Qt6 Static Building (Windows, MinGW)

sierdzio

@SteveStage said in Qt6 Static Building (Windows, MinGW):

Yes, but why? Which arguments I'm supposed to run syncqt with?

Single zips don't need syncqt at all. Only configure, compile, install.

Here's my recommendation:

extract your sources to directory qt-everywhere-src-6.5.1
make directories: 6.5.1, 6.5.1-build
cd into 6.5.1-build
now run ../qt-everywhere-src-6.5.1/configure.bat -prefix "../6.5.1" -static -static-runtime -no-openssl -schannel -c++std c++20 -dbus-runtime -no-icu -no-glib -qt-doubleconversion -qt-pcre -qt-zlib -qt-freetype -qt-harfbuzz -qt-libpng -qt-libjpeg -qt-sqlite -qt-tiff -qt-webp -confirm-license -release -nomake examples -nomake tests
*cmake --build . --parallel
cmake --install
done :-)

After it is ready you can remove directories 6.5.1-build and qt-everywhere-src-6.5.1. Your Qt is fully contained in 6.5.1.

If you need to recompile, or run configure again - remove 6.5.1-build, make it anew, cd into it, and repeat. This way you always have 100% clean build environment.

The lines I pasted above were tested just a few days ago with Qt 6.4.3 and MSVC 2022. Since you are using MinGW some flags may need to be different.

Also recommended: skip modules you don't need, for example: -skip qtcoap -skip qtopcua -skip qtscxml -skip qtwebengine -skip qt3d -skip qtconnectivity -skip qtlanguageserver -skip qtpositioning -skip qtsensors -skip qt5compat -skip qtdatavis3d -skip qtlottie -skip qtquick3d -skip qtserialbus -skip qtwebview -skip qtactiveqt -skip qtquick3dphysics -skip qtserialport -skip qtquicktimeline -skip qtwayland -skip qtcharts -skip qthttpserver -skip qtremoteobjects -skip qtspeech -skip qtwebchannel. You need to add this to configure line.

SteveStage

I did just like you said, but result is the same...

