UDP communication

[JonB]

@Vijaykarthikeyan
You have chosen not to verify the writeDatagram() (and for that matter the readDatagram(). Nor do you check the bind() results. I also suggested you try with connectToHost(). I leave this to you now, you have your own way of developing.

[Vijaykarthikeyan]

@JonB Where I have chosen? You said to check the return of writeDatagram().. I thought it is debugging the return byte. How could you tell me that i have chosen not to verify? I have gone through all that documentation ,tried with different ip's. Also they have came out well.. I came here to seek help to clear my doubt? how could you say like this? If the suggestion is clear and I didn't go for that..it is agreeable. But, I have tried all the ways you have said and you are accusing me I'm not interested? Is that the right way of concluding the topic

[Christian Ehrlicher]

When you want to write to a socket there is no need for bind() as written in the documentation. There is even a big red note about it. And the documentation also show you what to do to receive an udp packet. And moreover you can find two examples there which show your requested functionality.

[Vijaykarthikeyan]

@Christian-Ehrlicher ok ...i modified it..removed that binding line for sender. on looking through documentation,i have checked the return statement for both writeDatagram() and readDatagram().The former one returns 30 bytes but the latter one returns -1 which indicates it is not receiving bytes. I think the reson why it is not calling the receving function might be due to the connect function which connects readyRead() with receving function. but upon debugging that also,it gives ture..

where can i found the error?

[Christian Ehrlicher]

@Vijaykarthikeyan said in UDP communication:

returns -1 which indicates it is not receiving bytes. I think the reson why it is not calling the receving function might be due to

This does not match since your code correctly calls readDatagram() when the receive function was called due to readyRead.
Post yor actual code and a proper error description.

/edit: also try out the examples and make sure the windows firewall does not block the udp packets

[Vijaykarthikeyan]

@Christian-Ehrlicher i have turned off all the firewall securities,sir..examples in qt documentation explains separate separate modules.Here is the modified code:

#include "sender.h"
#include <QtNetwork/QUdpSocket>
#include <QMessageBox>
#include <exception>
#include <QTimer>
#include <QObject>


Sender::Sender()
    {
        send_socket = new QUdpSocket(this);
        socket = new QUdpSocket(this);
        qDebug()<<socket->bind(QHostAddress::Any,55000);
        connect(socket, &QUdpSocket::readyRead, this, &Sender::processResponse);
        QTimer* timer = new QTimer(this);
        connect(timer, &QTimer::timeout, this, &Sender::sendDatagram);
        timer->start(1000); // Adjust the interval as needed (milliseconds)


    }

    void Sender::sendDatagram()
    {
            qDebug()<<send_socket->writeDatagram(UDP_DATA, receiverAddress, receiverPort);
            qDebug() << "Sent datagram to" << receiverAddress.toString() << ":" << receiverPort << "-" <<UDP_DATA;
            //processResponse();
    }

    void Sender::processResponse()
    {   if (socket->state() == QUdpSocket::BoundState)
            {
                while (socket->hasPendingDatagrams()) {

                    datagram.resize(socket->pendingDatagramSize());
                    QHostAddress senderAddress;
                    quint16 senderPort;
                    int bytesRead = socket->readDatagram(datagram.data(), datagram.size(), &senderAddress, &senderPort);
                    QString data = QString::fromUtf8(datagram);

                    qDebug() << "Received datagram from" << senderAddress.toString() << ":" << senderPort << "-" << data;
                    if (bytesRead == -1)
                    {
                        qDebug() << "Failed to read datagram!";
                    }
                    else
                    {
                        QString data = QString::fromUtf8(datagram);
                        qDebug() << "Received datagram from" << senderAddress.toString() << ":" << senderPort << "-" << data;

                    }
                }
            }
    }

[Christian Ehrlicher]

@Vijaykarthikeyan said in UDP communication:

examples in qt documentation explains separate separate modules.

I don't see what this should matter. You should test if it works. Merging the two functions into one class (for whatever abstruse reason) is a no brainer afterwards.

Why do you use port 55000 and QHostAddress::Any on the one side and receiver_port and receiver_host on the other?

Why do you check for a socket state in your slot? No example does this.

How does your debug output look like now?

[Vijaykarthikeyan]

@Christian-Ehrlicher ok.. now, I corrected my code and finally it works. It's because the mismatch between the Ip address and ports.. I have to use 5 digit port number instead of 4..

[Vijaykarthikeyan]

@JonB This is the code which successfully ran but without your suggestions and you are accusing me that i knows nothing..That's funny..you people arguing and accusing me that my codes are wrong this wont work that wont work. IT it don't work,why can't you suggest the loophole to be corrected. but,other than this, you guys directing the topic to somewhere else

#include "test.h"
#include <QDataStream>
#include <QTimer>
#include <QtNetwork/QUdpSocket>
MainWindow::MainWindow(QWidget *parent)
: QMainWindow(parent)
{
socket = new QUdpSocket(this);
socket->bind(QHostAddress::LocalHost, receiverPort);
receiveDatagram();
}

void MainWindow::receiveDatagram()
{
if (socket->state() == QUdpSocket::BoundState)
{

    while (socket->hasPendingDatagrams())
    {
        QHostAddress senderAddress(QHostAddress::LocalHost);
        quint16 senderPort;
        datagram.resize(socket->pendingDatagramSize());
        socket->readDatagram(datagram.data(), datagram.size(), &senderAddress, &senderPort);
        //emit data_received(datagram);
        qDebug()<<datagram;
        sendDatagram();
    }
}

}

void MainWindow::sendDatagram()

{
QHostAddress receiverAddress(QHostAddress::LocalHost);

socket->writeDatagram(array, receiverAddress, receiverPort);
qDebug() << "Sent datagram to" << receiverAddress.toString() << ":" << receiverPort << "-" <<array;

}

[JonB]

@Vijaykarthikeyan Please now get help from other people than me. I'm done.