PostgreSQL and Trying to connect using Qt

nHx4U

" Check also whether libpq.dll has other dependencies not in PATH"

I don't know what this means - or how to check.

SGaist

libpq.dll is a dependency of Qt's psql plugin. But this dll might also depend on others. You can use Dependency Walker to check what are the dlls needed by libqp.dll

nHx4U

Well, I used Dependency Walker on LIBPQ.DLL in the Qt......plugins\sqldrivers\ folder. no dependencies showed up????

Now what can I do?

Thanks again.

mcosta

Hi,

you should check dependencies of libpq.dll installed with PostgreSQL.
Remenber that in Windows to load a DLL, it must be in the PATH.

nHx4U

Perhaps I don't know what I'm looking at in Dependency Walker. The yellow errors refer to files that are not even on my machine! I've attached a listing of the results. My PATH statement (in Windows Environment) now includes references to almost every Postgres and Qt directory on my drive.

API-MS-WIN-CORE-COM-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ERROR-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0.DLL
API-MS-WIN-CORE-WINRT-STRING-L1-1-0.DLL
API-MS-WIN-SHCORE-SCALING-L1-1-0.DLL

DCOMP.DLL
IESHIMS.DLL

Warning: At least one delay-load dependency module was not found.
Warning: At least one module has an unresolved import due to a missing export function in a delay-load dependent module.

I'm sure you can help. I'm just getting really frustrated about this!

Thanks.

Vinorcola

I've just got the same problem. When a driver is available but not loaded, it means there is a DLL missing. To solve that, you must have:

In Production:
In the same directory than your exe, you must have the libeay32.dll and the libpq.dll (You'll find them in the bin directory of postgres) and in the sqldrivers sub-directory, you must have qsqlpsql.dll.

In development:
In your build directory, you must put the libeay32.dll and the libpq.dll (in the same level than the Makefiles if you keep the default configuration).

This is for Windows 32bits (I can't realy tell for 64bits).

nHx4U

Thanks for your help.

I've tried your suggestion but still doesn't work.

I have Win7 x64. Maybe that's the problem.

Any other suggestions? I'll keep trying. Appreciate it.

aftertaf

I have the same problem, and same (absence of) experience with C++/QT.

I've tried all the google search results under the sun and no go either.
If you found anything, please say so :)

I'll post relevant stuff tomorrow on my exact issue (cos tonight the laptop is close to being thrown across the room . . . )

nHx4U

Hi aftertaf:

Nope! Still working on it. Appreciate your mutual frustration.
Hopefully, one of us will resolve the issue >>>>> SOON!

TheBadger

HI,

A quick check to see if it is a missing or unfound dll is to copy all of the content in the PostgreSQL lib folder into the folder of your exe. I know this is not the best solution, but you can sift out the ones not needed afterwards if you at least get it to work.
From my experience the following dlls are needed:

libeay32.dll
libiconv-2.dll
libintl-8.dll
libpq.dll
ssleay32.dll

I am not sure if it can be that the plugin is build for debug or release.

You are correct, the build command should be called from the command line:
@

mingw32-make
mingw32-make RELEASE
@

and then to install:

@

mingw32-make debug-install
mingw32-make release-install
@

The x64 should not be a problem if you use 32-bit PostgreSQL libs with 32-bit compile/Qt.

clochydd

Hi nHx4U, I work with PostgreSQL and Qt5,2 on Unix and Win7 64.
On Win7 I installed PSQL 32 and Qt 5.2 with mingw32. After setting up a 2nd Win7 machine I had similar problems as you have now.
Firstly they had been caused by an old PSQL 64 install, which had not completely been removed.
When removed and restarted, I still encountered the "QSqlDatabase: QPSQL driver not loaded" problem. After deleting all entries in the Application Build directory (Debug/Release) and building the project it works fine!

aftertaf

currently following this tuto:
http://qt-project.org/wiki/How-to-build-a-static-Qt-for-Windows-MinGW

I changed the powershell script to make it use QT 5.2.1, and for it to build some odbc & psql drivers (i think)

Get the Powershell script from there, read the tuto fully and do what is says, fully.......