$ ../qt-everywhere-src-6.5.1/configure.bat -prefix "../6.5.1" -static -static-runtime -no-openssl -schannel -c++std c++20 -dbus-runtime -no-icu -no-glib -qt-doubleconversion -qt-pcre -qt-zlib -qt-freetype -qt-harfbuzz -qt-libpng -qt-libjpeg -qt-sqlite -qt-tiff -qt-webp -confirm-license -release -nomake examples -nomake tests
+ cd qtbase
+ D:\Desktop\qt\qt-everywhere-src-6.5.1\qtbase\configure.bat -top-level -prefix
../6.5.1 -static -static-runtime -no-openssl -schannel -c++std c++20 -dbus-runti
me -no-icu -no-glib -qt-doubleconversion -qt-pcre -qt-zlib -qt-freetype -qt-harf
buzz -qt-libpng -qt-libjpeg -qt-sqlite -qt-tiff -qt-webp -confirm-license -relea
se -nomake examples -nomake tests
-- Windows 10 SDK version:
opt: doubleconversion val: qt
Overriding option 'doubleconversion' with 'qt' (was: 'undefined')
opt: pcre val: qt
opt: zlib val: qt
opt: freetype val: qt
Overriding option 'freetype' with 'qt' (was: 'undefined')
opt: harfbuzz val: qt
Overriding option 'harfbuzz' with 'qt' (was: 'undefined')
opt: libpng val: qt
Overriding option 'libpng' with 'qt' (was: 'undefined')
opt: libjpeg val: qt
Overriding option 'libjpeg' with 'qt' (was: 'undefined')
opt: sqlite val: qt
opt: tiff val: qt
Overriding option 'tiff' with 'qt' (was: 'undefined')
opt: webp val: qt
Overriding option 'webp' with 'qt' (was: 'undefined')
'C:/Program Files/cmake/bin/cmake.exe' '-DBUILD_SHARED_LIBS=OFF' '-DCMAKE_INSTAL
L_PREFIX=../6.5.1' '-DQT_BUILD_EXAMPLES=FALSE' '-DQT_BUILD_TESTS=FALSE' '-DCMAKE
_BUILD_TYPE=Release' '-DINPUT_static_runtime=yes' '-DINPUT_openssl=no' '-DINPUT_
schannel=yes' '-DINPUT_cxx14=yes' '-DINPUT_cxx17=yes' '-DINPUT_cxx20=yes' '-DINP
UT_cxx2b=no' '-DINPUT_dbus=runtime' '-DINPUT_icu=no' '-DINPUT_glib=no' '-DINPUT_
doubleconversion=qt' '-DINPUT_pcre=qt' '-DINPUT_system_zlib=no' '-DINPUT_freetyp
e=qt' '-DINPUT_harfbuzz=qt' '-DINPUT_libpng=qt' '-DINPUT_libjpeg=qt' '-DINPUT_sy
stem_sqlite=no' '-DINPUT_tiff=qt' '-DINPUT_webp=qt' '-G' 'Ninja' 'D:/Desktop/qt/
qt-everywhere-src-6.5.1'
-- The CXX compiler identification is GNU 13.1.0
-- The C compiler identification is GNU 13.1.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/Program Files/mingw64/bin/gcc.exe
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Program Files/mingw64/bin/c++.exe - skippe
d
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Program Files/mingw64/bin/gcc.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Checking dependencies of submodule 'qtbase'
-- Checking dependencies of submodule 'qtimageformats'
-- Checking dependencies of submodule 'qtlanguageserver'
-- Checking dependencies of submodule 'qtshadertools'
-- Checking dependencies of submodule 'qtsvg'
-- Checking dependencies of submodule 'qtdeclarative'
-- Checking dependencies of submodule 'qtquicktimeline'
-- Checking dependencies of submodule 'qtquick3d'
-- Checking dependencies of submodule 'qtmultimedia'
-- Checking dependencies of submodule 'qt3d'
-- Checking dependencies of submodule 'qt5compat'
-- Checking dependencies of submodule 'qtactiveqt'
-- Checking dependencies of submodule 'qtcharts'
-- Checking dependencies of submodule 'qtcoap'
-- Checking dependencies of submodule 'qtconnectivity'
-- Checking dependencies of submodule 'qtdatavis3d'
-- Checking dependencies of submodule 'qtwebsockets'
-- Checking dependencies of submodule 'qthttpserver'
-- Checking dependencies of submodule 'qttools'
-- Checking dependencies of submodule 'qtserialport'
-- Checking dependencies of submodule 'qtpositioning'
-- Checking dependencies of submodule 'qtwebchannel'
-- Checking dependencies of submodule 'qtwebengine'
-- Checking dependencies of submodule 'qtdoc'
-- Checking dependencies of submodule 'qtgrpc'
-- Checking dependencies of submodule 'qtlocation'
-- Checking dependencies of submodule 'qtlottie'
-- Checking dependencies of submodule 'qtmqtt'
-- Checking dependencies of submodule 'qtnetworkauth'
-- Checking dependencies of submodule 'qtopcua'
-- Checking dependencies of submodule 'qtquick3dphysics'
-- Checking dependencies of submodule 'qtquickeffectmaker'
-- Checking dependencies of submodule 'qtremoteobjects'
-- Checking dependencies of submodule 'qtscxml'
-- Checking dependencies of submodule 'qtsensors'
-- Checking dependencies of submodule 'qtserialbus'
-- Checking dependencies of submodule 'qtspeech'
-- Checking dependencies of submodule 'qttranslations'
-- Checking dependencies of submodule 'qtvirtualkeyboard'
-- Checking dependencies of submodule 'qtwayland'
-- Checking dependencies of submodule 'qtwebview'
-- Configuring submodule 'qtbase'
            -DCMAKE_C_FLAGS_DEBUG=-g
            -DCMAKE_C_FLAGS_RELEASE=-O3 -DNDEBUG
            -DCMAKE_C_FLAGS_RELWITHDEBINFO=-O2 -g -DNDEBUG
            -DCMAKE_CXX_FLAGS_DEBUG=-g
            -DCMAKE_CXX_FLAGS_RELEASE=-O3 -DNDEBUG
            -DCMAKE_CXX_FLAGS_RELWITHDEBINFO=-O2 -g -DNDEBUG
            -DCMAKE_OBJCOPY=C:/Program Files/mingw64/bin/objcopy.exe
            -DCMAKE_C_STANDARD=11
            -DCMAKE_C_STANDARD_REQUIRED=ON
            -DCMAKE_CXX_STANDARD=17
            -DCMAKE_CXX_STANDARD_REQUIRED=ON
            -DCMAKE_MODULE_PATH:STRING=D:/Desktop/qt/qt-everywhere-src-6.5.1/qtb
ase/cmake/platforms
CMake Error at qtbase/cmake/QtSyncQtHelpers.cmake:243 (message):
  syncqt.cpp failed for module QtZlib:

  The syncqt process exited with code Exit code 0xc0000139

   and without any useful output. This can happen if syncqt crashes due to the i
ncompatibilities with the standard C++ library located by either PATH or LD_LIBR
ARY_PATH environment variables. Please make sure that PATH or LD_LIBRARY_PATH do
n't point to the standard libraries different from the one you use for building
Qt.
Call Stack (most recent call first):
  qtbase/cmake/QtModuleHelpers.cmake:873 (qt_internal_target_sync_headers)
  qtbase/cmake/QtScopeFinalizerHelpers.cmake:24:EVAL:1 (qt_finalize_module)
  qtbase/src/3rdparty/zlib/CMakeLists.txt:DEFERRED


-- Configuring incomplete, errors occurred!
CMake Error at D:/Desktop/qt/qt-everywhere-src-6.5.1/qtbase/cmake/QtProcessConfigureArgs.cmake:995 (message):
  CMake exited with code 1.

