Two way comms via socket?

[SPlatten]

@KroMignon , Process B is using QTcpSocket, Process A is listening with QTcpServer. A is only sending the Ack, B is only sending the HB.

Part of Process A is to identify the type of message received, it then calls a function pointer specific to the decode type, in the case of HB:

bool blnDecodeHeartbeat(const QJsonObject& crobjJSON, QTcpSocket* psckReceiver) {
    clsModule* pModule = pDecodeSource(crobjJSON);
    if ( pModule != nullptr ) {
        pModule->updateHearbeat();
    //Extract the message type from the message
        qdbg() << "blnDecodeHeartbeat: " << QJsonDocument(crobjJSON).toJson(QJsonDocument::Compact);
        emit pModule->sendAck(crobjJSON, psckReceiver);
        return true;
    }
    return false;
}

The sendAck signal is connected to the onSendAck slot:

void clsModule::onSendAck(const QJsonObject& crobjJSON, QTcpSocket* psckReceiver) {
    QJsonObject objAck(crobjJSON);
    QJsonObject::const_iterator citrFound = crobjJSON.find(clsJSON::mscszMsgType);

    if ( citrFound != crobjJSON.end() ) {
        QString strAck(clsJSON::mscszAck + citrFound.value().toString());
        objAck.insert(clsJSON::mscszMsgType, strAck);
        objAck.insert(clsJSON::mscszAddrTo, clsJSON::mscszXMLMPAM);
qdbg() << "clsModule::onSendAck: " << QJsonDocument(objAck).toJson(QJsonDocument::Compact);
        if ( mblnReady != true ) {
            sendLater(cstrGetAlias(), objAck);
        } else if ( psckReceiver != nullptr
                 && psckReceiver->state() == QAbstractSocket::ConnectedState ) {
            QByteArray arybytMsg;
            arybytMsg = QJsonDocument(objAck).toJson(QJsonDocument::Compact);
            psckReceiver->write(arybytMsg);
        }
    }
}

[KroMignon]

@SPlatten said in Two way comms via socket?:

Process B is using QTcpSocket, Process A is listening with QTcpServer. A is only sending the Ack, B is only sending the HB.

According to TCP socket sniffer, I am pretty sure you are echoing the received message somewhere else, before calling blnDecodeHeartbeat().

[SPlatten]

@KroMignon , the only place that qdbg() sends the data to is to the Application Output and the log files. I'm pretty sure that process A isn't responsible for the HB Json message in the received buffer.

[KroMignon]

@SPlatten said in Two way comms via socket?:

I'm pretty sure that process A isn't responsible for the HB Json message in the received buffer.

I don't know your software, but I often use QTcpServer, QTcpSocket und QUdpSocket on Windows/Linux/Android systems with Qt 5.4 up to 5.12.
I am sure they don't send themselves data, if B receiving data from A, then A have sent them and there is somewhere in the application a QTcpSocket::write() call.

So up to you the search all write() calls in the application source code.
I am also sure that if you comment out psckReceiver->write(arybytMsg); you will also get the request echoed on B.

[SPlatten]

@KroMignon , Process A is listening to QHostAddress::Any on port 8123, Process B is connecting to the localhost IP address and port 8123. Both processes are sending data to the same address and port, so what's stopping Process A from receiving its own traffic which seems to be the case?

I've now added an addrTo field in the JSON packets which allows the receivers to identify if the packet is addressed to the receiver or not.

[Edit] Just found the bug, I was indeed echoing back the received data from my decoder. Thank you for your help.

[KroMignon]

@SPlatten said in Two way comms via socket?:

, Process A is listening to QHostAddress::Any on port 8123, Process B is connecting to the localhost IP address and port 8123. Both processes are sending data to the same address and port, so what's stopping Process A from receiving its own traffic which seems to be the case?

You are using TCP sockets, TCP is an unicast protocol. There is no chance of receiving data from outside. With UDP socket you could send data to any open UDP port, but you are using TCP. So you need to be connected to be able to send data on the socket.

The TCP server socket may listen on any IP address, but when TCP client is connected, then the connection is between 2 endpoints (IP Adress + TCP port number):

• one for the client side
• one for the server side

And each endpoint is hold by a QTcpSocket instance, once again you can only receive what you are sending. And only the connected endpoints can send data.

