Set background color to a cell of a tableView
-
Thanks for your help. What would be the best way to pass the m_maxRow variable to the MyProxyModel class? The two options I can think are, create a global variable (usually considered bad) or create a signal/slot to pass the variable? I tried to pass it via a signal/slot and my class declaration is not working correctly. In my mainclass.h I have:
@#include "myproxymodel.h"
class MyProxyModel;@in my mainclass.cpp I have:
@void MainClass::colorCells()
{
float lowSales=99999999;
float highSales=0;
int rowLow=0;
int rowHigh=0;
int totalRows = 0;MyProxyModel myProxyModel; //error here
connect(this,SIGNAL(sendRows(int, int)),
&myProxyModel, SLOT(getRows(int, int))); //to pass the high and low salesint numRows =ui->printView->model()->rowCount();
for (int r=0; r<numRows; r++ )
{
if (ui->printView->isRowHidden(r))
continue;
float currentSales = ui->printView->model()->index(r,32).data(Qt::DisplayRole).toFloat();
if (currentSales <lowSales)
{
lowSales = currentRunTime;
rowLow = r;
}
if (currentSales > highSales)
{
highSales = currentSales;
rowhigh = r;
}
totalRows++;
totalTime += currentRunTime;
}emit sendRows (rowSlow, rowFast);
QModelIndex modelIdx = printModel->index(rowFast,32, QModelIndex());
printModel->data(modelIdx, Qt::BackgroundRole);//Is this correct implementation?
@
where I try to declare the MyProxyModel variable I get the error:
no matching function for call to 'MyProxyModel::MyProxyModel()'
candidates are: MyProxyModel::MyProxyModel(QObject*)
MyProxyModel::MyProxyModel(const MyProxyModel&)
I don't see why it thinks I am trying to declare a function.
I keep reading, trying to keep from asking questions here but I keep coming back!
Again, I appreciate your patience with my questions. -
Don't create your proxy model on the stack, create it on the heap with a proper parent. Otherwise, it will be deleted as soon as the method finishes (so before a result is even drawn). What's more, the code as you wrote it now can only be run once. Otherwise, you'll keep creating more proxy models. That can't be what you want. You also don't set the proxy model as the model for your view, nor do you give the proxy model a source model.
I think, you should calculate the row to highlight in the proxy model itself. That nicely encapsulates the functionality you're after in a single class. Or, make a more flexible API on the proxy model to add highlights to selected rows at will, so you can re-use it later on. Your mid-way solution doesn't look very nice to me. Also: what happens if two rows share the same maximum or minimum value?
I don't quite get your implementation. Especially the last two lines are quite mystifying. Why to you request data from your model, and then don't use it? Also, I would not initialize to 0 and 99999999. Those are rather arbitrairy. Instead, initialize to the maximum and minimum values of float. You can find those by including <float.h>.
First, however, try to get the proxy model working with a fixed (set of) row(s) of to highlight. If that works ok, take the next step and determine the rows dymanically. I would do that by responding to changes in the (source) model, so you can update the source model and be sure that the highlights will be properly updated as well.
-
Ok I created
@MyProxyModel* proxy = new MyProxyModel;@
And put it before the constructor as it looks like I need it in more than one spot. I still get the error:
no matching function for call to 'MyProxyModel::MyProxyModel()'
candidates are: MyProxyModel::MyProxyModel(QObject*)
MyProxyModel::MyProxyModel(const MyProxyModel&)In my MainClass I have a function that creates the table and there I set the model. I use:
@void MainClass::createReportTable(QStringList stringList)
{
mReportOptions=stringList;printModel= new QSqlRelationalTableModel (this); printModel-> setEditStrategy(QSqlTableModel::OnRowChange); printModel-> setTable (mTableName); printModel-> setRelation (2, QSqlRelation("customer", "id", "Name")); printModel->select(); proxy->setSourceModel(printModel); ui->printView->setModel(proxy);
@
So my implementation is wrong? How do I properly call the function to color the row?
The table will be getting rows added or deleted. After each change, I iterate through the table to get the high and low sales. This will identify the row to color. The table will need to be continually updated. It will only highlight the highest and lowest row. Am I close or am I in right field? -
The error on the first line of code you show, is quite clear. You have no constructor for MyProxyModel without arguments. So, I suggest you add an argument to your heap allocation of MyProxyModel. Just put the constructor of your proxy model in the same piece of code as the one you show below, and create a pointer member variable in your class declaration just like you have for printModel.