^ Base folder with other directories in it.

^ Folder 6.5.1-build.

What am I doing wrong?

sierdzio

@SteveStage And for sources, you took .zip or .tar.xz? The zip has Windows line endings, maybe that has something to do with it.

If not, I'd try a different Qt version, like 6.5.0 or 6.4.3 maybe there is a bug in 6.5.1?

SteveStage

I tried sources from .tar.xz, and tried 6.5.0, but nothing changed. I have feeling that it's not because of version but because of my pc. May it be that my environment variables are wrong?

^ Variable PATH.

hskoglund

Hi I don't see any Python or Perl in your environment settings, did you install them.
Perl is optional for building Qt 6.5.x but Python is still needed.

SteveStage

$ python -h
usage: C:\Users\thest\AppData\Local\Programs\Python\Python311\python.exe [option
] ... [-c cmd | -m mod | file | -] [arg] ...
Options (and corresponding environment variables):
-b     : issue warnings about str(bytes_instance), str(bytearray_instance)
         and comparing bytes/bytearray with str. (-bb: issue errors)
-B     : don't write .pyc files on import; also PYTHONDONTWRITEBYTECODE=x
-c cmd : program passed in as string (terminates option list)
-d     : turn on parser debugging output (for experts only, only works on
         debug builds); also PYTHONDEBUG=x
-E     : ignore PYTHON* environment variables (such as PYTHONPATH)
-h     : print this help message and exit (also -? or --help)
-i     : inspect interactively after running script; forces a prompt even
         if stdin does not appear to be a terminal; also PYTHONINSPECT=x
-I     : isolate Python from the user's environment (implies -E and -s)
-m mod : run library module as a script (terminates option list)
-O     : remove assert and __debug__-dependent statements; add .opt-1 before
         .pyc extension; also PYTHONOPTIMIZE=x
-OO    : do -O changes and also discard docstrings; add .opt-2 before
         .pyc extension
-P     : don't prepend a potentially unsafe path to sys.path
-q     : don't print version and copyright messages on interactive startup
-s     : don't add user site directory to sys.path; also PYTHONNOUSERSITE
-S     : don't imply 'import site' on initialization
-u     : force the stdout and stderr streams to be unbuffered;
         this option has no effect on stdin; also PYTHONUNBUFFERED=x
-v     : verbose (trace import statements); also PYTHONVERBOSE=x
         can be supplied multiple times to increase verbosity
-V     : print the Python version number and exit (also --version)
         when given twice, print more information about the build
-W arg : warning control; arg is action:message:category:module:lineno
         also PYTHONWARNINGS=arg
-x     : skip first line of source, allowing use of non-Unix forms of #!cmd
-X opt : set implementation-specific option
--check-hash-based-pycs always|default|never:
         control how Python invalidates hash-based .pyc files
--help-env      : print help about Python environment variables and exit
--help-xoptions : print help about implementation-specific -X options and exit
--help-all      : print complete help information and exit
Arguments:
file   : program read from script file
-      : program read from stdin (default; interactive mode if a tty)
arg ...: arguments passed to program in sys.argv[1:]

I guess it is?

hskoglund

The command shell you are using, it has a prompt "$" is it PowerShell or MSys or?
If it's not CMD: best is if you do the Qt build from a CMD window (i.e. the ancient CMD.EXE)
Also, if you start a CMD window, does python -h still work in it?

SteveStage

It is MSYS2.
I just tried it from PowerShell and I finally got something other than with Git Bash.

