Project ERROR: Unknown module(s) in QT: quick

raghaw

just for your information during configure i got these errors types

make: *** [pulseaudio.o] Error 1

compilation terminated.
make: *** [opengldesktop.o] Error 1

opengles2.cpp:45:25: fatal error: GLES2/gl2.h: No such file or directory
#include <GLES2/gl2.h>
^
compilation terminated.
make: *** [opengles2.o] Error 1

#include <ft2build.h>
^
compilation terminated.

libudev.cpp:42:21: fatal error: libudev.h: No such file or directory
#include <libudev.h>
^
compilation terminated.
make: *** [libudev.o] Error 1
libudev disabled.
evdev auto-detection... ()
/home/ubuntu/Raghaw/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -c -pipe -marm -mfpu=neon -mfloat-abi=hard -O2 -Wall -W -fPIE -I../../../mkspecs/linux-arm-gnueabi-g++ -I. -o evdev.o evdev.cpp
/home/ubuntu/Raghaw/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -Wl,-O1 -o evdev evdev.o
evdev enabled.
XLib auto-detection... ()
/home/ubuntu/Raghaw/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -c -pipe -marm -mfpu=neon -mfloat-abi=hard -O2 -Wall -W -fPIE -I../../../mkspecs/linux-arm-gnueabi-g++ -I. -o xlib.o xlib.cpp
xlib.cpp:42:22: fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
^
compilation terminated.
make: *** [xlib.o] Error 1

#include <xcb/xcb.h>
^
compilation terminated.
make: *** [xcb.o] Error 1
xcb disabled.
LinuxFB auto-detection... ()
/home/ubuntu/Raghaw/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -c -pipe -marm -mfpu=neon -mfloat-abi=hard -O2 -Wall -W -fPIE -I../../../mkspecs/linux-arm-gnueabi-g++ -I. -o linuxfb.o linuxfb.cpp
/home/ubuntu/Raghaw/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -Wl,-O1 -o linuxfb linuxfb.o
LinuxFB enabled.
KMS auto-detection... ()
Project ERROR: Package libudev not found
make: *** No targets specified and no makefile found. Stop.

openvg.cpp:48:23: fatal error: VG/openvg.h: No such file or directory
#include <VG/openvg.h>
^
compilation terminated.
make: *** [openvg.o] Error 1
OpenVG disabled.
OpenVG auto-detection... ()
/home/ubuntu/Raghaw/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-g++ -c -pipe -marm -mfpu=neon -mfloat-abi=hard -O2 -Wall -W -fPIE -I../../../mkspecs/linux-arm-gnueabi-g++ -I. -o openvg.o openvg.cpp
openvg.cpp:48:23: fatal error: VG/openvg.h: No such file or directory
#include <VG/openvg.h>
^
compilation terminated.
make: *** [openvg.o] Error 1

Build options:
Configuration .......... accessibility audio-backend c++11 clock-gettime clock-monotonic compile_examples concurrent cross_compile evdev eventfd freetype full-config getaddrinfo getifaddrs iconv inotify ipv6ifname large-config largefile linuxfb medium-config minimal-config mremap neon nis no-pkg-config pcre png precompile_header qpa qpa reduce_exports reduce_relocations release rpath shared small-config v8 v8snapshot zlib
Build parts ............ libs
Mode ................... release
Using C++11 ............ yes
Using PCH .............. yes
Target compiler supports:
iWMMXt/Neon .......... no/yes

Qt modules and options:
Qt D-Bus ............... no
Qt Concurrent .......... yes
Qt GUI ................. yes
Qt Widgets ............. yes
JavaScriptCore JIT ..... yes (To be decided by JavaScriptCore)
QML debugging .......... yes
Use system proxies ..... no

