Issues compiling c files in Qt creator
-
Why a base64 library? Qt can de/encode base64 all by itself (QByteArray::fromBase64 and toBase64).
-
You can add it as custom target to PRE_TARGETDEPS variable I think.
-
[quote author="Tobias Hunger" date="1291577543"]Why a base64 library? Qt can de/encode base64 all by itself (QByteArray::fromBase64 and toBase64).[/quote]
Hi Toby,
Thanks for the reply, that class is part of the source of a library that I am trying to use. It builds fine when running a normal gcc session from the command line so I was a bit surprised when I run into the issue. I'm not a c++ expert by any stretch ,just learning as I go along, but if I understand what you are suggesting it means that I have to go through the whole library replacing the instances of base64 calls with the QByteArray calls, and I don't know how that will affect the rest of the library which was why I wanted to see if there was something I should be doing instead.Thanks again
-
[quote author="Denis Kormalev" date="1291577718"]You can add it as custom target to PRE_TARGETDEPS variable I think.
[/quote]Thanks for that Denis, will try that right away and let you know how it goes.
-
benardmens: Oh, if this is part of 3rd party code then forget my comment.
Many people seem to not know that Qt can de/encode base64 all by itself... I have seen more than one piece of code where some developer dragged in a 3rd party library just to write some bytes in base64 encoding.
-
[quote author="Denis Kormalev" date="1291577718"]You can add it as custom target to PRE_TARGETDEPS variable I think.
[/quote]Hi Denis, tried that but it didn't work. The way I understood it is to add a custom Makefile argument to the PRE_TARGETDEPS? Thanks
[edit: quoe fixed / Denis Kormalev]
-
[quote author="Volker" date="1291582514"]Unfortunately I cannot download the files (too many downloads in parallel). So, sorry, can't help with this.[/quote]
Hi Volker,
These are some new links which shouldnt give the same problem,http://www.mediafire.com/?z13ki4t48iqs8ke
http://www.mediafire.com/?nq14e8527bj4l7i
http://www.mediafire.com/?1a23rh9ngxpe3dmI would appreciate any help as I've been trying to get this working for a day now. Thanks again
-
benardmens, can you show your .pro file (please post its content here in @ tags)?
-
[quote author="Denis Kormalev" date="1291620464"]benardmens, can you show your .pro file (please post its content here in (at) tags)?[/quote]
Hi Denis,
I just got a work around to work by building it as a library and adding it manually to the libs. However , i would still like to be able to understand how to do it properly if possible.The current .pro file is below as requested
@
#-------------------------------------------------Project created by QtCreator 2010-12-05T20:36:45
#-------------------------------------------------
QT += core gui
TARGET = PolicyFrameworkSpy
TEMPLATE = appunix:LIBS +=-L/usr/include/libxml2
/usr/local/lib/libhaggle.aunix:INCLUDEPATH +=/usr/local/include/libhaggle/
/usr/include/libxml2 \QMAKE_CFLAGS_DEBUG += -std=gnu99 -O2
QMAKE_LFLAGS += -lxml2 -lz -lpthread -licucore -lm
SOURCES += main.cpp
PolicyFramework.cppHEADERS += PolicyFramework.h
FORMS += PolicyFramework.ui
@And the one I was having issues with
@
#-------------------------------------------------Project created by QtCreator 2010-12-05T16:43:38
#-------------------------------------------------
QT += core gui
TARGET = PolicyFrameworkDesktop
TEMPLATE = appINCLUDEPATH +=/QTDev/PolicyFrameworkDesktop/libhaggle
SOURCES += main.cpp
PolicyFrameworkSpy.cpp
libhaggle/base64.cHEADERS += PolicyFrameworkSpy.h
libhaggle/base64.hFORMS += PolicyFrameworkSpy.ui
@ -
[quote author="xsacha" date="1291620625"]You could put the files inside a zip or tar. Makes it easier to upload and download (for future reference).
Theres a site called wikiupload that doesn't have a time delay to download.[/quote]
Thanks for that, I will keep that in mind for later. Thanks for the help everyone. This is one of the most responsive forums I've ever been on!