I've changed these lines:
@78: $QtSrcUrl = "http://download.qt-project.org/official_releases/qt/5.2/5.2.1/single/qt-everywhere-opensource-src-5.2.1.7z",
169: -make libs -nomake tools -nomake examples -nomake tests -plugin-sql-odbc -plugin-sql-psql"@

I'll let you know about the outcome.
Anyone figures out what I'm doing and cares to give a pointer on how to get it working (tm) from my actions so far, or to correct me :), feel free...

aftertaf

i have :
c:\Qt with the binary installer version
c:\Qt\Static with the 'still compiling' static version (with the psql stuff I hope!!)

c:\PgSQl93_x86 with postgres 32bit & headers, libs, the whole installer package

Also have postgres 9.1 64bit (used for work).

Can someone, somewhere, write a step by step tutorial on how do to it, what prerequisites are what, which differences need which slightly different approach.... ?

clochydd

@aftertaf
Here's a short tutorial for Qt + PSQL:

Install Qt 5.2 32 from binary mingw32 "Qt 5.2.1 for Windows 32-bit (MinGW 4.8, OpenGL, 634 MB)"
Install Qt 5.2 Sorces
Install PostgreSQL 32-bit
Compile the QPSQL plugin

REM:
a. Check the PATH (mingw and postgresql\bin and lib)
b. I could not manage to have both PSQL 32 and 64 working together on one Win7 - only the 32-Bit works and it only worked after completely uninstalling PSQL 64 and build my own Qt-Applications completely new in a clean directory!

Hope this is useful for you

aftertaf

grrrrrrrrrrr

@xcopy /s /q /y /i C:\Qt\Static\src\qt-everywhere-opensource-src-5.2.1\qtbase\mks
pecs\winphone-arm-msvc2012 C:\Qt\Static\5.2.1\mkspecs\winphone-arm-msvc2012
2 File(s) copied
xcopy /s /q /y /i C:\Qt\Static\src\qt-everywhere-opensource-src-5.2.1\qtbase\mks
pecs\winphone-x86-msvc2012 C:\Qt\Static\5.2.1\mkspecs\winphone-x86-msvc2012
2 File(s) copied
xcopy /s /q /y /i C:\Qt\Static\src\qt-everywhere-opensource-src-5.2.1\qtbase\mks
pecs\winrt-arm-msvc2012 C:\Qt\Static\5.2.1\mkspecs\winrt-arm-msvc2012
2 File(s) copied
xcopy /s /q /y /i C:\Qt\Static\src\qt-everywhere-opensource-src-5.2.1\qtbase\mks
pecs\winrt-x64-msvc2012 C:\Qt\Static\5.2.1\mkspecs\winrt-x64-msvc2012
2 File(s) copied
xcopy /s /q /y /i C:\Qt\Static\src\qt-everywhere-opensource-src-5.2.1\qtbase\mks
pecs\winrt-x86-msvc2012 C:\Qt\Static\5.2.1\mkspecs\winrt-x86-msvc2012
2 File(s) copied
xcopy /s /q /y /i C:\Qt\Static\src\qt-everywhere-opensource-src-5.2.1\qtbase\doc
\global C:\Qt\Static\5.2.1\doc\global
58 File(s) copied
mingw32-make[1]: Target 'install' not remade because of errors.
mingw32-make[1]: Leaving directory 'C:/Qt/Static/src/qt-everywhere-opensource-sr
c-5.2.1/qtbase'
makefile:72: recipe for target 'module-qtbase-install_subtargets' failed
mingw32-make: *** [module-qtbase-install_subtargets] Error 2
mingw32-make: Target 'install' not remade because of errors.
Press Enter to continue...:@

aftertaf

[quote author="clochydd" date="1391800040"]aftertaf
Here's a short tutorial for Qt + PSQL:

