can't debug hand-built Qt Frameworks

davecotter

so, to recap, i need to do these commands:

> cd <path_to>/Qt5_Source/build
> ../qt5/configure -developer-build -debug-and-release -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia
> make
> ../qt5/configure -prefix ./release -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia
> make
> make install

is that all correct?
and after that i can build either debug or release version of my app and it should work?
and i can debug into the source of Qt?
and when i run macdeployqt, it will use my built version of Qt?
do i need to specify anything extra on the command line for macdeployqt?

SGaist

no use two different build folder
it should
you should be able to
yes, note that you may need to build the qttools module or macdeployqt directly from it. But you should be able to use the one from your pre-built installation.
that depends on how you want to distribute your application. You should sign it and possibly notarize it.

davecotter

do you mean this:

> cd <path_to>/Qt5_Source/build
> ../qt5/configure -prefix ./debug -developer-build -debug-and-release -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia
> make
> ../qt5/configure -prefix ./release -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia
> make

if you don't mean that can you please just spell out exactly what you mean?
4) do you mean this:

../qt5/configure -prefix ./release -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia -feature qttools

if not can you spell out what you mean?
5) yes i only have macdeployqt do the linking / signing / hardening. i already have a post process that builds a dmg and notarizes. i was only asking if i need something extra on the macdeployqt command line to get it to use MY copies of the built binaries for Qt

SGaist

I mean: use two different folders for your out of source builds. You do not want it mix the build artifacts of your developer build and your release build.

Snip

If memory serves well, macdeployqt will use the information from the frameworks linked in your application to get the Qt frameworks to be copied into the app bundle.

davecotter

do you mean this:

> cd <path_to>/Qt5_Source/build/debug
> ../../qt5/configure -developer-build -debug-and-release -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia
> make
> cd <path_to>/Qt5_Source/build/release
> ../../qt5/configure -prefix ./obj -opensource -nomake examples -nomake tests -confirm-license -feature qtbase -feature qtmultimedia
> make
> make install

what about 4. above?

SGaist

You should use more meaningful names for your folders. Your developer build is not just a debug build.
Using obj as prefix is really strange considering that this folder is going to contain a full Qt installation.

I missed that you used "feature". This a different thing. You do not need it right now. Currently you want to use the "-skip" parameter to avoid building certain qtXXX modules.

davecotter

believe me when i say i very much appreciate your bearing with me and continuing to answer my questions, but it's also true that you're assuming i have a lot of knowledge that you have, that i definitely don't have.

can you please spell out EXACTLY what the command lines should be for me to build both debug and release, and please include what you mean by "more meaningful names" because i do NOT know what you have in mind.

please would you be willing to just type up the command lines that you would use to do what i am trying to do, cuz i do not know what you mean. thanks...

davecotter

perhaps i can be more clear in my question.

what would you recommend for "meaningful names" ?
what name would you recommend in place of where i used "obj" ?
instead of using "feature" to include only the features i want, you suggest using "skip" to skip the features i do not want. how do i get a list of features that can go into "skip", and how do i know which ones i want to include on the "skip" line?

davecotter

pretty please? with <insert favorite indulgence> on top?

SGaist

use the Qt version in the name of folder. for example Qt_5_15_2_devel_build
at least the Qt version as above.
you are mixing modules and features. These are separate concepts. Skip everything you do not want to build.

davecotter

while i reiterate that i am very grateful for your continuing to try to help, i still would more appreciate explicit instructions, rather than hints.

i understand the socratic method, to answer a question with a question, to make me think, to hope to teach, to leave some to the student to try to figure out. sure. that has its place. but i think we could (i could) get a lot more done in a day if you could help by giving a concrete example. also you wouldn't have to keep coming back and giving me more hints. :) save us both some time.

so... i did take your hints and i've run as far as i can with them. i've tried to make MY directory layout look just like the one that comes with Qt Creator. My new commands are this:

> cd <path_to>/Qt5_Source
> git clone git://code.qt.io/qt/qt5.git
> mv ./qt5 ./Src
> cd Src
> git checkout 5.15.2
> perl init-repository --module-subset=default,-qtwebchannel,-qtwebengine,-qtwebglplugin,-qtwebsockets,-qtwebview,-qt3d,-qtcharts,-qtquick3d,-qtquickcontrols,-qtquickcontrols2,-qtquicktimeline
> cd ..
> mkdir build
> cd build
> ../Src/configure -prefix ../clang_64 -force-debug-info -debug-and-release -opensource -nomake examples -nomake tests -confirm-license
> make -j12
> make install

so, even though i did -force-debug-info and -debug-and-release, the .../Qt5_Source/clang_64/lib directory still does NOT contain any debug info files (.dSYM).

