3D Install Qt6

ofmrew

@ofmrew Sorry but the previous post was sent prematurly. It shoyuuld have said the I was setting Command Prompt for ming81_64 by adding c:\Qt\6.0.2\ming81_64 to PATH, but g++ --version is not recognized. What am I doing wrong?

SGaist

IIRC, Qt provides a set of shortcut for command prompts preconfigured for use. You should use these.

As for your PATH changes, did you check where exactly g++ is located ?

ofmrew

@SGaist I am learning more than I never wanted to know about Linux and Win 10. Back in 1990 when I was at the announcement of Win NT I would have loved this stuff, but now I just want to program 3D graphics.

I searched for g++ and did not find it, but I did find a number of g++ prefixed by a compiler.
Does the Installer actually install mingw or just a module, i.e., do I need to install mingw64 on my computer. One post in stackoverflow "https://stackoverflow.com/questions/22873884/how-do-i-run-configure-with-mingw" states that both mingw and msys must be installed. I that correct? If so, then do I follow the steps that post suggest?

SGaist

You do not need to install MinGW independently. The online installer as well as the Maintenance Tool gives you the option to install the version used for the pre-built binaries.

ofmrew

@SGaist What about Msys does that need to be installed?

SGaist

No, it does not.

ofmrew

@SGaist I find that I have multiple mingw and msys installed, some dating back 6 years. I believe tha I need to clean my computer and start with a fresh installation.

ofmrew

@ofmrew Back to Mint Linux. I found an Internet post on how to test the Vulkan installataion: https://linuxconfig.org/install-and-test-vulkan-on-linux. I installed Steam and DoTA 2. It seemed to run without a problem. So now I am really confused about the conan message: /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp: In lambda function:
/home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf/src/render/surfaces/vulkaninstance.cpp:54:34: error: invalid use of incomplete type ‘class QVulkanInstance’
54 | QVulkanInstance* v = new QVulkanInstance;

It occurred at: [ 48%] Building CXX object src/render/CMakeFiles/3DRender.dir/surfaces/vulkaninstance.cpp.o

The final part of the log:
make: *** [Makefile:144: all] Error 2
qt3d/6.0.1@qt/final:
qt3d/6.0.1@qt/final: ERROR: Package '9105b5b4ab5d474532cfc28699da368141e8a4cf' build failed
qt3d/6.0.1@qt/final: WARN: Build folder /home/bob/.conan/data/qt3d/6.0.1/qt/final/build/9105b5b4ab5d474532cfc28699da368141e8a4cf
ERROR: qt3d/6.0.1@qt/final: Error in build() method, line 121
self.run('cmake --build . %s' % cmake.build_config)
ConanException: Error 2 while executing cmake --build .
If the Vulkan game DoTA runs, which implies that Vulkan is correctly installed, then (1) is it a bug or is there an error in my statement:
export PATH=/home/bob/Qt/Tools/bin:/home/bob/Qt/Tools/Conan:/home/bob/Qt/Tools/Ninja:$PATH
cd /home/bob/Qt/Conan3D
conan install qt3d/6.0.1@qt/final --build=missing --profile=/home/bob/Qt/Tools/Conan/profiles/'''qt-6.0.1-gcc-x86_64''' -s build_type=Release -g=qmake -g qmake_paths -g cmake_paths -g=cmake -g deploy

What is my next move?

SGaist

No include missing from that file ?

ofmrew

@SGaist That does not answer my question: If the include file is missing is it my fault or a bug? Your reply of No gives me no hint as what I should do. What should I do?

SGaist

I meant is there any include statement missing from that file ? It should not but who knows.

ofmrew

@SGaist I looked but I could not see any problem. I was about to run a validation on the installation of Valkan, but then I used the maintenance tool to get the latest. There seems to be that some files are out of synch, for example qt3d/6.0.1@qt/final is required but then --profile=/home/bob/Qt/Tools/Conan/profiles/'''qt-6.0.2-gcc-x86_64''' is required. Now I get:

conan install qt3d/6.0.1@qt/final --build=missing --profile=/home/bob/Qt/Tools/Conan/profiles/'''qt-6.0.2-gcc-x86_64''' -s build_type=Release -g cmake_paths -g=cmake -g deploy
Configuration:
[settings]
arch=x86_64
build_type=Release
compiler=gcc
compiler.libcxx=libstdc++11
compiler.version=7.5
os=Linux
[options]
qt6=6.0.2
[build_requires]
[env]
QT_PATH=/home/bob/Qt/6.0.2/gcc_64
qt3d/6.0.1@qt/final is locked by another concurrent conan process, wait...
If not the case, quit, and do 'conan remove --locks', which does nothing!

MY question is: has anyone actually downloaded qt63d and got it to work, for me neither win 10 nor mint linux has been successful.