-
benardmens, try to add something like this
@
someLib.target = someLibBuild
someLib.commands = cd path/to/lib && make
QMAKE_EXTRA_TARGETS += someLib
PRE_TARGETDEPS += someLibBuild
@ -
[quote author="benardmens" date="1291619302"]
These are some new links which shouldnt give the same problem,I would appreciate any help as I've been trying to get this working for a day now. Thanks again[/quote]
I put base64.h and and base64.c in a small project and could compile it and use its base64_encode_alloc in a C++ program.
qmake calls g++ or gcc depending on the file extension (cpp or c). I used no pre targets or libs or something like that.
-
Hi all,
1st thing is that you are not using class. There is no such thing in C as class or object!
Your problem is that you're using qt tools to compile (.pro file & qmake) which generate Makefiles only for C++. If you want to compile C code with QtCreator you should start using "cmake":http://cmake.org/ (which is supported by QtCreator) instead of .pro files. -
Not quite true.
@
HEADERS += plain.h base64.h
SOURCES += main.cpp base64.c
@This calls g++ (GCC in C++ mode) on main.cpp and gcc (GCC in C mode) on base64.c. The decision is made on the file extension (.cpp or .c). One can tweak that with setting QMAKE_EXT_CPP. The default is .cpp .cc .cxx .C
-
Actually, there's an even better way:
Top-level .pro file:
@
TEMPLATE = subdirssomeLib.subdir = someLib
someLib.makefile = someLib.mak # This may not be named "Makefile"!
someLib.target = $${QMAKE_PREFIX_SHLIB}someLib.${QMAKE_EXTENSION_SHLIB}SUBDIRS = someLib someApp
@someLib/someLib.mak:
@
libsomeLib.so:
gcc foo.c -o libsomeLib.soclean:
rm -f libsomeLib.sodistclean: clean
.PHONY: clean distclean
@Note that it will create a bogus, non-functional "someLib/Makefile", but you may simply ignore it.
I don't believe this is documented, but it's been in qmake for quite a long time (I want to say at least since 4.3.x, but don't quote me on that).
-
[quote author="GordonSchumacher" date="1291831448"]Actually, there's an even better way:
Top-level .pro file:
@
TEMPLATE = subdirssomeLib.subdir = someLib
someLib.makefile = someLib.mak # This may not be named "Makefile"!
someLib.target = $${QMAKE_PREFIX_SHLIB}someLib.${QMAKE_EXTENSION_SHLIB}SUBDIRS = someLib someApp
@someLib/someLib.mak:
@
libsomeLib.so:
gcc foo.c -o libsomeLib.soclean:
rm -f libsomeLib.sodistclean: clean
.PHONY: clean distclean
@Note that it will create a bogus, non-functional "someLib/Makefile", but you may simply ignore it.
I don't believe this is documented, but it's been in qmake for quite a long time (I want to say at least since 4.3.x, but don't quote me on that).[/quote]
[quote author="Volker" date="1291641995"]Not quite true.
@
HEADERS += plain.h base64.h
SOURCES += main.cpp base64.c
@This calls g++ (GCC in C++ mode) on main.cpp and gcc (GCC in C mode) on base64.c. The decision is made on the file extension (.cpp or .c). One can tweak that with setting QMAKE_EXT_CPP. The default is .cpp .cc .cxx .C[/quote]
Thanks for all the suggestions, I was unable to go back to the project because of work but I will try the suggestions right away and get back to you.
Thanks everyone!
-
Hi all,
I've tried the options without success so I've uploaded the project if some one could kindly help me out with where I'm going wrong. The link is below
http://www.wikiupload.com/3XHWP6JG2GXMU1D
Thanks again everyone for the help so far
-
Is that really all of libhaggle? There is no Makefile in that directory, but there is Makefile.in/.ac, which would certainly suggest that it's an Autotools project... but there is no Autoconf.in/.ac, so I can't run automake at all (or at least, mine complains about the lack of those files).