PS D:\Desktop\qt-w\6.5.1-build> ../qt-everywhere-src-6.5.1/configure.bat -prefix "../6.5.1" -static -static-runtime -no-openssl -schannel -c++std c++20 -dbus-runtime -no-icu -no-glib -qt-doubleconversion -qt-pcre -qt-zlib -qt-freetype -qt-harfbuzz -qt-libpng -qt-libjpeg -qt-sqlite -qt-tiff -qt-webp -confirm-license -release -nomake examples -nomake tests
+ cd qtbase
+ D:\Desktop\qt-w\qt-everywhere-src-6.5.1\qtbase\configure.bat -top-level -prefix ../6.5.1 -static -static-runtime -no-openssl -schannel -c++std c++20 -dbus-runtime -no-icu -no-glib -qt-doubleconversion -qt-pcre -qt-zlib -qt-freetype -qt-harfbuzz -qt-libpng -qt-libjpeg -qt-sqlite -qt-tiff -qt-webp -confirm-license -release -nomake examples -nomake tests
-- Windows 10 SDK version:
opt: doubleconversion val: qt
Overriding option 'doubleconversion' with 'qt' (was: 'undefined')
opt: pcre val: qt
opt: zlib val: qt
opt: freetype val: qt
Overriding option 'freetype' with 'qt' (was: 'undefined')
opt: harfbuzz val: qt
Overriding option 'harfbuzz' with 'qt' (was: 'undefined')
opt: libpng val: qt
Overriding option 'libpng' with 'qt' (was: 'undefined')
opt: libjpeg val: qt
Overriding option 'libjpeg' with 'qt' (was: 'undefined')
opt: sqlite val: qt
opt: tiff val: qt
Overriding option 'tiff' with 'qt' (was: 'undefined')
opt: webp val: qt
Overriding option 'webp' with 'qt' (was: 'undefined')
'C:/Program Files/cmake/bin/cmake.exe' '-DBUILD_SHARED_LIBS=OFF' '-DCMAKE_INSTALL_PREFIX=../6.5.1' '-DQT_BUILD_EXAMPLES=FALSE' '-DQT_BUILD_TESTS=FALSE' '-DCMAKE_BUILD_TYPE=Release' '-DINPUT_static_runtime=yes' '-DINPUT_openssl=no' '-DINPUT_schannel=yes' '-DINPUT_cxx14=yes' '-DINPUT_cxx17=yes' '-DINPUT_cxx20=yes' '-DINPUT_cxx2b=no' '-DINPUT_dbus=runtime' '-DINPUT_icu=no' '-DINPUT_glib=no' '-DINPUT_doubleconversion=qt' '-DINPUT_pcre=qt' '-DINPUT_system_zlib=no' '-DINPUT_freetype=qt' '-DINPUT_harfbuzz=qt' '-DINPUT_libpng=qt' '-DINPUT_libjpeg=qt' '-DINPUT_system_sqlite=no' '-DINPUT_tiff=qt' '-DINPUT_webp=qt' '-G' 'Ninja' 'D:/Desktop/qt-w/qt-everywhere-src-6.5.1'
-- The CXX compiler identification is GNU 13.1.0
-- The C compiler identification is GNU 13.1.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/Program Files/mingw64/bin/gcc.exe
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Check for working CXX compiler: C:/Program Files/mingw64/bin/c++.exe - skipped
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working C compiler: C:/Program Files/mingw64/bin/gcc.exe - skipped
-- Detecting C compile features
-- Detecting C compile features - done
-- Checking dependencies of submodule 'qtbase'
-- Checking dependencies of submodule 'qtimageformats'
-- Checking dependencies of submodule 'qtlanguageserver'
-- Checking dependencies of submodule 'qtshadertools'
-- Checking dependencies of submodule 'qtsvg'
-- Checking dependencies of submodule 'qtdeclarative'
-- Checking dependencies of submodule 'qtquicktimeline'
-- Checking dependencies of submodule 'qtquick3d'
-- Checking dependencies of submodule 'qtmultimedia'
-- Checking dependencies of submodule 'qt3d'
-- Checking dependencies of submodule 'qt5compat'
-- Checking dependencies of submodule 'qtactiveqt'
-- Checking dependencies of submodule 'qtcharts'
-- Checking dependencies of submodule 'qtcoap'
-- Checking dependencies of submodule 'qtconnectivity'
-- Checking dependencies of submodule 'qtdatavis3d'
-- Checking dependencies of submodule 'qtwebsockets'
-- Checking dependencies of submodule 'qthttpserver'
-- Checking dependencies of submodule 'qttools'
-- Checking dependencies of submodule 'qtserialport'
-- Checking dependencies of submodule 'qtpositioning'
-- Checking dependencies of submodule 'qtwebchannel'
-- Checking dependencies of submodule 'qtwebengine'
-- Checking dependencies of submodule 'qtdoc'
-- Checking dependencies of submodule 'qtgrpc'
-- Checking dependencies of submodule 'qtlocation'
-- Checking dependencies of submodule 'qtlottie'
-- Checking dependencies of submodule 'qtmqtt'
-- Checking dependencies of submodule 'qtnetworkauth'
-- Checking dependencies of submodule 'qtopcua'
-- Checking dependencies of submodule 'qtquick3dphysics'
-- Checking dependencies of submodule 'qtquickeffectmaker'
-- Checking dependencies of submodule 'qtremoteobjects'
-- Checking dependencies of submodule 'qtscxml'
-- Checking dependencies of submodule 'qtsensors'
-- Checking dependencies of submodule 'qtserialbus'
-- Checking dependencies of submodule 'qtspeech'