How you properly call the method to color the rows, depends on how you implemented it. Could you tell us what route you choose?
-
Here is what I have/need. I have a QSqlRelationalTableModel that will display a table. Some of the columns will be hidden based on criteria selected by the user. The highest sales will be highlighted in yellow and the lowest sales highlighted in red. Rows will be added and removed. After each change to the table, the table needs to be evaluated and the appropriate cells or rows highlighted.
[quote author="Andre" date="1302069303"]
How you properly call the method to color the rows, depends on how you implemented it. Could you tell us what route you choose?[/quote]
I was following the advice here on how to implement it. I think I have posted all the relevant code in the past posts. But to make it easier to read I will re-post in this post.
myproxymodel.h
@#ifndef MYPROXYMODEL_H
#define MYPROXYMODEL_H#include <QSortFilterProxyModel>
class MyProxyModel : public QSortFilterProxyModel
{
Q_OBJECTpublic:
MyProxyModel(QObject* parent);
~MyProxyModel();
QVariant data ( const QModelIndex & index, int role );private:
int m_lowRow; //to store the row number of the lowest row
int m_highRow; //to store the row number of the highest rowsignals:
private slots:
void getRows(int, int); // to get the row numbers that need to be highlighted};
#endif //MYPROXYMODEL_H@
myproxymodel.cpp
@#include "myproxymodel.h"MyProxyModel::MyProxyModel (QObject *parent) :
QSortFilterProxyModel(parent)
{}
QVariant MyProxyModel::data ( const QModelIndex & index, int role ) //const ** I had to remove this because of a compiler error
{
QModelIndex sourceIndex = mapToSource( index );
if (!index.isValid())
return QVariant();
if ( sourceIndex.row() == m_highRow && role == Qt::BackgroundRole )
{return QVariant( Qt::yellow ); } else { return QSortFilterProxyModel::data( index, role ); }
}
void MyProxyModel::getRows( int rowLow,int rowHigh)
{
m_highRow=rowHigh;
m_lowRow=rowLow;
}
@
mainclass.h
@#ifndef MAINCLASS_H
#define MAINCLASS_H#include <QDialog>
#include <QSqlRelationalTableModel>
#include<QSortFilterProxyModel>
#include "myproxymodel.h"class MyProxyModel;
namespace Ui {
class MainClass;
}class MainClass : public QDialog
{
Q_OBJECTpublic:
explicit MainClass(QWidget *parent = 0);
~MainClass();private:
Ui::MainClass *ui;
QString mTableName;
QString mFilterString;
QStringList mReportOptions;
void highlightCells();
QSqlRelationalTableModel *printModel;signals:
void sendRows(int, int);private slots:
void on_btnPrint_clicked();
void on_pushButton_2_clicked();
void createReportTable(QStringList);
void getTableName(QString);
void getFilterData(QString);};
#endif // MAINCLASS_H
@mainclass.cpp
@#include "mainclass.h"
#include "ui_mainclass.h"
#include <QtSql>
#include <QSqlRecord>
#include "myproxymodel.h"
#include <float.h>MyProxyModel* proxy = new MyProxyModel;
MainClass::MainClass(QWidget *parent) :
QDialog(parent),
ui(new Ui::MainClass)
{
ui->setupUi(this);
mNumTables=0;}
MainClass::~MainClass()
{
delete ui;
delete proxy;
}//get table name from user selection
void MainClass::getTableName(QString tString)
{
mTableName=tString;
}//get user filter string
void MainClass::getFilterData(QString fString)
{
mFilterString=fString;
}//Create report table based on user info stringList holds criteria
void MainClass::createReportTable(QStringList stringList)
{
mReportOptions=stringList;printModel= new QSqlRelationalTableModel (this); printModel-> setEditStrategy(QSqlTableModel::OnRowChange); printModel-> setTable (mTableName); printModel-> setRelation (2, QSqlRelation("rider", "id", "LName")); printModel-> setRelation (3, QSqlRelation("track", "id", "TrackName")); printModel-> setRelation (4, QSqlRelation("bike", "id", "BikeName")); proxy->setSourceModel(printModel); ui->printView->setModel(proxy); ui->printView->setSelectionMode(QAbstractItemView::SingleSelection); ui->printView->setSelectionBehavior(QAbstractItemView::SelectRows); ui->printView->setColumnHidden(0,true);//id printModel->select(); //routine here to hide additional columns based on user selection
printModel->setFilter(mFilterString);
ui->printView->setSortingEnabled(true);
