Error on Qt 6 Building from source for Windows Based

Lemat

i tried with cmake 3.19.3, problem still exist

SGaist

Did you restart from a clean state ?

Lemat

@SGaist yes. i did it. but the problem still exist

SGaist

What did you do to ensure a clean state ?

Lemat

I Installed Qt 6.0.1 with the online Installer. Too bad for me. Many features such as QWebEngine are removed

eyllanesc

@Lemat That and other modules will be added in the new versions during the year, read https://www.qt.io/blog/add-on-support-in-qt-6.0-and-beyond. So you have 2 options: 1) wait or 2) manually compile the modules

Lemat

@eyllanesc ,that is okay !. i just leaned on doc.qt.io. Waiting is the best option for me after failing on this subject title. laugh.

Christian Ehrlicher

Use 5.15 and you're fine. Don't know why everyone needs to use Qt6 when it's documented that it's not feature complete... Qt6 does not have any advantage for an average user at the current state.

Chris Kawa

This is the do_it.bat I'm using to build Qt6. Adjust the paths and configure options at the top to whatever you like. You only need to have CMake in PATH, nothing else, or you can just spell out its path right in the bat script.

SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio 2019\VC\Auxiliary\Build\vcvars64.bat"
SET SRC_DIR="C:\Qt\6.0.1\Src"
SET BUILD_DIR="C:\Qt\6.0.1\Build"
SET INSTALL_DIR="C:\Qt\6.0.1\msvc2019_64"
SET CONFIGURE_OPTIONS=-debug-and-release -mp -opensource -confirm-license

call %VS_ENVIRONMENT%
mkdir %BUILD_DIR%
mkdir %INSTALL_DIR%
cd %BUILD_DIR%
call %SRC_DIR%\configure -prefix %INSTALL_DIR% %CONFIGURE_OPTIONS%
cmake --build . --parallel
cmake --install .
cmake --install . --config Debug
cd %INSTALL_DIR%
rmdir %BUILD_DIR% /Q /S
pause

This builds Qt out of source (the only sane way to do it cleanly), copies result to the install directory and removes the temporary build directory (which can get huuuge if you're building everything).

Some notes on the discussion points above:

Depending on your version of VS (Pro, Cmmunity etc.) the VS install dir will look a bit different. If in doubt just find "x64 Native Tools Command Prompt for VS 2019" shortcut in your start menu and see where it points to
There are couple of different .bats to set VS environment. For x64 build use either vcvarsall.bat amd64 or a shortcut vcvars64.bat
Keep source and build directories next to each other e.g. <some path>\src and <some path>\build. Theoretically it should be possible to build out of source to anywhere, but I've had multiple problems with mismatched number of .. and the likes in the past so keep it this way just to make it easier for yourself.
It's a good idea to exclude whichever modules you don't need in configure options e.g. -skip qtdatavis3d. I usually use only about 3-5 modules and exclude everything else, which cuts down compilation time and output size immensely.

Lemat

@Christian-Ehrlicher you are right !

Lemat

@Chris-Kawa thanks. interesting to try !.

NiVa99

Hi,

Trying do_it.bat with VS2019 and Qt source 6.2.2 for x64 binaries (or following Qt Buidling from source) directives,
I got these errors:

Can you help me ?

Thank you
NiVa

Either set CMAKE_PREFIX_PATH or LLVM_INSTALL_DIR to the location of your llvm installation.
On Linux systems, you may be able to install libclang by installing the libclang-dev or libclang-devel package, depending on your distribution.
On macOS, you can use Homebrew's llvm package.
You will also need to set the FEATURE_clang CMake variable to ON to re-evaluate this check.
WARNING: Clang-based lupdate parser will not be available. LLVM and Clang C++ libraries have not been found.
You will need to set the FEATURE_clangcpp CMake variable to ON to re-evaluate this check.
WARNING: QtWebEngine won't be built. Tool gperf is required.
WARNING: QtPdf won't be built. Tool gperf is required.