-- Checking dependencies of submodule 'qttranslations'
-- Checking dependencies of submodule 'qtvirtualkeyboard'
-- Checking dependencies of submodule 'qtwayland'
-- Checking dependencies of submodule 'qtwebview'
-- Configuring submodule 'qtbase'
            -DCMAKE_C_FLAGS_DEBUG=-g
            -DCMAKE_C_FLAGS_RELEASE=-O3 -DNDEBUG
            -DCMAKE_C_FLAGS_RELWITHDEBINFO=-O2 -g -DNDEBUG
            -DCMAKE_CXX_FLAGS_DEBUG=-g
            -DCMAKE_CXX_FLAGS_RELEASE=-O3 -DNDEBUG
            -DCMAKE_CXX_FLAGS_RELWITHDEBINFO=-O2 -g -DNDEBUG
            -DCMAKE_OBJCOPY=C:/Program Files/mingw64/bin/objcopy.exe
            -DCMAKE_C_STANDARD=11
            -DCMAKE_C_STANDARD_REQUIRED=ON
            -DCMAKE_CXX_STANDARD=17
            -DCMAKE_CXX_STANDARD_REQUIRED=ON
            -DCMAKE_MODULE_PATH:STRING=D:/Desktop/qt-w/qt-everywhere-src-6.5.1/qtbase/cmake/platforms
-- Configuring submodule 'qtimageformats'
-- Configuring submodule 'qtlanguageserver'
-- Configuring submodule 'qtshadertools'
-- Configuring submodule 'qtsvg'
-- Configuring submodule 'qtdeclarative'
-- Configuring submodule 'qtquicktimeline'
-- Configuring submodule 'qtquick3d'
-- Configuring submodule 'qtmultimedia'
-- Configuring submodule 'qt3d'
CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/render/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/scene3d/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/extras/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/scene2d/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/input/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/logic/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt3d/src/quick3d/imports/animation/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring submodule 'qt5compat'
CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qt5compat/src/imports/graphicaleffects5/CMakeLists.txt:36 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring submodule 'qtactiveqt'
-- Configuring submodule 'qtcharts'
-- Configuring submodule 'qtcoap'
-- Configuring submodule 'qtconnectivity'
-- Configuring submodule 'qtdatavis3d'
-- Configuring submodule 'qtwebsockets'
CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qtwebsockets/src/imports/qmlwebsockets/CMakeLists.txt:4 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring submodule 'qthttpserver'
-- Configuring submodule 'qttools'
-- Could NOT find Clang (missing: Clang_DIR)
-- Could NOT find Clang (missing: Clang_DIR)
-- Configuring submodule 'qtserialport'
-- Configuring submodule 'qtpositioning'
-- Configuring submodule 'qtwebchannel'
CMake Warning (dev) at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6Qml/Qt6QmlBuildInternals.cmake:404 (message):
  INSTALL_SOURCE_QMLTYPES option is deprecated and should not be used.
  Please port your module to use declarative type registration.
Call Stack (most recent call first):
  qtwebchannel/src/imports/webchannel/CMakeLists.txt:10 (qt_internal_add_qml_module)
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring submodule 'qtwebengine'
Traceback (most recent call last):
  File "<string>", line 1, in <module>
ModuleNotFoundError: No module named 'html5lib'
[QtWebEngine] -- Windows 10 SDK version:
[QtWebEngine] -- Support check for QtWebEngine failed: Static build is not supported.
[QtWebEngine] -- Support check for QtPdf failed: node.js version 12 or later is required.
-- Configuring submodule 'qtdoc'
-- Configuring submodule 'qtgrpc'
-- Configuring submodule 'qtlocation'
-- Configuring submodule 'qtlottie'
-- Configuring submodule 'qtmqtt'
-- Configuring submodule 'qtnetworkauth'
-- Configuring submodule 'qtopcua'
-- Configuring submodule 'qtquick3dphysics'
-- Configuring submodule 'qtquickeffectmaker'
Nodes path: ./qml/QtQuickEffectMaker/defaultnodes
-- Configuring submodule 'qtremoteobjects'
-- Configuring submodule 'qtscxml'
-- Configuring submodule 'qtsensors'
-- Configuring submodule 'qtserialbus'
-- Configuring submodule 'qtspeech'
-- Configuring submodule 'qttranslations'
-- Configuring submodule 'qtvirtualkeyboard'
-- Configuring submodule 'qtwayland'
Skipping the build as the condition "LINUX OR MACOS OR QNX" is not met.
-- Configuring submodule 'qtwebview'
-- Could NOT find Qt6WebEngineCore (missing: Qt6WebEngineCore_DIR)
CMake Warning at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6/Qt6Config.cmake:214 (message):
  Failed to find optional Qt component "WebEngineCore".

