[SOLVED]Trying to build mysql driver in Qt 5.1.0 and MySQL 5.6

koresaram777

[quote author="SGaist" date="1373404293"]Hi and welcome to devnet,

You should found them under qtbase/src/plugins/sqldrivers/mysql/[/quote]

thanks! i have found them but i don’t have mysql.pro file, and what should it contain?

SGaist

Are you sure you have the sources installed ?

francescmm

Hi!

As SGalst has said you is that you must download the Qt sources. In addition, you must download the source code of MySQL from its webpage.

The next step is to open the mysql.pro, add the following lines:

@LIBS += mysql/path/lib/libmysql.lib
INCLUDEPATH += mysql/path/include@

Then, you onyle have to compile in debug mode and in release mode. It provide you two files (I don't remember the exactly name) in both cases: [libqsqlmysqld.a, qsqlmysqld.dll] and [libqsqlmysql.a, qsqlmysql4.dll].

You have to copy them into the sqldrivers dir of Qt non-source path.

SGaist

Little correction, you don't need the MySQL sources, the standard package should contain the libs and includes.

francescmm

Thanks you! :)

koresaram777

[quote author="francescmm" date="1373443489"]Hi!

As SGalst has said you is that you must download the Qt sources. In addition, you must download the source code of MySQL from its webpage.

The next step is to open the mysql.pro, add the following lines:

@LIBS += mysql/path/lib/libmysql.lib
INCLUDEPATH += mysql/path/include@

Then, you onyle have to compile in debug mode and in release mode. It provide you two files (I don't remember the exactly name) in both cases: [libqsqlmysqld.a, qsqlmysqld.dll] and [libqsqlmysql.a, qsqlmysql4.dll].

You have to copy them into the sqldrivers dir of Qt non-source path.[/quote]

when i am trying to make a mysql.pro by command "mingw32-make" it show me a lot of mistakes like: undefined reference to 'mysql_num_rows@4' and something like that.

after all it says:
c:/qt/qt5.1.0/tools/mingw48_32/bin/../lib/gcc/i686-w64-mingw32/4.8.0/../../../../i686-w64-mingw32/bin/ld.exe: .obj/release_shared/qsql_mysql.o: bad reloc address 0x4 in section `.data'
collect2.exe: error: ld returned 1 exit status
Makefile.Release:80: recipe for target '........\plugins\sqldrivers\qsqlmysql.dll' failed
mingw32-make[1]: *** [........\plugins\sqldrivers\qsqlmysql.dll] Error 1
mingw32-make[1]: Leaving directory 'C:/Qt/Qt5.1.0/5.1.0/Src/qtbase/src/plugins/sqldrivers/mysql'
makefile:38: recipe for target 'release-all' failed
mingw32-make: *** [release-all] Error 2

francescmm

It is because the folder you are including in both INCLUDEPATH and LIBS have not the necessary CPP files. Are you sure you have all the sources?

Try downloading: "MySQL Connector":http://dev.mysql.com/downloads/connector/c/

koresaram777

[quote author="francescmm" date="1373465557"]It is because the folder you are including in both INCLUDEPATH and LIBS have not the necessary CPP files. Are you sure you have all the sources?

Try downloading: "MySQL Connector":http://dev.mysql.com/downloads/connector/c/[/quote]

yes, I am sure that i have all sources, should I setup environment variables???
may be it is because i have win8 x64 but my mingw x32 and qt5.1.0 x32???

koresaram777

Thanks very much everybody! The problem is solved :)

SGaist

Great !

Then don't forget to update the thread's title to solved, so other forum users may know a solution has been found :)

Vinorcola

Hello,

It would have been nice to tell us how you solved your problem koresaram777.

Indeed, I follow every indication, download the C connector sources archives and then the C++ one, but still, I can't compile the plugin. There is no C++ file into those archive (only headers files).

I did some research but every time I have got a topic that says a different way. And I always still have those error messages:

undefined references to mysql_num_rows@4, mysql_stmt_num_rows@4, etc.

My computer is a 32bits so I only used (and download) the tools for 32bits. I say that because main of forum topic says that the problème come when using 64bits sources when the installed version of MySQL is 32bits.

If someone can help me. Thanks.

koresaram777

[quote author="Vinorcola" date="1380787942"]Hello,

It would have been nice to tell us how you solved your problem koresaram777.

Indeed, I follow every indication, download the C connector sources archives and then the C++ one, but still, I can't compile the plugin. There is no C++ file into those archive (only headers files).

I did some research but every time I have got a topic that says a different way. And I always still have those error messages:

undefined references to mysql_num_rows@4, mysql_stmt_num_rows@4, etc.

My computer is a 32bits so I only used (and download) the tools for 32bits. I say that because main of forum topic says that the problème come when using 64bits sources when the installed version of MySQL is 32bits.

If someone can help me. Thanks.[/quote]

when you download the c connector, you need to install it, after installation create the empty folder in c disk, after this just copy all you files from C:\Program Files\MySQL\Connector C++\ to your new folder, and rename this folder for example mySQL, but do it without spaces. and aflter that when you compile reference to that folder which you created before and that's all :)

Vinorcola

I did what you said, but have still have the same error. Can someone help me? Or send me the compile plugin?