Qt is now configured for building. Just run 'cmake --build . --parallel'

Once everything is built, you must run 'ninja install'
Qt will be installed into 'C:/Qt/6.2.2/msvc2019_64'

To configure and build other Qt modules, you can use the following convenience script:
        C:/Qt/6.2.2/msvc2019_64/bin/qt-configure-module.bat

If reconfiguration fails for some reason, try to remove 'CMakeCache.txt' from the build directory

-- Configuring incomplete, errors occurred!
See also "C:/Qt/6.2.2/Build/CMakeFiles/CMakeOutput.log".
See also "C:/Qt/6.2.2/Build/CMakeFiles/CMakeError.log".
CMake Error at C:/Qt/6.2.2/src/qtbase/cmake/QtProcessConfigureArgs.cmake:947 (message):
  CMake exited with code 1.


ninja: error: loading 'build.ninja': Le fichier spÚcifiÚ est introuvable.

CMake Error: Error processing file: C:/Qt/6.2.2/Build/cmake_install.cmake

Notice that directory C:/Qt/6.2.2/Build disappear at this moment building.
Here is and extract of CMakeError :

Performing C++ SOURCE FILE Test HAVE_ICONV failed with the following output:
Change Dir: C:/Qt/6.2.2/Build/CMakeFiles/CMakeTmp

Run Build Command(s):C:/ninja-win/ninja.exe -f build-Release.ninja cmTC_50daa && [1/2] Building CXX object CMakeFiles/cmTC_50daa.dir/Release/src.cxx.obj

[2/2] Linking CXX executable Release\cmTC_50daa.exe

FAILED: Release/cmTC_50daa.exe 

cmd.exe /C "cd . && C:\Strawberry\c\bin\c++.exe -DNDEBUG -O2  CMakeFiles/cmTC_50daa.dir/Release/src.cxx.obj -o Release\cmTC_50daa.exe -Wl,--out-implib,Release\libcmTC_50daa.dll.a -Wl,--major-image-version,0,--minor-image-version,0  -lkernel32 -luser32 -lgdi32 -lwinspool -lshell32 -lole32 -loleaut32 -luuid -lcomdlg32 -ladvapi32 && cd ."

C:/Strawberry/c/bin/../lib/gcc/x86_64-w64-mingw32/8.3.0/../../../../x86_64-w64-mingw32/bin/ld.exe: C:/Strawberry/c/bin/../lib/gcc/x86_64-w64-mingw32/8.3.0/../../../../x86_64-w64-mingw32/lib/../lib/libiconv.a(localcharset.o):localcharset.c:(.text+0x63): undefined reference to `__imp_GetACP'

collect2.exe: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.



Source file was:
#include <iconv.h>

int main(int, char **)
{
    iconv_t x = iconv_open("", "");
    iconv_close(x);
    return 0;
}
Performing C++ SOURCE FILE Test HAVE_ICONV_WITH_LIB failed with the following output:
Change Dir: C:/Qt/6.2.2/Build/CMakeFiles/CMakeTmp

Run Build Command(s):C:/ninja-win/ninja.exe -f build-Release.ninja cmTC_67c23 && [1/2] Building CXX object CMakeFiles/cmTC_67c23.dir/Release/src.cxx.obj

[2/2] Linking CXX executable Release\cmTC_67c23.exe

FAILED: Release/cmTC_67c23.exe 

cmd.exe /C "cd . && C:\Strawberry\c\bin\c++.exe -DNDEBUG -O2  CMakeFiles/cmTC_67c23.dir/Release/src.cxx.obj -o Release\cmTC_67c23.exe -Wl,--out-implib,Release\libcmTC_67c23.dll.a -Wl,--major-image-version,0,--minor-image-version,0  -lkernel32 -luser32 -lgdi32 -lwinspool -lshell32 -lole32 -loleaut32 -luuid -lcomdlg32 -ladvapi32 && cd ."