ui->printView->resizeColumnsToContents () ;
ui->printView->horizontalHeader()->setStretchLastSection(true);
highlightCells();
printModel->select();}
//here we should iterate the table to get the rows that need to be highlighted
void MainClass::highlightCells()
{
float lowSales=FLT_MAX;
float highSales=FLT_MIN;
int rowHigh=0;
int rowLow=0;
int totalRows = 0;
float currentSales;connect(this,SIGNAL(sendRows(int, int)),
proxy, SLOT(getRows(int, int))); //to pass the rows to be highlighted to the proxy//get fastest and slowest sales and save row
int numRows =ui->printView->model()->rowCount();
for (int r=0; r<numRows; r++ )
{
if (ui->printView->isRowHidden(r))
continue;
currentSales= ui->printView->model()->index(r,5).data(Qt::DisplayRole).toFloat();
if (currentSales < lowSales)
{
lowSales = currentSales;
rowLow = r;
}
if (currentSales > highSales)
{
highSales = currentSales;
rowHigh = r;
}}
emit sendRows (rowSlow, rowFast);
//here is where I need to call proxy to highlight the appropriate cell or column
}@
Did this clear things up? Where do I go from here?
-
Hi,
I see one problem in your code:
you calculate highest / lowest value based on the proxy row,but in data ypou comparte to source row.@
MyProxyModel* proxy = new MyProxyModel;
@proxy should be a member of MainClass and mainClass should be the parent. so like this:
@
class MainClass : public QDialog
{
Q_OBJECT
...
private:
MyProxyModel* proxy
};
@@
void MainClass::createReportTable(QStringList stringList)
{
...
printModel= new QSqlRelationalTableModel (this);
...proxy = new MyProxyModel(this); proxy->setSourceModel(printModel); ui->printView->setModel(proxy); ui->printView->setSelectionMode(QAbstractItemView::SingleSelection);
}
@where do you call createReportTable????
-
Yes, but you did not take previous advice. Why is proxy a global variable?
First things first: does the code work so far? Do you get it to compile, and can you set rows to highlight (even if they are not actually the low and the high yet)?
There are different ways to determine what the highest and the lowest values are:
Use your SQL backend to calculate the data for you with a clever query
Determine from inside your proxy model. Upside: nicely encapsulated; Downside: less re-usable
Determine from outside your proxy model.
You seem to have chosen the last option for now. No matter if you choose option 2 or 3, you will need to iterate over the model to find the highest and lowest values, and you need to repeat that each time your model changes (rows added, values changed in the relevant column). You can use the model's signals to trigger that iteration, but beware of ending up in an endless loop (you changing your data, triggering a dataChanged() signal, tiggering a recalculation of the highlight, triggering an update of the data, etc...)
I would not prefer setting row numbers, but setting the actual values to highlight. This makes sure that you can highlight two rows if they share the same lowest or highest value.
-
Well, it compiles ok now, thanks Gerolf and Andre. I call createReportTable from a Signal/Slot in a different dialog. None of the rows are highlighted. I don't see where the information gets passed to the proxy and in debug it never gets there. I think putting the highlightCell code in the proxy model will be a good thing, but I want to figure it out first before I start changing a bunch of the code. Do I need to call the data function in my proxy?
-
That is an easily made mistake, by the way. Always check the signature of the function if you think it doesn't get called.
Then, in the slot in the proxy where you receive the rows to highlight, what you are actually doing is changing data in the model. You need to tell the world about such a change, by emitting the void dataChanged ( const QModelIndex & topLeft, const QModelIndex & bottomRight ) signal (defined in QAbstractItemModel). This way, the connected views know they need to update themselves.
When you just hardcode the rows to highlight (for now), do you get a highlight then?
-
Ok, I changed the const reference. Now I get a row highlighted, but it is not the row with the lowest number.