so my original question still is posed: how do i debug these guys?

again i BEG you: if any of my commands above are WRONG, please provide CORRECTED examples, not hints. as you can see, i'm NOT GOOD at deciphering hints, i much prefer instructions.

note that an end goal will be to have "qt.pro" (or whatever the right project(s) are) as a depencency of my own project, such that, in Qt Creator, i can edit code in any of the Qt Frameworks, and just hit run, and it will compile and stage the Qt stuff, then compile and link my project to that, and run my project.

thanks so much!

-dave

ps: unfortunately, also this happened after make install assembled a lot of stuff into bin:

cd qhelpgenerator/ && ( test -e Makefile || /Volumes/Developer/depot/Qt5_Source/build/qtbase/bin/qmake -o Makefile /Volumes/Developer/depot/Qt5_Source/Src/qttools/src/assistant/qhelpgenerator/qhelpgenerator.pro ) && /Applications/Xcode_10.3.app/Contents/Developer/usr/bin/make -f Makefile install

make[4]: *** No rule to make target `install'.  Stop.
make[3]: *** [sub-qhelpgenerator-install_subtargets] Error 2
make[2]: *** [sub-assistant-install_subtargets] Error 2
make[1]: *** [sub-src-install_subtargets] Error 2
make: *** [module-qttools-install_subtargets] Error 2

davecotter

okay, so after some more testing i see that i CAN in fact, now debug, and set breakpoints within the Qt code base. This is true even though i do not see any ".dSYM" files.

so this question is answered. thanks so much for your help. :D

not sure why QHelpGenerator failed to build, or what the consequences are, if any. if you have any ideas on that please let me know.

(also i apologize if helping me was frustrating, i'm doing my best and sometimes i have a hard time understanding stuff. but seems i got it in the end.)

SGaist

AFAIR (but might be wrong), the .dSYM file are generated when you do a "release with debug symbol" build.

I do not know for QHelpGenerator, the failure source is upper in the build log.

Glad you can debug as you wish :-)

davecotter

and how does one do a "release with debug symbols" build?

SGaist

If memory serves well, something like "-release -force-debug-info".

davecotter

if i do -release does that mean i do NOT do -debug-and-release? ie: are they mutually exclusive?

SGaist

I do not remember which one takes precedents over the other. You can try to mix debug-and-release with force-bebug-info.

davecotter

My final commands were:

cd /Volumes/Developer/depot/Qt5_Source
git clone git://code.qt.io/qt/qt5.git
mv ./qt5 ./Src
cd Src
git checkout 5.15.2
perl init-repository --module-subset=default,-qtwebengine,-qt3d,-qtcharts,-qtquick3d,-qtquickcontrols,-qtquickcontrols2,-qtquicktimeline
cd ..
mkdir build
cd build
../Src/configure -prefix ../clang_64 -force-debug-info -separate-debug-info -debug-and-release -opensource -nomake examples -nomake tests -confirm-license
make -j12
make -j1 install

no errors, and i had separate debug .dSYM files. haven't tested release yet.

By the way it took almost a week, half a dozen web pages, and almost two dozen back-and-forth replies in the forums to arrive at the above formula.

The fact that there is no such example just posted on the documentation web site is just stunning to me.

:)

davecotter

i take it back. now, all i did was change two strings in one file:
in the file avfvideorenderercontrol.mm i changed line 273 to read:

qWarning("Failed to activate video surface (OpenGL)");

and changed line 298 to read:

qWarning("Failed to activate video surface (QImage)");

Previously, they both had the same warning, so you could not know which one was hit by just seeing the console output.

then, i tried to compile that one module:

cd /Volumes/Developer/depot/Qt5_Source/build/qtmultimedia/src/plugins/avfoundation
make -j12
make install

and it SEEMED to do SOMETHING, no errors.
but now when i run my app, i can't make ANY breakpoints resolve, and the warning, when fired, does NOT contain my updated string.

i even then tried to make then make install from the root, but same problem: breakpoints don't resolve, can't debug into Qt frameworks :(

just FYI i have edited my kit->environment to have this line:

DYLD_IMAGE_SUFFIX=_debug

but that didn't help

SGaist

Is this your developer build ? If so there's no need to call make install.