GLIB-2.0 error on yocto build

[Ronel_qtmaster]

@Srioff everything should be okay.Now init the build Environment.You will see the differents images you can build with bitbake

[Srioff]

@Ronel_qtmaster Thank you
i did a base build as you told and then when i tried to build my program i got this error:

ERROR: displaymod-1.0.0-r1 do_install: ExecutionError(‘/home/user1/oe-core/build/tmp/work/cortexa53-tdx-linux/displaymod/1.0.0-r1/temp/run.do_install.316633’, 1, None, None)
ERROR: Logfile of failure stored in: /home/user1/oe-core/build/tmp/work/cortexa53-tdx-linux/displaymod/1.0.0-r1/temp/log.do_install.316633
Log data follows:
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are [‘/home/user1/oe-core/build/…/layers/meta-qt5/recipes-qt/qt5/qtbase-native_git.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/meta-qt5/recipes-qt/qt5/qtbase_git.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/meta-qt5/recipes-qt/qt5/qtdeclarative_git.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/meta-qt5/recipes-qt/qt5/qtquickcontrols2_git.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/openembedded-core/meta/recipes-core/glibc/glibc_2.35.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/openembedded-core/meta/recipes-devtools/gcc/gcc-cross_11.4.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/openembedded-core/meta/recipes-devtools/gcc/gcc-runtime_11.4.bb:do_populate_sysroot’, ‘/home/user1/oe-core/build/…/layers/openembedded-core/meta/recipes-devtools/quilt/quilt-native_0.67.bb:do_populate_sysroot’, ‘virtual:native:/home/user1/oe-core/build/…/layers/openembedded-core/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot’, ‘virtual:native:/home/user1/oe-core/build/…/layers/openembedded-core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot’]
| NOTE: Installed into sysroot:
| NOTE: Skipping as already exists in sysroot: [‘qtbase-native’, ‘qtbase’, ‘qtdeclarative’, ‘qtquickcontrols2’, ‘glibc’, ‘gcc-cross-aarch64’, ‘gcc-runtime’, ‘quilt-native’, ‘patch-native’, ‘pseudo-native’, ‘zlib-native’, ‘dbus-native’, ‘libpcre2’, ‘imx-gpu-viv’, ‘libpng’, ‘libxkbcommon’, ‘fontconfig’, ‘xcb-util-image’, ‘freetype’, ‘libxcb’, ‘zlib’, ‘xcb-util-wm’, ‘libxext’, ‘openssl’, ‘vulkan-headers’, ‘xcb-util-renderutil’, ‘dbus’, ‘icu’, ‘xcb-util-keysyms’, ‘glib-2.0’, ‘systemd’, ‘libdrm’, ‘sqlite3’, ‘libjpeg-turbo’, ‘libgcc’, ‘linux-libc-headers’, ‘binutils-cross-aarch64’, ‘gmp-native’, ‘xz-native’, ‘flex-native’, ‘texinfo-dummy-native’, ‘zstd-native’, ‘libtool-native’, ‘libmpc-native’, ‘gnu-config-native’, ‘mpfr-native’, ‘attr-native’, ‘expat-native’, ‘gettext-minimal-native’, ‘glib-2.0-native’, ‘bzip2’, ‘wayland’, ‘libxxf86vm’, ‘mesa’, ‘libxshmfence’, ‘wayland-protocols’, ‘libxml2’, ‘xkeyboard-config’, ‘util-linux’, ‘expat’, ‘xcb-util’, ‘libpthread-stubs’, ‘libxau’, ‘xorgproto’, ‘libxdmcp’, ‘xcb-proto’, ‘libx11’, ‘util-macros’, ‘opkg-utils’, ‘autoconf-archive’, ‘shadow-native’, ‘base-passwd’, ‘base-files’, ‘shadow’, ‘shadow-sysroot’, ‘libsm’, ‘libpcre’, ‘libffi’, ‘bash-completion’, ‘libpam’, ‘libseccomp’, ‘kmod’, ‘acl’, ‘zstd’, ‘libcap’, ‘libpciaccess’, ‘m4-native’, ‘cmake-native’, ‘gettext-native’, ‘libpcre-native’, ‘python3-native’, ‘libffi-native’, ‘util-linux-native’, ‘libxfixes’, ‘libxdamage’, ‘xrandr’, ‘python3’, ‘util-linux-libuuid’, ‘libcap-ng’, ‘libxcrypt’, ‘ncurses’, ‘xtrans’, ‘attr’, ‘libice’, ‘flex’, ‘cracklib’, ‘xz’, ‘bzip2-native’, ‘ncurses-native’, ‘curl-native’, ‘sqlite3-native’, ‘util-linux-libuuid-native’, ‘openssl-native’, ‘readline-native’, ‘libtirpc-native’, ‘gdbm-native’, ‘libnsl2-native’, ‘libpcre2-native’, ‘libcap-ng-native’, ‘libxrandr’, ‘libxrender’, ‘libnsl2’, ‘gdbm’, ‘readline’, ‘libtirpc’, ‘perl-native’, ‘make-native’]
| DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_install
| install: cannot stat ‘/home/user1/oe-core/build/tmp/work/cortexa53-tdx-linux/displaymod/1.0.0-r1/build/displaymod’: No such file or directory
| WARNING: exit code 1 from a shell command.
ERROR: Task (/home/user1/oe-core/build/…/layers/meta-custom/recipes-cnhi/displaymod/displaymod_1.0.0.bb:do_install) failed with exit code ‘1’
NOTE: Tasks Summary: Attempted 8145 tasks of which 8131 didn’t need to be rerun and 1 failed.
NOTE: Writing buildhistory
NOTE: Writing buildhistory took: 7 seconds