Maybe someone should look at this!

ofmrew

@ofmrew It looks like the Vilkan SDK is bad, vkvia will not work; however, both vkcube and vulkaninfo work. Looks like it is my problem!

ofmrew

@ofmrew I think I found the problem:
Vulkan Configurator
Vulkan Development Status:

Layers override: "Validation" configuration
$VULKAN_SDK environment variable not set
Could not find a Vulkan Loader.
However, this is where my lack of Linux skills is killing me: I am not sure how to permanently set the environment variables. I have easily set then in Windows 10, but my use of vi was last in 1990 and even then my skills were only marginal. I would appreciate some help.

SGaist

You can edit the .profile file in your home directory.

Some more information here.

ofmrew

@SGaist Thanks very much, that is more readable than the information that I found on the internet.

ofmrew

@ofmrew New problem:
qt3d/6.0.1@qt/final is locked by another concurrent conan process, wait...
If not the case, quit, and do 'conan remove --locks'

quit
conan remove --locks

What is this and how do I get past it?

SGaist

I wonder if related to this Conan bug ?

Maybe clearing the cache might help.

ofmrew

Back to win 10 3D install. For anyone that might wonder how to execute conan on win 10: click the start button, then type cmd and you should see an option like Qt 6.02 (MinGW 8.1.0 64-bit) select it and you will have the correct Command Prompt.

I got past finding Vulkan, but then:
-- Found Vulkan: C:/VulkanSDK/1.2.170.0/Lib/vulkan-1.lib
-- Could NOT find OpenSSL, try to set the path to OpenSSL root folder in the system variable OPENSSL_ROOT_DIR (missing: OPENSSL_CRYPTO_LIBRARY OPENSSL_INCLUDE_DIR)
-- Could NOT find WrapOpenSSLHeaders (missing: WrapOpenSSLHeaders_FOUND)
-- Could NOT find Qt6Gamepad (missing: Qt6Gamepad_DIR)
-- Could NOT find Qt6ShaderTools (missing: Qt6ShaderTools_DIR)
-- Check for feature set changes
CMake Error at C:/Qt/6.0.2/mingw81_64/lib/cmake/Qt6/QtSyncQtHelpers.cmake:7 (message):
Perl needs to be available to build Qt.
Call Stack (most recent call first):
C:/Qt/6.0.2/mingw81_64/lib/cmake/Qt6/QtSyncQtHelpers.cmake:12 (qt_ensure_perl)
C:/Qt/6.0.2/mingw81_64/lib/cmake/Qt6/QtModuleHelpers.cmake:194 (qt_ensure_sync_qt)
src/core/CMakeLists.txt:7 (qt_internal_add_module)

-- Configuring incomplete, errors occurred!
See also "C:/Users/rwill/.conan/data/qt3d/6.0.1/qt/final/build/0f29c7292f66ab3b189fa2809bdfcf230d253f0f/CMakeFiles/CMakeOutput.log".
qt3d/6.0.1@qt/final:
qt3d/6.0.1@qt/final: ERROR: Package '0f29c7292f66ab3b189fa2809bdfcf230d253f0f' build failed
qt3d/6.0.1@qt/final: WARN: Build folder C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f
ERROR: qt3d/6.0.1@qt/final: Error in build() method, line 120
self.run('%s "%s" %s' % (self._get_qtcmake(), self.source_folder, cmake.command_line))
ConanException: Error 1 while executing C:\Qt\6.0.2\mingw81_64\bin\qt-cmake.bat "C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f" -G "MinGW Makefiles" -DCMAKE_BUILD_TYPE="Release" -DCONAN_IN_LOCAL_CACHE="ON" -DCONAN_COMPILER="gcc" -DCONAN_COMPILER_VERSION="5" -DCONAN_CXX_FLAGS="-m64" -DCONAN_SHARED_LINKER_FLAGS="-m64" -DCONAN_C_FLAGS="-m64" -DCONAN_LIBCXX="libstdc++11" -DBUILD_SHARED_LIBS="OFF" -DCMAKE_INSTALL_PREFIX="C:\Users\rwill.conan\data\qt3d\6.0.1\qt\final\build\0f29c7292f66ab3b189fa2809bdfcf230d253f0f_install_tmp" -DCMAKE_INSTALL_BINDIR="bin" -DCMAKE_INSTALL_SBINDIR="bin" -DCMAKE_INSTALL_LIBEXECDIR="bin" -DCMAKE_INSTALL_LIBDIR="lib" -DCMAKE_INSTALL_INCLUDEDIR="include" -DCMAKE_INSTALL_OLDINCLUDEDIR="include" -DCMAKE_INSTALL_DATAROOTDIR="share" -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY="ON" -DCONAN_EXPORTED="1" -DCMAKE_VERBOSE_MAKEFILE="ON" -Wno-dev

Look like I am missing OpenSSL and Perl. Do I need to install those or should they have been installed? Making some progress!

SGaist

Neither is installed as Perl is needed when building from git and OpenSSL has export restrictions is some countries so the software creator shall handle it. You can grab OpenSSL through Qt's maintenance tool.