Gerolf, I am pretty sure this is because of the problem you identified
" I see one problem in your code:
you calculate highest / lowest value based on the proxy row,but in data ypou comparte to source row."
I can't figure out how to use the proxy role in the MainClass or the source Role in the data function.
I did get the following error:
QSortFilterProxyModel: index from wrong model passed to mapToSource
I just got home so I will take a look at these two errors. Does anything stick out to you?
What triggers this proxy to be called?
I think it would be a cleaner method to have the high and low highlighted in the proxy class. How might start this? -
As you calculate high and low value based on the proxy index, you just should compare to the index without mapping it, like in the below code snippet.
@
QVariant MyProxyModel::data ( const QModelIndex & index, int role ) const
{
if (!index.isValid())
return QVariant();
if ( index.row() == m_highRow && role == Qt::BackgroundRole )
{
return QVariant( Qt::yellow );
}
else
{
return QSortFilterProxyModel::data( index, role );
}
}
@you never need to call data directly for displaying data, that is done by the views.
please step through your code to check, where the mapToSource throws the problem.
I've also rewritten your sales calculation a bit, just to show a bit some things:
ui->printView->model() ==> proxy@
void MainClass::highlightCells()
{
float lowSales=FLT_MAX;
float highSales=FLT_MIN;
int rowHigh=0;
int rowLow=0;
int totalRows = 0;
float currentSales;// this should be done only once! --> move it to the place where you create the proxy connect(this, SIGNAL(sendRows(int, int)), proxy, SLOT(getRows(int, int))); //to pass the rows to be highlighted to the proxy //get fastest and slowest sales and save row int numRows = proxy->rowCount(); for (int r = 0; r < numRows; r++ ) { if (ui->printView->isRowHidden(r)) // you hide rows from the view ??? continue; currentSales = proxy->index(r,5).data(Qt::DisplayRole).toFloat(); if (currentSales < lowSales) { lowSales = currentSales; rowLow = r; } if (currentSales > highSales) { highSales = currentSales; rowHigh = r; } } emit sendRows (rowSlow, rowFast);
}
@ -
THANKS! I think I am starting to understand the model/view/delegate concept (very slightly!!!) I will continue to read about it so I can understand it better. I haven't been real successful in my search to get the answers on my own. I have just a couple of questions that I hope you would be so kind to answer. From the information I have gathered (and your insights) This is how I think this works. The Model is an interface between the data and "attaches" roles (background, foreground, font, etc) to the raw data. This will keep the roles persistent within the model so that any view will display the data appropriately? The view merely displays that data from the model with a few options available to the view (sort, column/row hidden, etc) Any changes to either the model or view will generate a signal to the other item so that they can update their data accordingly. You can have more than one model between the data and view for additional functionality.
In my case the code that we have works like this? (I could be totally off course here) When the Model (in my case the sub-classed QSortFilterProxyModel) is getting the data from the base model (it steps through each item as it is added) and it checks the state of several items (valid Index, current role) then sets the role requested and returns the role variable back the the view so that it could be set appropriately? So with this, you can set any of the roles in ItemDataRole through this method? The index passed to the data function of the QSFPM is the index of the base model? And the MaptoSource function gets the index of the proxymodel? That is why you shouldn't use the model index as a persistent item as it is fluid and can change if any changes to the models or view have been made? (this might help other people to understand the concept as well) -
[quote author="poporacer" date="1302473664"]THANKS! I think I am starting to understand the model/view/delegate concept (very slightly!!!) I will continue to read about it so I can understand it better. I haven't been real successful in my search to get the answers on my own. I have just a couple of questions that I hope you would be so kind to answer. From the information I have gathered (and your insights) This is how I think this works. The Model is an interface between the data and "attaches" roles (background, foreground, font, etc) to the raw data. This will keep the roles persistent within the model so that any view will display the data appropriately? [/quote]
This is correct.
[quote author="poporacer" date="1302473664"]The view merely displays that data from the model with a few options available to the view (sort, column/row hidden, etc) Any changes to either the model or view will generate a signal to the other item so that they can update their data accordingly.[/quote]
This needs a bit correction:
- Data changes in the model will be signaled, so all connected views update themselves.
