Qt Programming Language

Allanis

Hi, you will need to create a .pro file which gives instructions on how to build your application. http://doc.qt.io/qt-4.8/qmake-project-files.html

Once you have have this. you can do as instructed by @sierdzio in CMD.

Allanis

@Annabelle Sorry, I was at work when I made my initial response to this thread. A more elaborate answer for you follows as I take it you are beginning in Qt and it may be difficult for you to look up resources.

Given the scope of your project I think it will suffice to use a simple Qmake project file such as:

myapp.pro

TEMPLATE = app

QT += widgets

SOURCES += main.cpp \
    MainWindow.cpp \
    SpouseWidget.cpp

HEADERS += \
    MainWindow.h \
    SpouswWidget.h

OTHER_FILES += \
    anyotherfile.png

You may need to make changes to this in order to fit the needs of your project, but this should be a good enough example for you.

Once you have this in place, you can open up your favorite Command Line Interface (eg. cmd.exe for Windows).

Type:

qmake myapp.pro
make

Your compiler will generate a binary file for your application at this point.

I hope this helps,
Have fun.

Annabelle

Another thing I'd like to do is make icons for the push buttons, radio buttons, combo boxes, and checkboxes. I'd like to find out, is it OK for me to use unicode symbols as icons? For example:
In the welcome screen, there are the following Radio Buttons
⚭ (Wedding Ceremony Radio Button)
~⛲ (Baptism Ceremony Radio Button)
⛼ (Funeral Ceremony Radio Button)
For the Spouse Genders, there should be the following Icons:
👰 (Bride Radio Button)
🤵 (Groom Radio Button)
For the Baptism Person Types, there should be the following Icons:
👦👶👧 (Infant Radio Button)
👦👧 (Child Radio Button)
👦👨👧👩 (Youth Radio Button)
👨👴👩👵 (Adult Radio Button)
For the Funeral Ceremony Types, there should be the following icons:
⚰ (Funeral Radio Button)
⚱ (Memorial Service Radio Button)
Note that some of the icons are composed of two or more unicode characters put together, as I couldn't find separate unicode symbols to represent them.

Allanis

You should be able to use QString::fromUtf8() for this: http://doc.qt.io/qt-5/qstring.html#fromUtf8

Annabelle

@Allanis said in Qt Programming Language:

You should be able to use QString::fromUtf8() for this: http://doc.qt.io/qt-5/qstring.html#fromUtf8

Could you please be so kind as to give me an example of what one of my icons would look like with the QString::fromUtf8() code? For example: 👦👶👧

Allanis

Sure. I'm not sure exactly what you mean. Do you want an image or a code example? either way I whipped up a quick example to demonstrate what it would look like. Here's an image.

Given that your first post mentioned you where visually impaired, I think I may have misunderstood your meaning, so here's an example in code:

  QRadioButton* rb = new QRadioButton();
  QString str = QString::fromUtf8("<Utf-8 code> Button Name");
  rb->setText(str);

Where <Utf-8 code> = the character you wish to display.
Pretty sure there is a nicer way to do it. But I'm off to bed. That should get you started though.

Annabelle

@Allanis said in Qt Programming Language:

Sure. I'm not sure exactly what you mean. Do you want an image or a code example? either way I whipped up a quick example to demonstrate what it would look like. Here's an image.

Given that your first post mentioned you where visually impaired, I think I may have misunderstood your meaning, so here's an example in code:
  QRadioButton* rb = new QRadioButton();
  QString str = QString::fromUtf8("<Utf-8 code> Button Name");
  rb->setText(str);
Where <Utf-8 code> = the character you wish to display.
Pretty sure there is a nicer way to do it. But I'm off to bed. That should get you started though.

So are you thinking I should write something like:
QRadioButton* rb = new QRadioButton();
QString str = QString::fromUtf8("<👰> Button Name");
rb->setText(str);
And for "Button Name", would it be something like:
QRadioButton* rb = new QRadioButton();
QString str = QString::fromUtf8("<👰> Bride");
rb->setText(str);
Something along those lines?

Allanis

Yeah that will work. But remove the <> from around your unicode character. I only placed them their as placeholder. It will work by placing the unicode character in your source file as you have done, but I would recommend finding the value for it instead. I'm replying from my phone so I can't look ot up for you.

Annabelle

@Allanis said in Qt Programming Language:

Yeah that will work. But remove the <> from around your unicode character. I only placed them their as placeholder. It will work by placing the unicode character in your source file as you have done, but I would recommend finding the value for it instead. I'm replying from my phone so I can't look ot up for you.