C:/Strawberry/c/bin/../lib/gcc/x86_64-w64-mingw32/8.3.0/../../../../x86_64-w64-mingw32/bin/ld.exe: C:/Strawberry/c/bin/../lib/gcc/x86_64-w64-mingw32/8.3.0/../../../../x86_64-w64-mingw32/lib/../lib/libiconv.a(localcharset.o):localcharset.c:(.text+0x63): undefined reference to `__imp_GetACP'

collect2.exe: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.



Source file was:
#include <iconv.h>

int main(int, char **)
{
    iconv_t x = iconv_open("", "");
    iconv_close(x);
    return 0;
}
Performing C++ SOURCE FILE Test HAVE_uacpp failed with the following output:
Change Dir: C:/Qt/6.2.2/Build/CMakeFiles/CMakeTmp

Run Build Command(s):C:/ninja-win/ninja.exe -f build-Release.ninja cmTC_ab42c && [1/2] Building CXX object CMakeFiles/cmTC_ab42c.dir/Release/src.cxx.obj

FAILED: CMakeFiles/cmTC_ab42c.dir/Release/src.cxx.obj 

C:\Strawberry\c\bin\c++.exe -DHAVE_uacpp -DCMAKE_INTDIR=\"Release\"  -DNDEBUG -O2 -std=gnu++17 -o CMakeFiles/cmTC_ab42c.dir/Release/src.cxx.obj -c C:/Qt/6.2.2/Build/CMakeFiles/CMakeTmp/src.cxx

C:/Qt/6.2.2/Build/CMakeFiles/CMakeTmp/src.cxx:3:10: fatal error: uaplatformlayer.h: No such file or directory
 #include <uaplatformlayer.h>
          ^~~~~~~~~~~~~~~~~~~
compilation terminated.

ninja: build stopped: subcommand failed.



Source file was:
 #include <stdio.h>

#include <uaplatformlayer.h>
#include <uastring.h>
#include <uasession.h>

using namespace UaClientSdk;

int main(int /*argc*/, char ** /*argv*/)
{

    UaPlatformLayer::init();
    UaSession *session = new UaSession;

    UaPlatformLayer::cleanup();
    return 0;
}

Chris Kawa

@NiVa99 The bat is explicitly for msvc. Your errors seem to come from using clang without environment set up for it. The path has msvc2019_64 in it and your build errors are from gcc/mingw.

You seem to have completely mixed up environment for those three different compilers. Which one do you actually want to use - msvc, clang or gcc/mingw ?

Notice that directory C:/Qt/6.2.2/Build disappear at this moment building.

Well yeah, because it's a temporary build directory and the bat removes it after the install: rmdir %BUILD_DIR% /Q /S. If you want it to stay just modify the bat and remove or comment out that line.

NiVa99

I have succeeded to build Qt6.2.2 for arch amd64 and x64 with this following bat.
But interested in to build with mingw too

:: x64 amd64 x86
SET ARCH=x86


:: SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvars64.bat"
SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat %ARCH%"
CALL %VS_ENVIRONMENT%

SET SRC_DIR="d:\Logiciels\Qt\6.2.2\Src"
SET BUILD_DIR="d:\Logiciels\Qt\6.2.2\Build"
SET INSTALL_DIR="C:\release-vs2019-%ARCH%"
SET CONFIGURE_OPTIONS=-debug-and-release -mp -opensource -confirm-license

call %VS_ENVIRONMENT%
mkdir %BUILD_DIR%
mkdir %INSTALL_DIR%
cd %BUILD_DIR%
call %SRC_DIR%\configure -prefix %INSTALL_DIR% %CONFIGURE_OPTIONS%
cmake --build . --parallel
cmake --install .
cd %INSTALL_DIR%
rmdir %BUILD_DIR% /Q /S
pause

Chris Kawa

For mingw don't call the msvc bat to setup environment. I don't know if mingw has a handy bat to set it up for you, but if not then just do it manually by adding the relevant paths to bin, include and lib directories. Something like this

SET PATH=%PATH%;C:\mingw\bin
SET CPLUS_INCLUDE_PATH=C:\mingw\include
SET LIBRARY_PATH=C:\mingw\lib

substituting the paths to your actual mingw installation directories.

