Using a /dev/tty as if it were a serial port
-
So, somewhat complex setup: I have written a bunch of code to talk to an external device that's connected with a USB-serial interface such as an FTDI adapter. I'm using QSerialPort to do all this. Works great. Now what I'd like to do is access this stuff remotely over a network. I've got a Linux single-board computer with serial ports. I've managed to figure out how to do this with socat. On my desktop machine, socat creates a pseudo terminal in the form of /dev/ttys001. I've tested this with a simple modem-style terminal program on the remote end and cat'ing the /dev/ttys001. So this part works.
Where I'm having trouble is that QSerialPort doesn't work with just any /dev entry. Even though I tried hacking the module to remove file name filtering, opening the port fails because configuration functions such as setting the baud rate or parity don't work.
So, the question is: How do you talk to a /dev/tty without completely throwing away all the QSerialPort code I've written? I don't really need flow control stuff but I do need waitForReadyRead and peek functionality.
-
Hi,
In your case, wouldn't a QFile be enough ?
-
Apparently not.
I did manage to figure out a workable solution. I run ser2net on the embedded computer which makes things like /dev/ttyUSB0 available as TCP ports on the network. That's only half the solution though. I had to modify my Qt code to use a QTcpSocket instead of QSerialPort. This works since ser2net takes care of the serial protocol and since I don't need flow control or DTR/CTS lines.
Kudos to the Qt designers for structuring the QIODevice system the way it is.
Tested two hardware devices now. So far, so good.
-
That was going to be my next suggestion :)
Since you have it working now, please update the thread title prepending [solved] so other forum users may know a solution has been found :)