Install Qt 5.2 32 from binary mingw32 "Qt 5.2.1 for Windows 32-bit (MinGW 4.8, OpenGL, 634 MB)"
Install Qt 5.2 Sorces [/quote]
-> during install of 'binary' in step above?,
-> as a tarball just uninflated somewhere 'clean'?
[quote]3. Install PostgreSQL 32-bit [/quote]
->ok, i'll switch now and completely purge x64 9.1 +9.3 from this system

[quote]4. Compile the QPSQL plugin [/quote]
@
include <n00b.h>
#IFNDEF compile, what do i do?
@
i.e. us n00bs, even if we've compiled kernels and broken our teeth on linux, we know how to speak PC in a broad sense, but this is a bit like reading 'the matrix' for us, and we ARE trying....

I've tried like 50 times to follow the QODBC & QPSQL stuff via google and qt project docs, and something (different every time) ain't working, and my n00bness combined with the fact i'm gutting my system of QT binary & source over and over means i dont understand and can't remember the errors i'm having.
I've been trying for the past 2 weeks in silence and solitude before bleeding out here...

[quote]REM:
a. Check the PATH (mingw and postgresql\bin and lib) [/quote]
->the SET PATH env variable , to be sure they're both in there for the system and for the cmd prompts i've been launching??
Yep.

[quote]b. I could not manage to have both PSQL 32 and 64 working together on one Win7 - only the 32-Bit works and it only worked after completely uninstalling PSQL 64 and build my own Qt-Applications completely new in a clean directory! [/quote]
OK, cleaning up (again), this time PGx64 too

[quote]Hope this is useful for you [/quote]
me too, will let you know :)

clochydd

@aftertaf: I have modified my tutorial so that now you will see all steps from downloading to building the plugins.
This is what I've done to make Qt 32-bit and PSQL 32-bit work on Win7 64-Bit:

Prepare compiling of the plugin (Lets assume we install Qt + Sources to C:\Qt, PostgresSQL to C:\Programs(86x)):
Download Qt 5.2.1 32-bit: http://download.qt-project.org/official_releases/qt/5.2/5.2.1/qt-opensource-windows-x86-mingw48_opengl-5.2.1.exe
Run the .exe, install to C:\Qt\Qt5.2.1
Download sources: http://download.qt-project.org/official_releases/qt/5.2/5.2.1/single/qt-everywhere-opensource-src-5.2.1.zip
Extract zip to C:\Qt\Qt5.2.1
Download PostGreSQL 32-bit: http://www.enterprisedb.com/postgresql-932-1-installers-win32?ls=Crossover&type=Crossover
Modify PATH:
set QTSDK_SQLDRIVERS_PATH=C:\Qt\Qt5.2.0\5.2.1\mingw48_32\plugins\sqldrivers
set QT_SRC_PATH=C:\Qt\Qt5.2.1\5.2.1\Src\qtbase
set POSTGRES32=C:\Progra~2\PostgreSQL\9.3 (USE Progra~2 FOR Programs(86x)!)
cd %QT_SRC_PATH%\src\plugins\sqldrivers\psql
add permanently to PATH (Control Panel): C:\Qt\Qt5.2.1\Tools\mingw48_32\bin
modify C:\Progra~2\PostgreSQL\9.3\include\pthread.h (multiple definitions of struct timespec):
replace: #ifndef HAVE_STRUCT_TIMESPEC
with: #if ((!defined(_TIMESPEC_DEFINED)) && (!defined(HAVE_STRUCT_TIMESPEC)))
start building the plugins:
C:\Qt\Qt5.2.0\5.2.0\mingw48_32\bin\qmake "INCLUDEPATH+=%POSTGRES32%\include" "LIBS+=%POSTGRES32%\lib\libpq.lib" psql.pro
mingw32-make debug
mingw32-make release
copy the newly created plugins to C:\Qt\Qt5.2.0\5.2.1\mingw48_32\plugins\sqldrivers:
copy release\libqsqlpsql.a %QTSDK_SQLDRIVERS_PATH%
copy release\qsqlpsql.dll %QTSDK_SQLDRIVERS_PATH%
copy debug\libqsqlpsqld.a %QTSDK_SQLDRIVERS_PATH%
copy debug\qsqlpsqld.dll %QTSDK_SQLDRIVERS_PATH%

