[solved]Need a help in building (Qt5.1.1)qtmultimedia with gstreamer

maatong

[quote author="sakshi" date="1388040327"]hi all i have solved this problem.
exporting package config path was not proper due to which configuration was failing:

export PKG_CONFIG_DIR= export PKG_CONFIG_LIBDIR=${SYSROOT}/usr/lib/pkgconfig:${SYSROOT}/usr/share/pkgconfig export PKG_CONFIG_SYSROOT_DIR=${SYSROOT}

configure and build again.

Hope this might help some one.[/quote]

Hi sakshi,
I met the same problem here, my qt version is 5.3.0, I can only use git to get this version, and my arm cpu is imx6, just like yours.

about there lines:

export PKG_CONFIG_DIR= export PKG_CONFIG_LIBDIR=${SYSROOT}/usr/lib/pkgconfig:${SYSROOT}/usr/share/pkgconfig export PKG_CONFIG_SYSROOT_DIR=${SYSROOT}

Do I need to add them to my qmake.conf files?
And when should I do this, before or after I make the qtmultimedia modules?
I'm a beginner of Qt and Embedded system here, so I sometimes just maybe ask silly question, sorry for troubling you.
Thanks a lot.

maatong

And when I trie to add -gstreamer to my ./configure,
this error appears:
-gstreamer: invalid command-line switch
So I can't add this on 5.3.0?

sakshi

open a terminal, export your cross compiler path,
then type the following command:
~/Qt5.1.1 $ export PKG_CONFIG_DIR=

~/Qt5.1.1 $ export PKG_CONFIG_LIBDIR=${SYSROOT}/usr/lib/pkgconfig:${SYSROOT}/usr/share/pkgconfig

~/Qt5.1.1 $ export PKG_CONFIG_SYSROOT_DIR=${SYSROOT}

Do this before You run configuration. then configure. and then do make.

follow this link for basic build:

maatong

[quote author="sakshi" date="1398931421"]open a terminal, export your cross compiler path,
then type the following command:
~/Qt5.1.1 $ export PKG_CONFIG_DIR=

~/Qt5.1.1 $ export PKG_CONFIG_LIBDIR=${SYSROOT}/usr/lib/pkgconfig:${SYSROOT}/usr/share/pkgconfig

~/Qt5.1.1 $ export PKG_CONFIG_SYSROOT_DIR=${SYSROOT}

Do this before You run configuration. then configure. and then do make.

follow this link for basic build:

Hi sakshi:
Thank you very much for your respond.
And after I reading your blog, I have some questions that,
"first download qt-everywhere-opensource-src-5.1.1.tar.gz.
then untar it on your home folder."
When I build 5.3.0 by git, I first downloaded a file system that I run on the board to my computer, then I untar it to a folder. After this, I built a same file system as my board on my computer. Then I untar the toolchain to this folder. But in your building process, It seemed that you didn't download a file system on your computer, so my question is that, if I install 5.1.1 cross compiler, I don't need to download the file system? Does it fit all the file systems? Or at any step in the process, a file system is downloaded but I didn't realize that?
And after install the cross compiler on my PC, need I copy some folder to my target board to run a program?
Thank you very much.
It's hard to find a person which succeeded building a cross complier on imx6 around me so I'm very glad to know you and appreciate for your help.

sakshi

Hi,
Sorry, I have never tried cross compiling Qt from git. It may be easier. But i find little complicated.

the procedure i followed is: go to http://qt-project.org/downloads
click on show downloads.
search for a qt source zip. not binary.
FYI(search at the end of the list - You can get split source packages from here. The source code is also available as a single *zip * (277 MB) (Info) file for Windows users or as tar.gz (223 MB) (Info) file for Linux/Mac users. All the installers are available also here. Or visit the repository at qt.gitorious.org/qt) click on zip which will download qt-everywhere-opensource-src-5.2.1.zip

i have no idea about 5.3. But last time i saw is qt 5.2.1 open source.

cross compiler: I had arm-fsl-linux-gnueabi

i had built qt on host. not on target.
on host export crosscompiler path: for example
export PATH=/opt/freescale/usr/arm-fsl-linux/bin

Next follow the procedure from the blog.

when u do make install it will install qt binaries on specified folder.

copy that folder to your target.

maatong

[quote author="sakshi" date="1398966822"]Hi,
Sorry, I have never tried cross compiling Qt from git. It may be easier. But i find little complicated.

the procedure i followed is: go to http://qt-project.org/downloads
click on show downloads.
search for a qt source zip. not binary.
FYI(search at the end of the list - You can get split source packages from here. The source code is also available as a single *zip * (277 MB) (Info) file for Windows users or as tar.gz (223 MB) (Info) file for Linux/Mac users. All the installers are available also here. Or visit the repository at qt.gitorious.org/qt) click on zip which will download qt-everywhere-opensource-src-5.2.1.zip

i have no idea about 5.3. But last time i saw is qt 5.2.1 open source.

cross compiler: I had arm-fsl-linux-gnueabi

i had built qt on host. not on target.
on host export crosscompiler path: for example
export PATH=/opt/freescale/usr/arm-fsl-linux/bin

Next follow the procedure from the blog.

when u do make install it will install qt binaries on specified folder.

copy that folder to your target.
[/quote]

Hi:
Thank you for the respond.
May I know that what kind of system that on your target board?
And need I copy a same file system into my computer for make?
In the qmake.conf file on your blog, there's a $$ROOTFS there, does it stands for the file system that on the board?
Thanks.

sakshi

my target is linux operating system. I dont have anything on the board. My targets file system is on my host. and i use telnet on the board to get root file system from the host.

