QtDeclarative should not even build when no OpenGL is selected since AFAIK it requires it.

What I'd do first is to build qtbase only and then the additional needed modules.

PyroByte

Would you give me some more details of the building process?

SGaist

Same as current but either remove the qtdeclarative folder from the sources or call configure directly in qtbase. However you should rather do an out of source build. That way you can more easily start a new build with a different set of parameters (i.e. nuke the current and state from a clean state)

PyroByte

EDIT:

I did exactly what you said. I've compiled the qtbase folder only, i've also deleted qtdeclarative folder before compiling the source and used option -no-opengl while compiling the source. And the same issue again..

main.cpp
https://www.dropbox.com/s/ofb6949t2wnnekv/main.png?dl=0

output
https://www.dropbox.com/s/he8ij3ow92th0is/output.png?dl=0

SGaist

Did you add the plugin to QTPLUGIN in your pro file ?

PyroByte

I am not sure what you are talkin about. What plugin? What pro file? I am using
Visual Studio to compile my application. There is no pro file. Should i make it manually or generate it? And what exactly i have to add in the file?

SGaist

You have Q_IMPORT_PLUGIN in your main.cpp, this means that you must have a corresponding QTPLUGIN in a pro file, however I don't know where to add that using the Visual Studio add-in

PyroByte

[quote author="SGaist" date="1421104297"]You have Q_IMPORT_PLUGIN in your main.cpp, this means that you must have a corresponding QTPLUGIN in a pro file, however I don't know where to add that using the Visual Studio add-in[/quote]

That has nothing to do with the errors i get.

SGaist

It has at least for the very first error. For the others, it related to the harfbuzz library

PyroByte

It seems that no one can help me, some of the moderators can close the topic. I am very disappointed!