Problem Qt-Embedded / PandaBoard

[A Former User]

I compile Qt-embedded with this command :
./configure -embedded arm -xplatform qws/linux-arm-gnueabihf-g++/ -little-endian -qvfb -lrt -qt-gfx-linuxfb -qt-gfx-qvfb

and make -j2 then sudo make install

I add the new qmake in Qtcreator to compile programs.

My qmake.conf is like this :
@

qmake configuration for building with arm-linux-gnueabi-g++

include(../../common/linux.conf)
include(../../common/gcc-base-unix.conf)
include(../../common/g++-unix.conf)
include(../../common/qws.conf)

modifications to g++.conf

QMAKE_CC = arm-linux-gnueabi-gcc-4.6
QMAKE_CXX = arm-linux-gnueabi-g++-4.6
QMAKE_LINK = arm-linux-gnueabi-g++-4.6
QMAKE_LINK_SHLIB = arm-linux-gnueabi-g++-4.6

modifications to linux.conf

QMAKE_AR = arm-linux-gnueabi-ar cqs
QMAKE_OBJCOPY = arm-linux-gnueabi-objcopy
QMAKE_STRIP = arm-linux-gnueabi-strip

load(qt_config)
@
During the compilation of Qt embedded I had errors but I fixed them with solutions I found on the web.

[Edit: Added @ tags -- mlong]

[luca]

Ok,
are you using Qt Creator to build you application?
Have you added the new Qt building tu Qt Creator settings?

[A Former User]

Yes I did ! I have any error after building it

[luca]

can you post the result of:
@
ls -la
@
in the folder where you have the built executable?

[A Former User]

@ls -la
total 224
drwxrwxr-x 3 linaro linaro 4096 Oct 9 08:24 .
drwxr-xr-x 10 linaro linaro 4096 Oct 9 08:24 ..
-rw-r--r-- 1 linaro linaro 14365 Sep 11 03:36 example.html
drwxrwxr-x 4 linaro linaro 4096 Oct 9 08:24 images
-rw-r--r-- 1 linaro linaro 1930 Sep 11 03:36 main.cpp
-rwxrwxrwx 1 linaro linaro 108964 Oct 8 15:50 textedit
-rw-r--r-- 1 linaro linaro 24236 Sep 11 03:36 textedit.cpp
-rw-r--r-- 1 linaro linaro 3690 Sep 11 03:36 textedit.h
-rw-r--r-- 1 linaro linaro 535 Oct 9 2012 textedit.pro
-rw-r--r-- 1 linaro linaro 45701 Oct 9 2012 textedit.pro.user
-rw-r--r-- 1 linaro linaro 1634 Sep 11 03:36 textedit.qrc@

I did a chmod 777 textedit to change the rights of the appli.

[luca]

Ok, now you are on a Linux PC I suppose, so you need to transfer the executable in the target board and try to execute it.

Have you also copied the built libraries on the target board?

[A Former User]

My ls -la command was from my Pandaboard.
I transfererd my executable in my PandaBoard, and copied the built librairies. I changed my $PATH but I still have

@bash : ./textedit : No such file or directory@

Did I make something wrong?

[luca]

If you ls is from pandaboard, why did you copy you Qt project and not only the executable?
Are you cross-compiling or building directly on the board?

[A Former User]

I copied the project because the executable need images included in the folder. I cross compile, I don't build from the board!

[A Former User]

The version of cross-compiler is not suitable.
You should use arm-linux-gnueabihf-g++

[A Former User]

Nadroj: I'm trying to compile qt-everywhere-opensource-src-4.8.5 but I had errors running the ./configure. In your post you say you correct the errors, could you tell me how? Thank's.