You can copy the complete file system to the host and try building.
Before that make sure You have all the required packages installed on target file system. for example if you are stuck in multimedia audio it needs gstreamer, glib pulse audio etc.. so install all the dependencies on the file system and the copy it on the host.

Or easier way copy qt source on your target. and install gcc related packages(which is required) and compile qt on the board. Which is exactly like compiling qt on the host. :)

maatong

[quote author="sakshi" date="1398969109"]my target is linux operating system. I dont have anything on the board. My targets file system is on my host. and i use telnet on the board to get root file system from the host.

You can copy the complete file system to the host and try building.
Before that make sure You have all the required packages installed on target file system. for example if you are stuck in multimedia audio it needs gstreamer, glib pulse audio etc.. so install all the dependencies on the file system and the copy it on the host.

Or easier way copy qt source on your target. and install gcc related packages(which is required) and compile qt on the board. Which is exactly like compiling qt on the host. :)[/quote]

OK Thank you very much.
I'll try to install everything on my board (ubuntu 12.04) and copy that to my host PC.
And I think I would give 5.3.0 up because of the gstreamer option.
So let me confirm that,
now I need to run apt-get install on my target board to install all the package I need, and then I take copy the file system to my host, then in the path that I paste it, I untar the 5.1.1 package and copy the tool chain, then install the cross compiler according the blog right?
Thank you.

sakshi

yes... or the easier way copy your downloaded qt source on the target and compile :)

maatong

[quote author="sakshi" date="1398971770"]yes... or the easier way copy your downloaded qt source on the target and compile :)[/quote]

Hi I'm trying to build it now, and I'm at step four on your blog,
in qmake.conf, you wrote :ROOTFS=/tools/rootfs.
So /tools/rootfs is your directory of your file system right?
If I copyed my whole file system to the host in /home/myname/filesystem,
the my ROOTFS=/home/myname/filesystem right?
And in export command, the ${SYSROOT} is the same path right?
And these name need not to be the same as my target system right?
thank you.

maatong

Hi sakshi:
I now am running the configure by ./config.imx6
when I tried to run it, I got:

glib.cpp:44:18: fatal error: glib.h: No such file or directory
compilation terminated.
make: *** [glib.o] Error 1
Glib disabled.
Glib support cannot be enabled due to functionality tests!
Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.

But actually I did install the modules and libs that needed, And I can find glib.h in glib-2.0 directory under /usr/include.
And I've set the path PKG_CONFIG_SYSROOT_DIR, PKG_CONFIG_LIBDIR, and PKG_CONFIG_DIR like your blog, so did you meet this knid of problem before?
Thank you.

sakshi

1.did you install glib-dev (apt-get install glib-dev)?
2. Do you find glib-2.0.pc in your target file system?

maatong

[quote author="sakshi" date="1399006803"]1.did you install glib-dev (apt-get install glib-dev)?
2. Do you find glib-2.0.pc in your target file system?[/quote]

I installed libglib-2.0-dev.
And I didn't find glib-dev when I tried to search it.
And after installing that, I didn't find glib-2.0.pc in my /usr/include/pkgconfig.
So is there other dev I need to get that .pc file?
Thank you.
Sorry for troubling you with so many questions.

sakshi

i meant libglib-2.0-dev only.
just try to uninstall and install glib. May be it got missed during process.
******.pc is a package config file. if *.pc of any package is missing then you cannot enable the perticular package.

maatong

[quote author="sakshi" date="1399052319"]i meant libglib-2.0-dev only.
just try to uninstall and install glib. May be it got missed during process.
******.pc is a package config file. if *.pc of any package is missing then you cannot enable the perticular package.[/quote]

OK, I'm trying on it.
And about the qtmultimedia module, in 5.3.0 version, I make the module inside the ../qtmultimedia directory, and after that, I copied the .pri files to the modules and modules-inst folder in /qtbase/mkspecs/modules && modules-inst.
Is your process the same?
Thank you.

sakshi

No. With libglib-2.0-dev it shud have installed glib-2.0.pc. do
$cd /
$find ./ -name glib-2.0.pc

maatong

[quote author="sakshi" date="1399295058"]No. With libglib-2.0-dev it shud have installed glib-2.0.pc. do
$cd /
$find ./ -name glib-2.0.pc [/quote]

My system does have glib-2.0 directory, it came with the orginal system, but there's no glib-2.0.pc with it.
So I will unstall it and reinstall it.
Thank you for your help.
And is it possible to know what kind of developing board you're using now? My board is UDOO, so far there are not much resources about it.

And one more question, about this website:
https://community.freescale.com/docs/DOC-96390
Did you install LTIB like the website requires?
Thank you.

sakshi

about board mine is freescale imx6. after that i dont have any information about it.
Yes i have installed ltib.

sakshi

i meant libglib-2.0-dev. when you install libglib-2.0-dev it would have installed glib-2.0.pc. if it is not there in your entire file system then there is something wrong with your installation process.
Sorry for the late reply.

nintwala

is there a complete documentation on how to setup qtmultimedia for imx6qsabresd board? I was able to setup qt creator with the entire kit for the board and get a helloworld running, but I am assuming, I need to recompile everything to get qtmultimedia added again. Please point me in the right direction.