NiVa99

Thank you, I have removed rmdir line and I will try mingw build.

Just staying on msvc build, I have just one architecture x86 that does not build either than amd64 dll seeing it with Dependencies.

d:\Logiciels\Qt\6.2.2>SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat x86"

d:\Logiciels\Qt\6.2.2>"C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat x86"
'"C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat x86"' n’est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.

d:\Logiciels\Qt\6.2.2>SET SRC_DIR="d:\Logiciels\Qt\6.2.2\Src"

d:\Logiciels\Qt\6.2.2>SET BUILD_DIR="d:\Logiciels\Qt\6.2.2\Build"

d:\Logiciels\Qt\6.2.2>SET INSTALL_DIR="C:\release-vs2019-x86"

d:\Logiciels\Qt\6.2.2>SET CONFIGURE_OPTIONS=-debug-and-release -mp -opensource -confirm-license

d:\Logiciels\Qt\6.2.2>call "C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat x86"
'"C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat x86"' n’est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.

d:\Logiciels\Qt\6.2.2>mkdir "d:\Logiciels\Qt\6.2.2\Build"
Un sous-répertoire ou un fichier d:\Logiciels\Qt\6.2.2\Build existe déjà.

d:\Logiciels\Qt\6.2.2>mkdir "C:\release-vs2019-x86"
Un sous-répertoire ou un fichier C:\release-vs2019-x86 existe déjà.

d:\Logiciels\Qt\6.2.2>cd "d:\Logiciels\Qt\6.2.2\Build"

d:\Logiciels\Qt\6.2.2\Build>call "d:\Logiciels\Qt\6.2.2\Src"\configure -prefix "C:\release-vs2019-x86" -debug-and-release -mp -opensource -confirm-license
+ cd qtbase
+ d:\Logiciels\Qt\6.2.2\src\qtbase\configure.bat -top-level -prefix "C:\release-vs2019-x86" -debug-and-release -mp -opensource -confirm-license

Chris Kawa

'"C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat x86"' n’est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.

Don't put x86 in the quotes because it treats vcvarsall.bat x86 as a file name with space. Put the parameter outside of the quotes. It's the same for all architectures. You can also just use vcvars32.bat without any parameters, which does the same.

NiVa99

I am trying this version of bat.

:: x64 amd64 x86

:: SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvars64.bat"
SET ARCH=x86
:: SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvarsall.bat %ARCH%"

SET VS_ENVIRONMENT="C:\Program Files (x86)\Microsoft Visual Studio\2019\Professional\VC\Auxiliary\Build\vcvars32.bat"
CALL %VS_ENVIRONMENT%

SET SRC_DIR="d:\Logiciels\Qt\6.2.2\Src"
SET BUILD_DIR="d:\Logiciels\Qt\6.2.2\Build"
SET INSTALL_DIR="d:\Qt-6.2.2-release-vs2019-%ARCH%"
SET CONFIGURE_OPTIONS=-debug-and-release -mp -opensource -confirm-license

mkdir %BUILD_DIR%
mkdir %INSTALL_DIR%
cd %BUILD_DIR%
CALL %SRC_DIR%\configure -prefix %INSTALL_DIR% %CONFIGURE_OPTIONS%
cmake --build . --parallel 4
cmake --install .
:: cd %INSTALL_DIR%
:: rmdir %BUILD_DIR% /Q /S
pause

which cause errors

Performing C++ SOURCE FILE Test HAVE_WIN10_WIN32_WINNT failed with the following output:
Change Dir: D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp

Run Build Command(s):C:/ninja-win/ninja.exe -f build-Release.ninja cmTC_4e432 && [1/2] Building CXX object CMakeFiles/cmTC_4e432.dir/Release/src.cxx.obj