Support enabled for:
Accessibility .......... yes
ALSA ................... no
CUPS ................... no
FontConfig ............. no
Iconv .................. yes
ICU .................... no
Image formats:
GIF .................. yes (plugin, using system library)
JPEG ................. yes (plugin, using bundled copy)
PNG .................. yes (in QtGui, using bundled copy)
Glib ................... no
GStreamer .............. no
GTK theme .............. no
Large File ............. yes
libudev ................ no
Networking:
getaddrinfo .......... yes
getifaddrs ........... yes
IPv6 ifname .......... yes
OpenSSL .............. no
NIS .................... yes
OpenGL ................. no
OpenVG ................. no
PCRE ................... yes (bundled copy)
pkg-config ............. no
PulseAudio ............. no
QPA backends:
DirectFB ............. no
EGLFS ................ no
KMS .................. no
LinuxFB .............. yes
XCB .................. no
Session management ..... yes
SQL drivers:
DB2 .................. no
InterBase ............ no
MySQL ................ no
OCI .................. no
ODBC ................. no
PostgreSQL ........... no
SQLite 2 ............. no
SQLite ............... yes (plugin, using bundled copy)
TDS .................. no
udev ................... no
xkbcommon .............. no
zlib ................... yes (bundled copy)

Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into /usr/local/Qt-5.1.1

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

So does this is source of problem??But after this also i was able to make && make install.

sierdzio

Compile Qt with -opengl desktop. You don't have OpenGL ES 2 on your PC, and rightly so: if desktop OpenGL is available, it's better to use that.

Check out the compilation guide I have provided, it lists all dependencies and how to install them on Ubunutu.

raghaw

Hi Do i need to add some plugin of Qdeclarative5 and QtQuick2 to access its classes.?

sierdzio

Classes? In C++? Most of them are private and you can't officially access them. The ones blessed with being public are QQml* classes, and QQuickView, QQuickItem, QQuickPaintedItem.

No plugins are required here. if you compile Qt correctly, it will all be there by default.

raghaw

I tried compiling with -opengl desktop flag but in the end i got this message

"You might need to modify the include and library search paths by editing
QMAKE_INCDIR_OPENGL, QMAKE_LIBDIR_OPENGL and QMAKE_LIBS_OPENGL in
/home/ubuntu/Raghaw/Qt5.1.1/qtbase/mkspecs/linux-arm-gnueabi-g++."

What to do with these???

sierdzio

This has something to do with cross-compiling. I have somehow assumed you are compiling for the desktop, my bad. I don't know how to help you in this case, sorry.

raghaw

Yeah u r somewhat right ..my plan is to compile Qt5 with linaro toolchain for desktop.Create the Application and then flash it on imx6 board.Is this feasible??

SGaist

Hi,

It's not exactly like that, you cross-compile Qt with the linaro tool chain , then you use that version to compile your application for your target and copy it on. In between you can develop it using the Desktop version on your computer.

You can search through the forum, there have been several posts about cross-compiling Qt 5 for the imx6

maatong

I think we met the same problem here.
Have you solved this?

neozaru

Same problem. Compiled with "angle" (Windows, Mingw32) option. Qtdeclarative (quick1) was compiled but not QtQuick2.
I thought it was not configured by default but there is no "-quick" or "-quick2" option in the "configure" script, nor in the "configure" output.

Are the compilation logs stored somewhere ? (took about 4H)

jlwall

I have had the same problem with not having qt creator being able to use declarative, quick, or qml

In my case, its a cross-compile for an imx6 with linaro. build, qt5.2.1base, the script, the declarative make + sudo make install
no issues, things and demos run on the target, and I can compile QT command line apps, but not quick1, or 2

I also tried with a buildroot release of 2014.05, and this works and compiles the libs and examples to run on target, yet QTCreator cannot find quick or qml in the pro when included, and will not compile my own applications.

As always I am assuming I have done something stupid from the beginning, perhaps in the configure -prefix area?

If anyone has identified why this happens, I would appreciate some advice

SGaist

Hi and welcome to devnet,

Did you cross-compiled/installed all related modules ?