Like Sherlock Holmes (aka Arthur Conan Doyle) say: "It is an old maxim of mine that when you have excluded the impossible, whatever remains, however improbable, must be the truth."

[SPlatten]

@KroMignon , the next issue I have is that having sorted this issue.

Process A is listening for messages on any local address on port 8123
Process B sends a message to A.
Process A receives the message and responds with an acknowledge message, I can see from the signals that the bytesWritten matches the message length.

But Process B isn't receiving the message from A, what could explain this?

This is the decode that Process A uses for the received message and sends the response:

bool blnDecodeHeartbeat(const QJsonObject& crobjJSON, QTcpSocket* psckReceiver) {
    clsModule* pModule = pDecodeSource(crobjJSON);
    if ( pModule != nullptr ) {
        pModule->updateHearbeat();
    //Extract the message type from the message
        qdbg() << "blnDecodeHeartbeat: " << QJsonDocument(crobjJSON).toJson(QJsonDocument::Compact);
        emit pModule->sendAck(crobjJSON, psckReceiver);
        return true;
    }
    return false;
}

sendAck is a signal connected to slot:

void clsModule::onSendAck(const QJsonObject& crobjJSON, QTcpSocket* psckReceiver) {
    QJsonObject::const_iterator citrFound = crobjJSON.find(clsJSON::mscszMsgType);

    if ( citrFound == crobjJSON.end() ) {
        return;
    }
    QString strAck(clsJSON::mscszAck + citrFound.value().toString());
    QJsonObject objAck;
    objAck.insert(clsJSON::mscszAddrTo, cstrGetAlias());
    objAck.insert(clsJSON::mscszMsgType, strAck);
    objAck.insert(clsJSON::mscszSource, clsJSON::mscszXMLMPAM);
qdbg() << "clsModule::onSendAck: " << QJsonDocument(objAck).toJson(QJsonDocument::Compact);
    if ( mblnReady != true ) {
        sendLater(cstrGetAlias(), objAck);
    } else if ( psckReceiver != nullptr
             && psckReceiver->state() == QAbstractSocket::ConnectedState ) {
        QByteArray arybytMsg;
        arybytMsg = QJsonDocument(objAck).toJson(QJsonDocument::Compact);
        psckReceiver->write(arybytMsg);
    }
}

mblnReady is true, psckReceiver is the instance of QTcpSocket that received the message being acknowledged.

[KroMignon]

@SPlatten said in Two way comms via socket?:

But Process B isn't receiving the message from A, what could explain this?

According to the TCP sniffer outputs done before, A is sending the reply.
So the problem is on B side I guess.

[SPlatten]

@KroMignon , thank you, I can see that, but what could it be?

Will launch WireShark and take a closer look.

[Edit] From WireShark:

0000   1e 00 00 00 60 03 01 5f 00 5a 06 40 00 00 00 00   ....`.._.Z.@....
0010   00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00   ................
0020   00 00 00 00 00 00 00 00 00 00 00 01 c5 84 1f bb   ................
0030   51 fb 74 49 39 86 cf 4c 80 18 18 e3 00 62 00 00   Q.tI9..L.....b..
0040   01 01 08 0a 00 d9 d7 67 00 d9 d7 63 7b 22 61 64   .......g...c{"ad
0050   64 72 54 6f 22 3a 22 58 4d 4c 4d 50 41 4d 22 2c   drTo":"XMLMPAM",
0060   22 6d 73 67 54 79 70 65 22 3a 22 72 65 61 64 79   "msgType":"ready
0070   22 2c 22 73 6f 75 72 63 65 22 3a 22 6d 64 46 69   ","source":"mdFi
0080   6c 65 49 4f 22 7d                                 leIO"}

This is the initial module B message declaring that the module is now ready.

0000   1e 00 00 00 60 03 01 5f 00 57 06 40 00 00 00 00   ....`.._.W.@....
0010   00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00   ................
0020   00 00 00 00 00 00 00 00 00 00 00 01 c5 84 1f bb   ................
0030   51 fb 74 83 39 86 cf 4c 80 18 18 e3 00 5f 00 00   Q.t.9..L....._..
0040   01 01 08 0a 00 d9 de cf 00 d9 d7 67 7b 22 61 64   ...........g{"ad
0050   64 72 54 6f 22 3a 22 58 4d 4c 4d 50 41 4d 22 2c   drTo":"XMLMPAM",
0060   22 6d 73 67 54 79 70 65 22 3a 22 68 62 22 2c 22   "msgType":"hb","
0070   73 6f 75 72 63 65 22 3a 22 6d 64 46 69 6c 65 49   source":"mdFileI
0080   4f 22 7d                                          O"}

This is the heartbeat message sent from B to A.

