[Solved] QTcpServer won't call "incomingConnection" in Windows applications

? Offline

Am I the only one to have that problem?

For information, same code was working under Ubuntu using Qt 5.2.1

dheerendra

what is happening at the client side ? You can use the following two signals

error()
connected()

Connect these two slots at client side to some function. Error function should give what is the error if not able to connect.

My suspect is that IP address passed from client is some how not correct.

Do you have client and server on the same system ?
Are you running client & servers running in different system ?

If they are running different system, just check IP address of server you used to connect.

If you are not able to verify with any of the above, then we can check the network packets with wireshark and see whatz is happening at network level. This is our last and final step. Hope we don't reach this.

? Offline

Test is done using 127.0.0.1 on the same system.

On client side it's pretty simple:
if (! tcpSocket->waitForConnected() ){
cerr << "could not find host" << endl;
exit(1);
}

cout << "connect state " << tcpSocket->state();

Connect state shows 3, which is state "Connected" I believe.

So yes, client really seems to get connected, and as I stated before, the server signal "newConnection" is emitted when client is run...

Really strange.... Just seems that the server mechanism to call "incomingConnection " is not working on my windows system... Any change has been done from 5.2.1 to 5.3.1??

dheerendra

client really seems to get connected, and as I stated before, the server signal >“newConnection” is emitted when client is run

What do you mean here ? newConnection signal is emitted at server when client is run ? Do you mean to say signal is not emitted when client is connecting but it emits later ?

? Offline

Yes exactly, the server signal is emitted as soon as the client connects.

But I used that signal just to check if server was seing the connection, as I intially just wanted to get the incomingConnection call mechanism to work, exactly as in the threaded fortune server Qt example.

dheerendra

Since newConnection is happening it means that incomingConnection(..) is surely working. Internally base implementation calls incommingConnection(..) when ever the connection request arrives.

Last thing I would like to see is the your class declaration where incomingConnection(...) is defined and it's corresponding implementation. You can paste the code here.

? Offline

oh dear oh dear...

I think I got it....

In the Qt example it's declared

protected:
void incomingConnection(int socketDescriptor);

But actually it's a qintptr socketDescriptor ...

So I guess it was recognised as a qintptr under my 32bit linux... But a different method when compiled on my windows 64 system...

I can't test it right now but I'm pretty sure that's the issue...

I'll tell you tomorrow :)

SGaist

Hi,

Are you by any chance looking at a Qt 4.8 example while using Qt 5 ?

? Offline

Yes seems I got trapped by the Qt version when looking at the example...

That was a nice trap to get into :p

Still didn't test with the new definition but pretty confident that was my issue :p

SGaist

Which example was it ?

? Offline

I first looked at the correct examples, but probably came back to the wrong one with a google search pointing to an old example version :(

Here was the old one declared as an "int".
http://qt-project.org/doc/qt-4.8/network-threadedfortuneserver.html

I recompiled this for 64 bit just changing int into qintptr and: now it works like a charm!!!

Thanks for the help, will be more carefull with the new qtype declarations :p