@Allanis said in Qt Programming Language:

Yeah that will work. But remove the <> from around your unicode character. I only placed them their as placeholder. It will work by placing the unicode character in your source file as you have done, but I would recommend finding the value for it instead. I'm replying from my phone so I can't look ot up for you.

By value, do you mean the Unicode value? Or do you mean the hexidecimal value? I'm confused!

Allanis

@Annabelle said in Qt Programming Language:

👰

Sorry, I wasn't too clear. You should use the UCN for example: '\u2639' will represent ☹
There can be problems with this as compilers are required to support only the basic source characters. I'm not sure if Qt gives you much help in way of UCN's so if it doesn't display the character for you, use the literal '☹' in your source, and perhaps see if someone else can help you with the use of UCN as I'm not so sure without reading up on it. Perhaps also try reading up on character sets to understand encodings.

Edit:
I just checked up the code for 👧

  QString str1 = QString::fromUtf8("\U0001F467 Button 1");

Annabelle

@Allanis said in Qt Programming Language:

@Annabelle said in Qt Programming Language:

👰

Sorry, I wasn't too clear. You should use the UCN for example: '\u2639' will represent ☹
There can be problems with this as compilers are required to support only the basic source characters. I'm not sure if Qt gives you much help in way of UCN's so if it doesn't display the character for you, use the literal '☹' in your source, and perhaps see if someone else can help you with the use of UCN as I'm not so sure without reading up on it. Perhaps also try reading up on character sets to understand encodings.

Edit:
I just checked up the code for 👧
  QString str1 = QString::fromUtf8("\U0001F467 Button 1");

So for Bride:

QString str1 = QString::fromUtf8("\U0001F470 Button 1");
-> Set Text = "Bride";

Allanis

@Annabelle said in Qt Programming Language:

\U0001F470

That's right. You've got it.

Annabelle

@Allanis said in Qt Programming Language:

@Annabelle said in Qt Programming Language:

\U0001F470

That's right. You've got it.

So would this look right?

QString str1 = QString::fromUtf8("\U0001F470 Button 1");
-> Set Text = "Bride";
Not quite sure how to do the "Set Text" part, so I did the best I could when writing the code. So how would I compile the full version of the radio button? Would it look something like this?
QRadioButton *button = new QRadioButton ("Bride", this);
QString str1 = QString::fromUtf8("\U0001F470 Button 1");
-> Set Text = "Bride";

Allanis

QRadioButton* button = new QRadioButton();
QString str1 = QString::fromUtf8("\U0001F470 Bride");
button->setText(str1);

I would suggest reading a book to get yourself better acquainted with C++. Otherwise you will encounter many pitfalls.

Annabelle

@Allanis said in Qt Programming Language:

QRadioButton* button = new QRadioButton();
QString str1 = QString::fromUtf8("\U0001F470 Bride");
button->setText(str1);
I would suggest reading a book to get yourself better acquainted with C++. Otherwise you will encounter many pitfalls.

Are there any books out there that are available in Braille? Since that's the primary format which I read. If that's not possible, is there a .chm help file that can explain the language in detail?

Allanis

It may be difficult to find such a technical book in Braille. I had a look but came up empty. You can find a copy of "C++ gui programming with qt4 2nd edition" in .chm.

https://github.com/sherlock/qt?files=1

I think your screen reader should be ok to read epub? If so you could pickup most textbooks from amazon or something.

Annabelle

@Allanis said in Qt Programming Language:

It may be difficult to find such a technical book in Braille. I had a look but came up empty. You can find a copy of "C++ gui programming with qt4 2nd edition" in .chm.

https://github.com/sherlock/qt?files=1

I think your screen reader should be ok to read epub? If so you could pickup most textbooks from amazon or something.

I tried searching for the .chm file "C++ gui programming with qt4 2nd
edition" on the link you provided, but it says "No Matching Files Found". Where do I go next?

mrjj

@Annabelle
Hi, it is hidden inside a download button
this is direct link
https://github.com/sherlock/qt/raw/master/C%2B%2B GUI Programming with Qt4 2ndEdition.chm

Annabelle

@mrjj said in Qt Programming Language:

@Annabelle
Hi, it is hidden inside a download button
this is direct link
https://github.com/sherlock/qt/raw/master/C%2B%2B GUI Programming with Qt4 2ndEdition.chm

I downloaded the .chm file, but now when I attempt to read any of the topics, it seems there's nothing in them. Is there something wrong with the file?

mrjj

@Annabelle
Hi
Yes it seems that at least on windows 10, only the toc is there -
nothing is shown when you click on a topic.

If pdf is ok, here is direct link
https://tfetimes.com/wp-content/uploads/2015/09/c-gui-programming-with-qt-4-2ndedition.pdf