  Expected Config file at
  "D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6WebEngineCore/Qt6WebEngineCoreConfig.cmake"
  does NOT exist

Call Stack (most recent call first):
  qtwebview/CMakeLists.txt:15 (find_package)

-- Could NOT find Qt6WebEngineQuick (missing: Qt6WebEngineQuick_DIR)

CMake Warning at D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6/Qt6Config.cmake:214 (message):
  Failed to find optional Qt component "WebEngineQuick".

  Expected Config file at
  "D:/Desktop/qt-w/6.5.1-build/qtbase/lib/cmake/Qt6WebEngineQuick/Qt6WebEngineQuickConfig.cmake"
  does NOT exist

Call Stack (most recent call first):
  qtwebview/CMakeLists.txt:15 (find_package)



-- Configuration summary shown below. It has also been written to D:/Desktop/qt-w/6.5.1-build/config.summary
-- Configure with --log-level=STATUS or higher to increase CMake's message verbosity. The log level does not persist across reconfigurations.

-- Configure summary:

Building for: win32-g++ (x86_64, CPU features: cx16 mmx sse sse2 sse3)
Compiler: gcc 13.1.0
Build options:
  Mode ................................... release
  Optimize release build for size ........ no
  Fully optimize release builds (-O3) .... no
  Building shared libraries .............. no
  Using C standard ....................... C11
  Using C++ standard ..................... C++20
  Relocatable ............................ no
  Using precompiled headers .............. yes
  Using Link Time Optimization (LTCG) .... no
  Using Intel CET ........................ no
  Target compiler supports:
    x86 Intrinsics ....................... Basic VAES AVX512VBMI2
  Sanitizers:
    Addresses ............................ no
    Threads .............................. no
    Memory ............................... no
    Fuzzer (instrumentation only) ........ no
    Undefined ............................ no
  Build parts ............................ libs tools
  App store compliance ................... no
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... no
  Qt Gui ................................. yes
  Qt Network ............................. yes
  Qt PrintSupport ........................ yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. yes
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... no
  udev ................................... no
  OpenSSL ................................ no
    Qt directly linked to OpenSSL ........ no
  OpenSSL 1.1 ............................ no
  OpenSSL 3.0 ............................ no
  Using system zlib ...................... no
  Zstandard support ...................... no
  Thread support ......................... yes
Common build options:
  Linker can resolve circular dependencies  yes
Qt Core:
  backtrace .............................. no
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ no
  GLib ................................... no
  ICU .................................... no
  Using system libb2 ..................... no
  Built-in copy of the MIME database ..... yes
  cpp/winrt base ......................... no
  Tracing backend ........................ <none>
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  PCRE2 .................................. yes
    Using system PCRE2 ................... no
  Application permissions ................ no
Qt Sql:
  SQL item models ........................ yes
Qt Network:
  getifaddrs() ........................... no
  IPv6 ifname ............................ no
  libproxy ............................... no
  Schannel ............................... yes
  DTLS ................................... no
  OCSP-stapling .......................... no
  SCTP ................................... no
  Use system proxies ..................... yes
  GSSAPI ................................. no
  Brotli Decompression Support ........... no
  qIsEffectiveTLD() ...................... yes
    Built-in publicsuffix database ....... yes
    System publicsuffix database ......... no
Core tools:
  Android deployment tool ................ yes
  macOS deployment tool .................. no
  Windows deployment tool ................ yes
  qmake .................................. yes
Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ no
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. no
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... no
    PNG .................................. yes
      Using system libpng ................ no
  Text formats:
    HtmlParser ........................... yes
    CssParser ............................ yes
    OdfWriter ............................ yes
    MarkdownReader ....................... yes
      Using system libmd4c ............... no
    MarkdownWriter ....................... yes
  EGL .................................... no
  OpenVG ................................. no
  OpenGL:
    Desktop OpenGL ....................... no
    Dynamic OpenGL ....................... yes
    OpenGL ES 2.0 ........................ no
    OpenGL ES 3.0 ........................ no
    OpenGL ES 3.1 ........................ no
    OpenGL ES 3.2 ........................ no
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. no
  libinput ............................... no
  HiRes wheel support in libinput ........ no
  INTEGRITY HID .......................... no
  mtdev .................................. no
  tslib .................................. no
  xkbcommon .............................. no
  X11 specific:
    XLib ................................. no
    XCB Xlib ............................. no
    EGL on X11 ........................... no
    xkbcommon-x11 ........................ no
    xcb-sm ............................... no
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. no
  EGLFS details:
    EGLFS OpenWFD ........................ no
    EGLFS i.Mx6 .......................... no
    EGLFS i.Mx6 Wayland .................. no
    EGLFS RCAR ........................... no
    EGLFS EGLDevice ...................... no
    EGLFS GBM ............................ no
    EGLFS VSP2 ........................... no
    EGLFS Mali ........................... no
    EGLFS Raspberry Pi ................... no
    EGLFS X11 ............................ no
  LinuxFB ................................ no
  VNC .................................... no
  VK_KHR_display ......................... no
  QNX:
    lgmon ................................ no
    IMF .................................. no
  XCB:
    Using system-provided xcb-xinput ..... no
    GL integrations:
      GLX Plugin ......................... no
        XCB GLX .......................... no
      EGL-X11 Plugin ..................... no
  Windows:
    Direct 2D ............................ yes
    Direct 2D 1.1 ........................ yes
    DirectWrite .......................... yes
    DirectWrite 3 ........................ yes
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows WindowsVista
Qt Testlib:
  Tester for item models ................. yes
  Batch tests ............................ no
Qt PrintSupport:
  CUPS ................................... no
Qt Sql Drivers:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. no
  OCI (Oracle) ........................... no
  ODBC ................................... yes
  PostgreSQL ............................. no
  SQLite ................................. yes
    Using system provided SQLite ......... no
Further Image Formats:
  JasPer ................................. no
  MNG .................................... no
  TIFF ................................... yes
    Using system libtiff ................. no
  WEBP ................................... yes
    Using system libwebp ................. no
Qt QML:
  QML network support .................... yes
  QML debugging and profiling support .... yes
  QML just-in-time compiler .............. yes
  QML XML http request ................... yes