0000   1e 00 00 00 60 03 01 5f 00 57 06 40 00 00 00 00   ....`.._.W.@....
0010   00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00   ................
0020   00 00 00 00 00 00 00 00 00 00 00 01 c5 84 1f bb   ................
0030   51 fb 74 f1 39 86 cf 4c 80 18 18 e3 00 5f 00 00   Q.t.9..L....._..
0040   01 01 08 0a 00 d9 ee 18 00 d9 e6 4a 7b 22 61 64   ...........J{"ad
0050   64 72 54 6f 22 3a 22 58 4d 4c 4d 50 41 4d 22 2c   drTo":"XMLMPAM",
0060   22 6d 73 67 54 79 70 65 22 3a 22 68 62 22 2c 22   "msgType":"hb","
0070   73 6f 75 72 63 65 22 3a 22 6d 64 46 69 6c 65 49   source":"mdFileI
0080   4f 22 7d                                          O"}

Another heartbeat message again from B to A these are sent once every second.

0000   1e 00 00 00 60 03 01 5f 00 57 06 40 00 00 00 00   ....`.._.W.@....
0010   00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00   ................
0020   00 00 00 00 00 00 00 00 00 00 00 01 c5 84 1f bb   ................
0030   51 fb 75 28 39 86 cf 4c 80 18 18 e3 00 5f 00 00   Q.u(9..L....._..
0040   01 01 08 0a 00 d9 f5 e7 00 d9 ee 18 7b 22 61 64   ............{"ad
0050   64 72 54 6f 22 3a 22 58 4d 4c 4d 50 41 4d 22 2c   drTo":"XMLMPAM",
0060   22 6d 73 67 54 79 70 65 22 3a 22 68 62 22 2c 22   "msgType":"hb","
0070   73 6f 75 72 63 65 22 3a 22 6d 64 46 69 6c 65 49   source":"mdFileI
0080   4f 22 7d                                          O"}

And another heartbeat message again B to A, there are plenty of these but no acknowledgements.

So the question changes now, since A is telling me that it has written 55 bytes with the bytesWritten signal, where is the data going?

[KroMignon]

@SPlatten said in Two way comms via socket?:

thank you, I can see that, but what could it be?

I can only guess, I don't know how you set up the QTcpSocket instance on server side:

• You did not connect readyRead() signal
• the instance have been destroyed
• the QEventLoop used by the thread which is hosting the instance is locked
• there is a bug in the slots attached to readyRead() signal

[SPlatten]

@KroMignon , A connections:

QTcpSocket* pSocket = new QTcpSocket();
//Set the ID
qdbg() << "clsServer::run";
if( !pSocket->setSocketDescriptor(msckDescriptor) ) {
//Something's wrong, we just emit a signal
    emit error(pSocket->error());
    return;
}
//Connect socket and signal
mpsckIncoming = pSocket;
QObject::connect(mpsckIncoming, &QAbstractSocket::errorOccurred
                ,this, &clsServer::onErrorOccurred);
QObject::connect(mpsckIncoming, &QAbstractSocket::disconnected
                ,this, &clsServer::onDisconnected);
QObject::connect(mpsckIncoming, &QAbstractSocket::readyRead
                ,this, &clsServer::onReadyRead);

Initialisation on B of QTcpSocket:

mpsckReceiver = new QTcpSocket();
QObject::connect(mpsckReceiver, &QAbstractSocket::bytesWritten
                ,this, &clsModule::onBytesWritten);
QObject::connect(mpsckReceiver, &QAbstractSocket::connected
                ,this, &clsModule::onConnected);
QObject::connect(mpsckReceiver, &QAbstractSocket::readyRead
                ,this, &clsModule::onReadyRead);
QObject::connect(mpsckReceiver, &QAbstractSocket::disconnected
                ,this, &clsModule::onDisconnected);
if ( mpsckReceiver != nullptr && muint16Port > 0 ) {
    QAbstractSocket::SocketState eState = mpsckReceiver->state();

    if ( eState != QAbstractSocket::HostLookupState
      && eState != QAbstractSocket::ConnectedState
      && eState != QAbstractSocket::ConnectingState ) {
        mpsckReceiver->connectToHost(QHostInfo::localHostName(), muint16Port);
    }
}

[KroMignon]

@SPlatten said in Two way comms via socket?:

So the question changes now, since A is telling me that it has written 55 bytes with the bytesWritten signal, where is the data going?

