Combobox in Qtableview

n-2204

@VRonin @mrjj
1.
Actually when I'm using both the ways to add values in Combobox
one thing happening ,if I added some values in column0 table1 then select in combobox and again adding values in table1 Column0 that time combobox selection go away

I am using dataChanged() signal
connect(ui.tableView->model(), &QAbstractItemModel::dataChanged, this,
&tool::rowvalue1);
Is it because of this signal ? how can i prevent this ??

As I'm using SLOT::rowvalue1() to add combobox in Qtableview
now how can i take index() of combobox as there is SIGNAL::QComboBox::currentIndexChanged, , so again I need to write SLOT for index
void tool::IndexChanged(int index)
{
combo->setCurrentIndex(combo->currentIndex());
//but combo will be inaccessible here ??
}
connect(combo, QOverload<int>::of(&QComboBox::currentIndexChanged), this,
&tool::IndexChanged);
Is this correct way ?

VRonin

@n-2204 said in Combobox in Qtableview:

Is it because of this signal ? how can i prevent this ??

It's because you recreate the entire list every time. You should just add/remove only the items that changed

You can use std::bind to forward the combo to the slot

void IndexChanged(int index, QComboBox* combo){
/// do stuff
}

connect(combo, QOverload<int>::of(&QComboBox::currentIndexChanged), this, std::bind(&tool::IndexChanged, this, std::placeholders::_1, combo));

n-2204

@VRonin
It's because you recreate the entire list every time. You should just add/remove only the items that changed
okay,, ya I'm using dataChanged signal , so i think whenever changes in table1 col0 values so combobox selection got affect

connect(ui.tableView->model(), &QAbstractItemModel::dataChanged, this,
&tool::rowvalue1);

So need to change in SIGNAL or anycondition to be add?
but I need to update data in combobox so datachanged signal must be used.
need to give condition in combobox ? or in SLOT something need to change or what else ??

VRonin

Instead of just doing

combo->model()->removeRows(0,combo->count(),combo->rootModelIndex()); // remove all items from the combo
combo->addItems(guesslist);  //add list to combobox

iterate over the items in the combo, remove those that don't appear in guesslist and add those that appear in guesslist but are not already in the combo

n-2204

to remove duplicates

guesslist.removeDuplicates(); // clear duplicates
guesslist.removeAll(QString(""));
combo->model()->removeRows(0,combo->count(),combo->rootModelIndex()); // remove all items from the combo
combo->addItems(guesslist);  //add list to combobox

remove those that don't appear in guesslist
--means using removerows() all items are removed everytime so this need to change ??

VRonin

@n-2204 said in Combobox in Qtableview:

all items are removed everytime so this need to change ??

Correct

n-2204

@VRonin Is removeItem() can be used ?

n-2204

@VRonin said in Combobox in Qtableview:
for (int r = 0, maxI = table1->rowCount(); r < maxI; ++r) { //for all value rows
guesslist.append( table1->data(table1->index(r, 0)).toString() );//store value in stringlist
}

guesslist is always updated,

for (int i = 0, maxI = table2->rowCount(); i < maxI; ++i)//for all rows
    {
        const QModelIndex idx = table2->index(i, 1);
        QComboBox* combo = qobject_cast<QComboBox*>(ui.tableView_2->indexWidget(idx));
        if (!combo)
          {
            combo = new QComboBox(); // make combo  
            ui.tableView_2->setIndexWidget(idx, combo);// add combo
        }
        colvallist1.removeDuplicates(); // strip dubs clear dublicates
        colvallist1.removeAll(QString(""));
        combo->setPlaceholderText(QString(" "));

        combo->addItems(guesslist); // adding gueslist will add item value everytime so no need to pass this right ??
combo->removeItem();

iterate over the items in the combo, remove those that don't appear in guesslist and add those that appear in guesslist but are not already in the combo

item should store in another Qstringlist and then check with initial list ?

n-2204

edited
In prev code i add these code lines, and now selection not changed when added new items in tableview column and updating in col combobox values

 for (int i = 0; i < guesslist.count(); i++) 
        {
            if (combo->findText(guesslist[i]) != -1)//-1 means "not found"
            { 
                continue;
            }
            else {
                combo->addItem(guesslist[i]); //Add to QCombobox
            }

but not able to apply for "remove those t don't appear in guesslist (when col1 row values chnaged)" ??