Summary: 1 task failed:
/home/user1/oe-core/build/…/layers/meta-custom/recipes-cnhi/displaymod/displaymod_1.0.0.bb:do_install
Summary: There were 5 WARNING messages.
Summary: There was 1 ERROR message, returning a non-zero exit code

[Ronel_qtmaster]

@Srioff hi.The base build should already have your program if you included the recipe for it

[Srioff]

@Ronel_qtmaster I included my recipe by creating another custom layer and also added that custom layer to bblayer.conf and included the recipe to install in
IMAGE_INSTALL:append = "<name>"
under local.conf

[Ronel_qtmaster]

@Srioff when building your recipe it has already built your app.You just have to search in the install dir.You can refer to the pro file

[Srioff]

This post is deleted!

[Srioff]

@Ronel_qtmaster
thank you,
But the issue is with do_install() part of it
another hello-world qt application i was able to find in the /usr/bin folder but not the new program

[Srioff]

@Ronel_qtmaster
I came across this error
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
wireframe: 61 installed and not shipped files. [installed-vs-shipped]
ERROR: wireframe-1.0.0-r1 do_package: Fatal QA errors were found, failing task.
ERROR: Logfile of failure stored in: /home/inbe1e-dt550cn/oe-core/build/tmp/work/cortexa53-tdx-linux/wireframe/1.0.0-r1/temp/log.do_package.199565
ERROR: Task (/home/inbe1e-dt550cn/oe-core/build/../layers/meta-custom/recipes-cnhi/wireframe/wireframe_1.0.0.bb:do_package) failed with exit code '1

i dont know what to do

[Ronel_qtmaster]

@Srioff Good Morning.It seems you have a problem with the creation of recipes.I don't know which tutorial you used to create your recipe but as you're a beginner with yocto, do not start directly with the creation of recipes without enough understanding of yocto.That said , after you compile a simple image, setup yocto in Qt, create a simple project and deploy it to your target board directly.

To wrap up
1 - Remove your custom recipe
2- Build a simple image with qt included
3- Build the qt sdk to use it in Qt IDE
4-Install and setup the sdk in qt creator, add your device through ssh
5-create a simple project
6-Build it and deploy it to the target board
7-Test your program
8-Autostart your program using systemd script or x11

Only when you have mastered these steps that you can try with recipes.I mean when you will understand a bit more yocto.
Hope it helps

[Srioff]

@Ronel_qtmaster actually with a sample qt program i'm able to create a recipe flash it using "bitbake core-image-weston" and view it on the display
but only for this specific qt program which i have i'm not able to do it.
and also, this is a deliverable in my project.