Into the TCP socket output buffer, did you disable Naggle's algorithm or do a QTcpSocket::flush()?

[EDIT] By the way, are you sure you are capturing the right traffic on WireShark? (tcp port 8123)

[SPlatten]

@KroMignon , no what's Naggle's algorithm ?

Wireshark must be ok, because the only address and port I'm sending JSON on is 8123

A sample from Wireshark:

19	2.131440	::1	::1	TCP	131	50625 → 8123 [PSH, ACK] Seq=59 Ack=1 Win=407744 Len=55 TSval=15333115 TSecr=15331092

This is from 50625 -> 8123, no idea what 50625 is? Then immediately after this entry in Wireshark is:

20	2.131460	::1	::1	TCP	76	8123 → 50625 [ACK] Seq=1 Ack=114 Win=407680 Len=0 TSval=15333115 TSecr=15333115

[KroMignon]

@SPlatten said in Two way comms via socket?:

no what's Naggle's algorithm ?

As written earlier (https://forum.qt.io/post/639857), this is the TCP algorithm which handles transmission rules to avoid sending too much small packets.

[JonB]

@SPlatten said in Two way comms via socket?:

what's Naggle's algorithm ?

It's Nagle's algorithm, as @KroMignon wrote :)

However, it is "unusual" to disable this on a socket, it defaults to on for a good reason. If @KroMignon says

You have to call QTcpSocket::flush() to force data sending to counterpart.

and that works I would use that rather then changing the socket option....

[KroMignon]

@JonB said in Two way comms via socket?:

However, it is "unusual" to disable this on a socket

It depends, there are always use cases for this: localhost or local network sockets

[SPlatten]

@JonB , I've added:

psckReceiver->flush();

After write and also added the call to:

mpsckReceiver = new QTcpSocket();
mpsckReceiver->setSocketOption(QAbstractSocket::LowDelayOption, 1);

Still the same, A is receiving but the Ack message is not appearing in WireShark.

[JonB]

@SPlatten
Then by all means try the socket option, as I said I don't know whether that has the same effect. Once neither flushing nor disabling Nagle works, whatever your issue it is something else.

[KroMignon]

@SPlatten said in Two way comms via socket?:

Still the same, A is receiving but the Ack message is not appearing in WireShark.

So there are not so many options in my eyes:

• you are sending on wrong socket
• the socket is closed (did you check return value of QTcpSocket::write() ?)
• the event loop is locked, QTcpSocket requires a working event queue to work.

[SPlatten]

@KroMignon , I modified the onSendJSON slot:

void clsModule::onSendAck(const QJsonObject& crobjJSON, QTcpSocket* psckReceiver) {
    QJsonObject::const_iterator citrFound = crobjJSON.find(clsJSON::mscszMsgType);

    if ( citrFound == crobjJSON.end() ) {
        return;
    }
    QString strAck(clsJSON::mscszAck + citrFound.value().toString());
    QJsonObject objAck;
    objAck.insert(clsJSON::mscszAddrTo, cstrGetAlias());
    objAck.insert(clsJSON::mscszMsgType, strAck);
    objAck.insert(clsJSON::mscszSource, clsJSON::mscszXMLMPAM);
qdbg() << "clsModule::onSendAck: " << QJsonDocument(objAck).toJson(QJsonDocument::Compact);
    if ( mblnReady != true ) {
        sendLater(cstrGetAlias(), objAck);
    } else if ( psckReceiver != nullptr ) {
        QAbstractSocket::SocketState eState(psckReceiver->state());

        if ( eState == QAbstractSocket::ConnectedState ) {
            QByteArray arybytMsg(QJsonDocument(objAck).toJson(QJsonDocument::Compact));
            qint64 int64Write = psckReceiver->write(arybytMsg);
qdbg() << "clsModule::onSendAck, int64Write: " << int64Write;
            psckReceiver->flush();
        }
    }
}

Now its working, annoyingly I'm not sure what I've changed that has fixed it...Thank you to @KroMignon and @JonB.