- Data changes done in a view are handled by a delegate which usually calls setData in the model (custommodels and custom delegates might differ here). The model then signals all connected views about the changes.
[quote author="poporacer" date="1302473664"]You can have more than one model between the data and view for additional functionality.[/quote]
I would rephrase this:
- A view is connected to one model
- A model can be a proxy model to add functionality, filtering etc.
- Proxy models may contain models or proxy models, which means it is possible to cascade proxy models.
[quote author="poporacer" date="1302473664"]In my case the code that we have works like this? (I could be totally off course here) When the Model (in my case the sub-classed QSortFilterProxyModel) is getting the data from the base model (it steps through each item as it is added) and it checks the state of several items (valid Index, current role) then sets the role requested and returns the role variable back the the view so that it could be set appropriately? [/quote]
I'm not sure, whether I did not understand what you wrote or you had some misunderstanding. I try to say how it is normally:
The view requests data based on a role and an index. If you have a proxy model, it converts the index to the source index and requests the data in the source model and returns it. In your case, you have some additional data in the proxy model. If the view requests this data, it is directly returned from the proxy model.
With setData it is the same. The view directly writes to your proxy model and the proxy decides, whether the data is needed inside your proxy model (only if you have a derived proxy model) otherwise the index is converted and the source model setData is called.
[quote author="poporacer" date="1302473664"]So with this, you can set any of the roles in ItemDataRole through this method? The index passed to the data function of the QSFPM is the index of the base model?[/quote]
No, this is wrong. The view does not handle the source model indexes. From views point of view, there is only one model. It never checks, whether it is a proxy or not. You always get QSFPM indexes. If you then call the source model from QSFPM you have to call mapToSource yourself.
[quote author="poporacer" date="1302473664"]And the MaptoSource function gets the index of the proxymodel? [/quote]
Yes.
[quote author="poporacer" date="1302473664"]That is why you shouldn't use the model index as a persistent item as it is fluid and can change if any changes to the models or view have been made? (this might help other people to understand the concept as well)[/quote]
Incorrect. You can use QPersistentModelIndex for storing model indexes. The proxy models (and also source models) catch a list of persitant indexes and update them due to changes. A persitant index might become invalid later on, if a QSFPM filters out the element.
Only QPersistentModelIndex may be stored inside your class for later usage.
-
Well, I thought I had it figured out...then I sorted the table and the row that was highlighted in the view was still the same row that was highlighted before the sort. Not the correct row. Is there some signal I should be emitting or somehow capturing the sort routine? I looked at the QSortFilterProxyModel class and I didn't see any slots that would work. I thought the model retained the info for the data roles and the view would signal the changes and update the view. What am I missing?
-
My guess is, that you are now trying to let your proxy model do both the highlighting and the sorting, right? While that is possible, it complicates things a bit. You are now probably highlighting based on the row number for the requested index your proxy's data method, right? Well, sorting obviously changes the order of the rows, so those row numbers are not going to be valid anymore. You might, instead of triggering your highlight based on the requested row number, trigger it based on the row number of the source model that the row in the proxy model represents. For instance.
However, what I would do, is just keep the proxy doing one thing. Simply don't use the sorting facilities of your proxy model (or better yet, disable them), and use a separate proxy for the sorting and the filtering. So you end up with:
[Source model] -> [Highlight proxy] -> [Sort/filter proxy] -> [View]
Downside is that a highlighted row might be filtered out this way. I guess if you want to filter too, you might even have to go for:
[Source model] -> [Filter proxy] -> [Highlight proxy] -> [Sort proxy] -> [View]
-
But the problem with this order is, that the view by default will change the sort property on the model that it is displaying. In this case, that would be the Highlight proxy, while you want it to be the sort proxy. If you are going to have the filter and the sort proxies consecutive, you might as well use a single proxy to do the filtering and the sorting.
If the base model of the highlight proxy changes, it needs to re-query for the correct rows to highlight anyway. It would be the same if the base SQL model would be refreshed, for instance.
-
Hello,
I want to color a cell on a SqlRelationalTableModel.
The condition is, if the value of the cell is 1, I want it blue otherwise it should be red.
After reading the whole topic, I'm very confused. Could someone please help me out?
For example, how to start etc.
Is it the same way like poporacer did? "Just" inherit from QSortFilterProxyModel ?Thanks in advice