  QML Locale ............................. yes
Qt QML Models:
  QML list model ......................... yes
  QML delegate model ..................... yes
Qt Quick:
  AnimatedImage item ..................... yes
  Canvas item ............................ yes
  Support for Qt Quick Designer .......... yes
  Flipable item .......................... yes
  GridView item .......................... yes
  ListView item .......................... yes
  TableView item ......................... yes
  TreeView item .......................... yes
  Path support ........................... yes
  PathView item .......................... yes
  Positioner items ....................... yes
  Repeater item .......................... yes
  ShaderEffect item ...................... yes
  Sprite item ............................ yes
Qt Quick Templates 2:
  Hover support .......................... yes
  Multi-touch support .................... yes
  Calendar support ....................... yes
Qt Quick Controls 2:
  Styles ................................. Basic Fusion Imagine iOS Material Universal macOS Windows
QtQuick3D:
  Assimp ................................. yes
  System Assimp .......................... no
Qt Multimedia:
  Spatial Audio .......................... yes
  Spatial Audio (Quick3D) ................ yes
  Low level Audio Backend:
    ALSA (experimental) .................. no
    PulseAudio ........................... no
    MMRenderer ........................... no
    CoreAudio ............................ no
    Windows Media SDK .................... yes
    Open SLES (Android) .................. no
    Web Assembly ......................... no
  Plugin:
    GStreamer 1.0 ........................ no
    FFmpeg ............................... no
    MMRenderer ........................... no
    AVFoundation ......................... no
    Windows Media Foundation ............. no
  Hardware acceleration and features:
    Video for Linux ...................... no
    VAAPI support ........................ no
    Linux DMA buffer support ............. no
    VideoToolbox ......................... no
Qt 3D:
  Assimp ................................. yes
  System Assimp .......................... no
  Use SSE2 instructions .................. yes
  Use AVX2 instructions .................. no
  Aspects:
    Render aspect ........................ yes
    Input aspect ......................... yes
    Logic aspect ......................... yes
    Animation aspect ..................... yes
    Extras aspect ........................ yes
Qt 3D APIs:
  Vulkan ................................. no
Qt 3D Renderers:
  OpenGL Renderer ........................ yes
  RHI Renderer ........................... yes
Qt3D Geometry Loaders:
  Autodesk FBX ........................... no
Qt 5 Compatibility Libraries:
  iconv .................................. no
Qt Charts Types:
  Area Chart ............................. yes
  Line Chart ............................. yes
  Spline Chart ........................... yes
  Scatter Chart .......................... yes
  Bar Chart .............................. yes
  Pie Chart .............................. yes
  Boxplot Chart .......................... yes
  Candlestick Chart ...................... yes
Qt Axis Types:
  DateTime Axis .......................... yes
Qt Bluetooth:
  BlueZ .................................. no
  BlueZ Low Energy ....................... no
  Linux Crypto API ....................... no
  WinRT Bluetooth API .................... no
Qt Tools:
  Qt Assistant ........................... yes
  QDoc ................................... no
  Clang-based lupdate parser ............. no
  Qt Designer ............................ yes
  Qt Distance Field Generator ............ yes
  Qt Linguist ............................ yes
  pixeltool .............................. yes
  qdbus .................................. yes
  Qt Attributions Scanner ................ yes
  qtdiag ................................. yes
  qtplugininfo ........................... yes
Serial Port:
  ntddmodm ............................... no
WebEngine Repository Build Options:
  Build Ninja ............................ no
  Build Gn ............................... yes
  Jumbo Build ............................ yes
  Developer build ........................ no
  Build QtWebEngine Modules:
    Build QtWebEngineCore ................ no
    Build QtWebEngineWidgets ............. no
    Build QtWebEngineQuick ............... no
  Build QtPdf Modules:
    Build QtPdfWidgets ................... no
    Build QtPdfQuick ..................... no
  Qt 3rdparty libs:
    qtfreetype ........................... yes
    qtpng ................................ yes
    qtpng ................................ yes
    qtjpeg ............................... yes
    qtzlib ............................... yes
  Qt Protobuf tools:
    Qt Protobuf generator ................ no
  Qt GRPC:
    gRPC support ......................... yes
    Native gRPC support .................. no
  Qt GRPC tools:
    Qt GRPC generator .................... no
  Qt Opcua:
    Open62541 ............................ yes
    Unified Automation C++ SDK ........... no
    Support for namespace 0 NodeId names . yes
    Namespace 0 NodeIds generator ........ no
    Open62541 security support ........... no
    Support for global discovery server .. no
  Qt Remote Objects:
    High Availability Manager (ham) ...... no
  Qt Scxml:
    ECMAScript data model for QtScxml .... yes
  Qt Sensors:
    WinRT sensors backend ................ no
  Qt SerialBus:
    Socket CAN ........................... no
    Socket CAN FD ........................ no
    SerialPort Support ................... yes
  Qt TextToSpeech:
    Flite ................................ no
    Flite with ALSA ...................... no
    Speech Dispatcher .................... no
  Qt Virtualkeyboard:
    Desktop integration .................. yes
    Built-in layouts ..................... yes
    Key navigation ....................... no
    Retro style as default ............... no
    Sensitive Debug ...................... no
    Cerence .............................. no
      Static Linking ..................... no
      Handwriting ........................ no
        Alphabetic ....................... no
        CJK .............................. no
      XT9 ................................ no
        XT9 Debug ........................ no
        XT9 9-key layouts ................ no
      Bundle resources ................... no
        Handwriting .....................
. no
        XT9 .............................. no
    Hunspell ............................. no
      Using Hunspell copy from 3rdparty/ . no
    OpenWnn .............................. yes
    MyScript ............................. no
    Language support enabled for:
      Arabic ............................. yes
      Bulgarian .......................... yes
      Czech .............................. yes
      Danish ............................. yes
      German ............................. yes
      Greek .............................. yes
      English GB ......................... yes
      English US ......................... yes
      Spanish ............................ yes
      Spanish Mexico ..................... yes
      Estonian ........................... yes
      Farsi .............................. yes
      Finnish ............................ yes
      French Canada ...................... yes
      French France ...................... yes
      Hebrew ............................. yes
  Note: Using static linking will disable the use of dynamically loaded plugins. Make sure to import all needed static plugins, or compile needed modules into the library.
Note: Hunspell in Qt Virtual Keyboard is not enabled. Spelling correction will not be available.