Thanks

koresaram777

[quote author="Vinorcola" date="1380803548"]I did what you said, but have still have the same error. Can someone help me? Or send me the compile plugin?

Thanks[/quote]

give your email and what qt version do you have?

Kerox3562

Hi,

I've got some problems to compile Mysql driver, is something obvious for you ?

@cd C:\Qt\Qt5.1.1\5.1.1\Src\qtbase\src\plugins\sqldrivers\mysql

set mysql="C:\\PROGRA~1\\MySQL\\MYSQLS~1.6"

qmake "INCLUDEPATH+=%mysql%\include\" "LIBS += -L %mysql%\lib\libmysql.lib" -o Makefile mysql.pro

mingw32-make@

@g++ -Wl,-s -shared -Wl,--out-implib,C:\Qt\Qt5.1.1\5.1.1\Src\qtbase\plugins\sqldr
ivers\libqsqlmysql.a -o ........\plugins\sqldrivers\qsqlmysql.dll .obj/releas
e_shared/main.o .obj/release_shared/qsql_mysql.o .obj/release_shared/moc_qsql_my
sql_p.o -llibmysql -LC:\Qt\Qt5.1.1\5.1.1\mingw48_32\lib -lQt5Sql -lQt5Core
c:/qt/qt5.1.1/tools/mingw48_32/bin/../lib/gcc/i686-w64-mingw32/4.8.0/../../../..
/i686-w64-mingw32/bin/ld.exe: cannot find -llibmysql
collect2.exe: error: ld returned 1 exit status
Makefile.Release:80: recipe for target '........\plugins\sqldrivers\qsqlmysql
.dll' failed
mingw32-make[1]: *** [........\plugins\sqldrivers\qsqlmysql.dll] Error 1
mingw32-make[1]: Leaving directory 'C:/Qt/Qt5.1.1/5.1.1/Src/qtbase/src/plugins/s
qldrivers/mysql'
makefile:38: recipe for target 'release-all' failed
mingw32-make: *** [release-all] Error 2@

SGaist

@ "LIBS += -L %mysql%\lib\libmysql.lib"@

That's your problem, -L is to give a path not a library name

morker

Thanks for your post's!

I got an issue if I want to build my driver. I'm using qt 5.3 and mysql 5.6 (mysql-5.6.20-win32).

I added mysql.pro to qt creator and add the following two lines to the .pro file:

@
LIBS += C:/mysql/mysql-5.6.20-win32lib/libmysql.lib
INCLUDEPATH += C:/mysql/mysql-5.6.20-win32/include
@

I got the following errors if i want to compile the mysql project:

C:\mysql\mysql-5.6.20-win32\include\mysql_com.h:320: error: C2146: Syntaxfehler: Fehlendes ';' vor Bezeichner 'fd'

C:\mysql\mysql-5.6.20-win32\include\mysql_com.h:320: error: C4430: Fehlender Typspezifizierer - int wird angenommen. Hinweis: "default-int" wird von C++ nicht untersttzt.

C:\mysql\mysql-5.6.20-win32\include\mysql_com.h:320: error: C2146: Syntaxfehler: Fehlendes ';' vor Bezeichner 'fd'

C:\mysql\mysql-5.6.20-win32\include\mysql_com.h:320: error: C4430: Fehlender Typspezifizierer - int wird angenommen. Hinweis: "default-int" wird von C++ nicht untersttzt.

C:\work\build\qt5\qtbase\src\sql\drivers\mysql\qsql_mysql.cpp:44: error: C1083: Datei (Include) kann nicht ge”ffnet werden: "QtSql/private/qsqldriver_p.h": No such file or directory

Many thanks for your help!

SGaist

Hi and welcome to devnet,

Did you first build Qt 5 yourself ?

morker

Hi SGaist,

yes I built qt5 by my self. I also tried to build the drivers with the following commands (see http://qt-project.org/doc/qt-4.8/sql-driver.html#how-to-build-the-qmysql-plugin-on-windows):

cd C:\work\build\qt5\qtbase\src\plugins\sqldrivers\mysql

qmake "INCLUDEPATH+=C:\mysql\mysql-5.6.20-win32\include" "LIBS+=C:\mysql\mysql-5.6.20-win32\lib\libmysql.lib" mysql.pro

mingw32-make

If I do the "mingw32-make" command I got the following errors:

C:\work\build\qt5\qtbase\src\plugins\sqldrivers\mysql>mingw32-make
mingw32-make -f Makefile.Release all
mingw32-make[1]: Entering directory 'C:/work/build/qt5/qtbase/src/plugins/sqldri
vers/mysql'
Makefile.Release:65: *** missing separator. Stop.
mingw32-make[1]: Leaving directory 'C:/work/build/qt5/qtbase/src/plugins/sqldriv
ers/mysql'
mingw32-make[1]: Leaving directory 'C:/work/build/qt5/qtbase/src/plugins/sqldriv
ers/mysql'
Makefile:40: recipe for target 'release-all' failed
mingw32-make: *** [release-all] Error 2

SGaist

You're on windows either escape the backslashes or since you are using Qt use the unix notation i.e. forward slashes