**FAILED**: CMakeFiles/cmTC_4e432.dir/Release/src.cxx.obj 

C:\Strawberry\c\bin\c++.exe -DHAVE_WIN10_WIN32_WINNT -DCMAKE_INTDIR=\"Release\"  -O3 -DNDEBUG -std=gnu++17 -o CMakeFiles/cmTC_4e432.dir/Release/src.cxx.obj -c D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp/src.cxx

D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp/src.cxx:6:10: error: #error "_WIN32_WINNT version too low"
         #error "_WIN32_WINNT version too low"
          ^~~~~
D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp/src.cxx:9:10: error: #error "WINVER version too low"
         #error "WINVER version too low"
          ^~~~~
ninja: build stopped: subcommand failed.



Source file was:
        #include <windows.h>
        #if !defined(_WIN32_WINNT) && !defined(WINVER)
        #error "_WIN32_WINNT and WINVER are not defined"
        #endif
        #if defined(_WIN32_WINNT) && (_WIN32_WINNT < 0x0A00)
        #error "_WIN32_WINNT version too low"
        #endif
        #if defined(WINVER) && (WINVER < 0x0A00)
        #error "WINVER version too low"
        #endif
        int main() { return 0; }
    
Performing C++ SOURCE FILE Test TEST_use_lld_linker failed with the following output:
Change Dir: D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp

Run Build Command(s):C:/ninja-win/ninja.exe -f build-Release.ninja cmTC_01c1b && [1/2] Building CXX object CMakeFiles/cmTC_01c1b.dir/Release/src.cxx.obj

**FAILED**: CMakeFiles/cmTC_01c1b.dir/Release/src.cxx.obj 

C:\Strawberry\c\bin\c++.exe -DTEST_use_lld_linker -DCMAKE_INTDIR=\"Release\"  -O3 -DNDEBUG   -fuse-ld=lld -std=gnu++17 -o CMakeFiles/cmTC_01c1b.dir/Release/src.cxx.obj -c D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp/src.cxx

c++.exe: error: unrecognized command line option '-fuse-ld=lld'; did you mean '-fuse-ld=bfd'?
ninja: build stopped: subcommand failed.



Source file was:
int main() { return 0; }
Performing C++ SOURCE FILE Test TEST_enable_new_dtags failed with the following output:
Change Dir: D:/Logiciels/Qt/6.2.2/Build/CMakeFiles/CMakeTmp

Run Build Command(s):C:/ninja-win/ninja.exe -f build-Release.ninja cmTC_ea62a && [1/2] Building CXX object CMakeFiles/cmTC_ea62a.dir/Release/src.cxx.obj

[2/2] Linking CXX executable Release\cmTC_ea62a.exe

FAILED: Release/cmTC_ea62a.exe 

cmd.exe /C "cd . && C:\Strawberry\c\bin\c++.exe -O3 -DNDEBUG -Wl,--enable-new-dtags CMakeFiles/cmTC_ea62a.dir/Release/src.cxx.obj -o Release\cmTC_ea62a.exe -Wl,--out-implib,Release\libcmTC_ea62a.dll.a -Wl,--major-image-version,0,--minor-image-version,0  -lkernel32 -luser32 -lgdi32 -lwinspool -lshell32 -lole32 -loleaut32 -luuid -lcomdlg32 -ladvapi32 && cd ."

C:/Strawberry/c/bin/../lib/gcc/x86_64-w64-mingw32/8.3.0/../../../../x86_64-w64-mingw32/bin/ld.exe: unrecognized option '--enable-new-dtags'

C:/Strawberry/c/bin/../lib/gcc/x86_64-w64-mingw32/8.3.0/../../../../x86_64-w64-mingw32/bin/ld.exe: use the --help option for usage information

collect2.exe: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.

Chris Kawa

The error tells you what's wrong. Mingw sets _WIN32_WINNT and WINVER too low. I think Windows XP is its default and Qt6 requires at least Windows 10, so add defines for the appropriate versions in the configure params. Here are the values: WINVER and _WIN32_WINNT.

NiVa99

This post is deleted!