WARNING: Basic cpp/winrt support missing. Some features might not be available.
WARNING: QDoc will not be compiled, probably because libclang could not be located. This means that you cannot build the Qt documentation.
Either set CMAKE_PREFIX_PATH or LLVM_INSTALL_DIR to the location of your llvm installation.
On Linux systems, you may be able to install libclang by installing the libclang-dev or libclang-devel package, depending on your distribution.
On macOS, you can use Homebrew's llvm package.
You will also need to set the FEATURE_clang CMake variable to ON to re-evaluate this check.
WARNING: Clang-based lupdate parser will not be available. LLVM and Clang C++ libraries have not been found.
You will need to set the FEATURE_clangcpp CMake varia    Hindi .............................. yes
      Croatian ........................... yes
      Hungarian .......................... yes
      Indonesian ......................... yes
      Italian ............................ yes
      Japanese ........................... yes
      Korean ............................. yes
      Malay .............................. yes
      Norwegian .......................... yes
      Dutch .............................. yes
      Polish ............................. yes
      Portuguese Brazil .................. yes
      Portuguese Portugal ................ yes
      Romanian ........................... yes
      Russian ............................ yes
      Slovak ............................. yes
      Slovenian .......................... yes
      Albanian ........................... yes
      Serbian ............................ yes
      Swedish ............................ yes
      Thai ............................... yes
      Turkish .........................ble to ON to re-evaluate this check.
WARNING: QtWebEngine won't be built. Static build is not supported.
WARNING: QtPdf won't be built. node.js version 12 or later is required.
WARNING: No perl found, compiling opus without some optimizations.

... yes
      Ukrainian .......................... yes
      Vietnamese ......................... yes
      Simplified Chinese ................. yes
      Traditional Chinese ................ yes
      HongKong Chinese ................... no
    Traditional chinese input methods:
      Zhuyin ............................. yes
      Cangjie ............................ yes

--

Qt is now configured for building. Just run 'cmake --build . --parallel'

Once everything is built, you must run 'cmake --install .'
Qt will be installed into 'D:/Desktop/qt-w/6.5.1'

To configure and build other Qt modules, you can use the following convenience script:
        D:/Desktop/qt-w/6.5.1/bin/qt-configure-module.bat

If reconfiguration fails for some reason, try removing 'CMakeCache.txt' from the build directory
Alternatively, you can add the --fresh flag to your CMake flags.

-- Configuring done (221.5s)
-- Generating done (13.9s)
-- Build files have been written to: D:/Desktop/qt-w/6.5.1-build

SteveStage

I got another error...

mzimmers

@SteveStage I've been struggling on and off with this for years. I currently have a couple open bug reports on this topic, so TQC at least is aware of the problem(s). I don't have an answer for you, but a couple things:

don't use git bash for your build. A command terminal is best, but PowerShell should work, too.
when you initialize the repository (prior to your configure command), disable qtwebengine:

perl init-repository --module-subset=default,-qtwebengine

This will speed up your builds, plus you can't build QtWebEngine statically (probably because it would result in enormous executables).

this is the command that most recently worked for me, though it doesn't now:

configure.bat -opensource -confirm-license -static -static-runtime -release -platform win32-g++ -opengl desktop -skip qtwebengine -nomake examples -nomake tests -Wno-dev -prefix c:\qt\6.5.1_static

Good luck...