aftertaf

1: Thanks for taking time out :)
2: OK, i've just reviewed and adapted to my environment slightly

I get this error:
@g++ -c -pipe -fno-keep-inline-dllexport -g -std=c++0x -fno-exceptions -frtti -Wall -Wextra -DUNICODE -DQT_NO_CAST_TO_ASCII -DQT_NO_CAST_FROM_ASCII -DQT_NO_EXCEPTIONS -DQT_PLUGIN -DQT_SQL_LIB -DQT_CORE_LIB -I. -I"C:\Qt\5.2.1\mingw48_32\include\QtSql\5.2.1" -I"C:\Qt\5.2.1\mingw48_32\include\QtSql\5.2.1\QtSql" -I"C:\Qt\5.2.1\mingw48_32\include" -I"C:\Qt\5.2.1\mingw48_32\include\QtSql" -I"C:\Qt\5.2.1\mingw48_32\include\QtCore\5.2.1" -I"C:\Qt\5.2.1\mingw48_32\include\QtCore\5.2.1\QtCore" -I"C:\Qt\5.2.1\mingw48_32\include\QtCore" -I".moc\debug" -I"........\mkspecs\win32-g++" -o .obj\debug\qsql_psql.o ......\sql\drivers\psql\qsql_psql.cpp
......\sql\drivers\psql\qsql_psql.cpp:59:22: fatal error: libpq-fe.h: No suchfile or directory
#include <libpq-fe.h>
^
compilation terminated.
Makefile.Debug:497: recipe for target '.obj/debug/qsql_psql.o' failed
mingw32-make[1]: *** [.obj/debug/qsql_psql.o] Error 1
mingw32-make[1]: Leaving directory 'c:/QT/5.2.1/Src/qtbase/src/plugins/sqldrivers/psql'
makefile:48: recipe for target 'debug' failed
mingw32-make: *** [debug] Error 2@

my path & env.vars set in the dos prompt:(which matches, i have triple checked)
set QTSDK_SQLDRIVERS_PATH=C:\QT\5.2.1\mingw48_32\plugins\sqldrivers
set QT_SRC_PATH=c:\QT\5.2.1\Src\qtbase
set POSTGRES32=c:\psql93_x86

C:\Qt\5.2.1\mingw48_32\bin;C:\Qt\Tools\mingw48_32\bin;C:\Qt\Tools\QtCreator\bin;C:\psql93_x86\bin;C:\psql93_x86\lib;C:\psql93_x86\include;C:\psql93_x86\include\libpq;C:\Perl\site\bin;C:\Perl\bin;C:\Windows;C:\Windows\system32;C:\Windows\System32\WindowsPowerShell\v1.0\C:\Windows\System32\Wbem;C:\trace;C:\trace\dll;c\trace\prod;C:\windev55;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn;c:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files\doxygen\bin

aftertaf

Forum post typo:
i do have libpq-fe.h in c:\psql93_x86\include\ (not c:\pgsql93_x86\include)
20.5k, dated 3rd Dec 2013

clochydd

But c:\pgsql93_86\include\ is not in the maker's includepath
See my suggestion item 11.:
[11. start building the plugins:
C:\Qt\Qt5.2.0\5.2.0\mingw48_32\bin\qmake “INCLUDEPATH+=%POSTGRES32%\include” “LIBS+=%POSTGRES32%\lib\libpq.lib” psql.pro]
good luck!