JonB

@n-2204
So you have to one of:

Have another loop/iterator through all the items which are in the combo box and remove any which are not in the guess list now; or
Clear out all the items in the combo box first, and then only add back in those which are now in guess list.

n-2204

@JonB said in Combobox in Qtableview:

Clear out all the items in the combo box first, and then only add back in those which are now in guess list.

when i'm clearing all first then, whatever my prev selection in combobox it will be gone 
 combo->clear();

Have another loop/iterator through all the items which are in the combo box and remove any which are not in the guess list now

tried this but not working correctly where to chnge ?,when I'm changing value in guesslist then the combo selection got changed

  QStringList itemsInComboBox;
            for (int index = 0; index < guesslist.count(); index++)
            {
                itemsInComboBox << combo->itemText(index);
                if ( guesslist[index]!=itemsInComboBox[index] )
                    combo->removeItem(index); 
            }

JonB

@n-2204 said in Combobox in Qtableview:

when i'm clearing all first then, whatever my prev selection in combobox it will be gone
combo->clear();

Yes, and, so? If you want to preserve what was selected, note it and reselect.

Your loop for removing is no good. For one thing, you only check the same index in both guess list and combo box. If you do not clear the items, implement what I wrote:

Have another loop/iterator through all the items which are in the combo box and remove any which are not in the guess list now

That is just basic algorithmic stuff.

n-2204

@JonB

Have another loop/iterator through all the items which are in the combo box and remove any which are not in the guess list now

I tired this but not working correctly.. now if item in guesslist then also it got removed ???

 QStringList itemsInComboBox;
     for (int index = 0; index < guesslist.count(); ++index) {  //check in list
        for (int item = 0; item < combo->count(); ++item) {  //check in combobox
            itemsInComboBox << combo->itemText(item);
            qDebug() << "before remove " << itemsInComboBox;
                      if ( guesslist[index] != itemsInComboBox[item]  )
                      combo->removeItem(item);
            }
        }

n-2204

Hi,
adding those that appear in guesslist code-

for (int i = 0; i < guesslist.count(); i++) 
    {
        if (combo->findText(guesslist[i]) != -1)//-1 means "not found"
        { 
            continue;
        }
        else {
            combo->addItem(guesslist[i]); //Add to QCombobox
        }

///remove which are not in the guess list code below I tried multiple times but this is not working correctly ? I don't want to change my selection when any item added / removed / replaced ..Plz help😞

QStringList itemsInComboBox;
 for (int index = 0; index < guesslist.count(); ++index) {  //check in list
    for (int item = 0; item < combo->count(); ++item) {  //check in combobox
        itemsInComboBox << combo->itemText(item);
        qDebug() << "before remove " << itemsInComboBox;
                  if ( guesslist[index] != itemsInComboBox[item]  )
                  combo->removeItem(item);
        }
     }

Thanks in advance

n-2204

Have another loop/iterator through all the items which are in the combo box and remove any which are not in the guess list now

for me this way is not working any how selection of combobox is going away..
how can i store the selection of combobox ?

artwaw

@n-2204 https://doc.qt.io/qt-5/qcombobox.html#currentIndex-prop or currentText() if you can't relay on the order of the items or itemData() if you use roles, later on you can find the same text with different index, if that's the case, using findText() or findData().

Do you read any documentation at all? It's all there in clear text.

JonB

@n-2204
The whole thing, for what I think you say you want:

QString selected = combo->currentText();
combo->clear();
combo->addItems(guesslist);
combo->setCurrentText(selected);

n-2204

@JonB said in Combobox in Qtableview:

The whole thing, for what I think you say you want:

QString selected = combo->currentText();
combo->clear();
combo->addItems(guesslist);
combo->setCurrentText(selected);
edited
thanks it works,, there some other mistake in code

n-2204

@artwaw said in Combobox in Qtableview:
currentText() if you can't relay on the order of the items or itemData() if you use roles, later on you can find the same text with different index, if that's the case, using findText() or findData().

Do you read any documentation at all? It's all there in clear text.

Thanks,,i trying to implement but thing is removeitem+selection from combobox not working correctly

JonB

@n-2204 said in Combobox in Qtableview:

currentText() if you can't relay on the order of the items or itemData() if you use roles, later on you can find the same text with different index, if that's the case, using findText() or findData().

From my code all you need to restore the selection is the combo->setCurrentText(selected);.