How to replace some characters from selected text of QPlainTextEdit

[deleted385]

@Gojir4, that's necessary, thanks.

[Gojir4]

For the cursor blinking I've to add QPlainTextEdit::dropEvent(event); in drop event BUT if I add that, It inserts file name in the editor.

I think you need to call event->acceptProposedAction()when you accept the drop action. But I'm not sure this is related to you issue.

[deleted385]

With a lot of Left, Right, Up, Down, Anchor etc., so far I've achieved this:

so I can comment in and out an inline selection whole day BUT for multiline, still couldn't figure out why does it keep selecting the next line! Here's what I have right now:

void QueryView::commentLines()
{
    auto cursor = editor->textCursor();
    if(!cursor.hasSelection()) return;

    auto text = cursor.selectedText();
    int start = cursor.selectionStart();
    int end = cursor.selectionEnd();
    cursor.setPosition(start);
    int startLine = cursor.blockNumber();
    cursor.setPosition(end);
    int endLine = cursor.blockNumber();
    int numberOfLines = endLine - startLine + 1;
    cursor.setPosition(start);

    if(text.startsWith("--")){
        if(numberOfLines > 1){
            for(int i = 0; i < numberOfLines; ++i){
                while (cursor.position() < end) {
                    cursor.movePosition(QTextCursor::NextWord, QTextCursor::KeepAnchor);
                    if(cursor.selectedText().contains("--"))
                        cursor.insertText(cursor.selectedText().replace("--", ""));
                }
                cursor.movePosition(QTextCursor::NextBlock);
            }
            cursor.setPosition(start, QTextCursor::MoveAnchor);
            cursor.movePosition(QTextCursor::Down, QTextCursor::KeepAnchor, numberOfLines);
        }
        else{
            int count = 0;
            while (cursor.position() < end) {
                cursor.movePosition(QTextCursor::NextWord, QTextCursor::KeepAnchor);
                if(cursor.selectedText().contains("--"))
                {
                    cursor.insertText(cursor.selectedText().replace("--", ""));
                    count += 2;
                }
            }
            cursor.setPosition(start, QTextCursor::MoveAnchor);
            cursor.setPosition(end - count, QTextCursor::KeepAnchor);
        }
    }
    else{
        if(numberOfLines > 1){
            for(int i = 0; i < numberOfLines; ++i)
            {
                cursor.insertText("--");
                cursor.movePosition(QTextCursor::NextBlock);
            }
            cursor.movePosition(QTextCursor::Up, QTextCursor::KeepAnchor, numberOfLines);
        }
        else
        {
            cursor.insertText("--");
            cursor.movePosition(QTextCursor::Left, QTextCursor::MoveAnchor, 2);
            cursor.movePosition(QTextCursor::Right, QTextCursor::KeepAnchor, text.length() + 2);
        }
    }
    editor->setTextCursor(cursor);
}

The file name is at the top because of calling QPlainTextEdit::dropEvent(event); in dropEvent.

[deleted385]

@Gojir4, tried that BUT doesn't work.

[Gojir4]

@Emon-Haque Here is what I have for a code editor, similar to what you are doing. It works well on my side:

#ifndef QT_NO_DRAGANDDROP
void MainWindow::dragEnterEvent(QDragEnterEvent *e)
{
    if(e->mimeData()->hasUrls() && e->mimeData()->hasFormat("text/uri-list")){

        for(const QUrl &url : e->mimeData()->urls()){
            if(url.isLocalFile()){
                QFileInfo fi(url.toLocalFile());
                if(fi.exists() && (fi.suffix().startsWith("js"))){
                    e->acceptProposedAction();
                    return;
                }
            }
        }
    }
}
void MainWindow::dropEvent(QDropEvent *e)
{
    if(e->mimeData()->hasUrls() && e->mimeData()->hasFormat("text/uri-list")){
        e->acceptProposedAction();
        QStringList files;
        for(const QUrl &url : e->mimeData()->urls()){
            QFileInfo fi(url.toLocalFile());
            if(fi.exists() && (fi.suffix().startsWith("js"))){
                files << fi.absoluteFilePath();
            }
        }
        if(!files.isEmpty()){
            // Open files
            m_wCodeEditorMdi->openJsFiles(files);
        }
    }
}

void MainWindow::dragMoveEvent(QDragMoveEvent *e)
{
    e->acceptProposedAction();
}

void MainWindow::dragLeaveEvent(QDragLeaveEvent *e)
{
    e->accept();
}
#endif

Hope this helps

[deleted385]

@Gojir4, I've these:

void CodeEditor::dragEnterEvent(QDragEnterEvent *event)
{ 
    if(event->mimeData()->text().contains('\n')){
        event->ignore();
        return;
    }
    event->acceptProposedAction();
    //QPlainTextEdit::dragEnterEvent(event);
}
void CodeEditor::dropEvent(QDropEvent *event)
{
    event->acceptProposedAction();
    //QPlainTextEdit::dropEvent(event);
    QFile file (event->mimeData()->text().remove("file:///"));
    file.open(QIODevice::ReadOnly);
    QTextStream in(&file);
    insertPlainText(in.readAll());
    file.close();
}

if i don't uncomment QPlainTextEdit::dropEvent(event); inside dropEvent, cursor doesn't blink and stuck at the end. If I click somewhere else cursor doesn't apparently move BUT I can type where I clicked.

[Gojir4]

@Emon-Haque I suspect that the drag&drop event is in a unfinished state and the cursor stop blinking. calling e->accept() in dragLeaveEvent should terminate the drag&drop action and restore the cursor blinking

[deleted385]

@Gojir4, exactly, now with dragMove and dragleave with your content. it blinks. Thanks. For frag and drop, I always have to implement all 4 of those?

[Gojir4]

@Emon-Haque Honestly I don't know. I started recently using drag and drop. the doc says

For more sophisticated applications, reimplementing dragMoveEvent() and dragLeaveEvent() will let you make certain parts of your widgets sensitive to drop events, and give you more control over drag and drop in your application.

I'm not really understanding what it means. But yeah maybe my solution is over-complicated

[deleted385]

Here's a hacky solution. In the multiline uncomment section if I do this I can comment / uncomment whole day:

if(numberOfLines > 1){
    for(int i = 0; i < numberOfLines; ++i){
        while (cursor.position() < end) {
            cursor.movePosition(QTextCursor::NextWord, QTextCursor::KeepAnchor);
            if(cursor.selectedText().contains("--"))
                cursor.insertText(cursor.selectedText().replace("--", ""));
        }
        cursor.movePosition(QTextCursor::NextBlock);
    }
    cursor.setPosition(start, QTextCursor::MoveAnchor);
    cursor.movePosition(QTextCursor::Down, QTextCursor::KeepAnchor, numberOfLines - 2);
    cursor.movePosition(QTextCursor::EndOfLine, QTextCursor::KeepAnchor);
}

For now I'll move forward with that as I'm new to Qt Widget app and, hopefully, will keep exploring more.

[deleted385]

@Gojir4, I wanted to accept this as answer, BUT wrongly I've selected mine. How to remove the currently accepted and set yours as accepted?

[JonB]

@Emon-Haque I think you just do so from the vertical "..." at the right-hand side of the new answer you want to accept.