Launching a queue of processes (was: "Working with Qthreads")

hbatalha

@Christian-Ehrlicher said in Working with Qthreads:

Simply start 3 QProcess instances without any threads.

How can I make that when one process finishes, another onewill be started?

JonB

@hbatalha
Like I said, use the signal QProcess::finished. When one sends that, start a new one. That of course makes your processes execute sequentially, instead of at the same time.

hbatalha

@JonB said in Working with Qthreads:

@hbatalha
Like I said, use the signal QProcess::finished. When one sends that, start a new one. That of course makes your processes execute sequentially, instead of at the same time.

Can you provide some example code? I have a basic idea one what you are saying but not enough to translate it to code.

KroMignon

@hbatalha said in Working with Qthreads:

Can you provide some example code? I have a basic idea one what you are saying but not enough to translate it to code.

Qt framework is an asynchronous framework, this helps for example for UI to avoid locking the main thread and enable user interactions.

One way to do it would be to create a list parameters for the process you want to start and go through this list to start each process at the end of previous one.

For example:

struct ProcInfo
{
    QString procName;
    QStringList procParameters;
    // add what ever you need
};

Then use this to start each process after the other:

class Launcher : public QObject
{
    Q_OBJECT

   QProcess mProc;
   QList<ProcInfo> mProcToStart; 
public:
   Launcher(QObject * parent = nullptr) : QObject(parent)
   {
       mProc.setProcessChannelMode(QProcess::MergedChannels);
       connect(&mProc, &QProcess:stateChanged, [this](QProcess::ProcessState newState) {
           if(newState == QProcess::NotRunning)
               startNext();
           });
   }

   void startProcs(const QList<ProcInfo> &toStart)
   {
       mProcToStart = toStart;
       startNext();
   }
   void startNext()
   {
        if(mProcToStart .isEmpty())
            return;
        auto nextP = mProcToStart.takeFirst();
        mProc.start(nextP.procName, nextP.procParameters);
   }
};

Something like that, up to you to finish it ;)

JKSH

@hbatalha said in Working with Qthreads:

@JonB said in Working with Qthreads:

Like I said, use the signal QProcess::finished. When one sends that, start a new one. That of course makes your processes execute sequentially, instead of at the same time.

Can you provide some example code? I have a basic idea one what you are saying but not enough to translate it to code.

First, get familiarized with the concept of signals and slots: https://doc.qt.io/qt-5/signalsandslots.html This is a core part of most Qt applications. When you know how to use signals and slots, many things will become clearer.

hbatalha

@KroMignon said in Working with Qthreads:

Then use this to start each process after the other:

Is it possible to run multiple processes at the same time.

Also, I couldn't get the code to work, maybe I am missing something or I am using it wrong:

    QList<ProcInfo> procs;
    Launcher l;
    for(auto const& e: selections)
    {
        QStringList args;

        args << "-some_args" << e;

        procs.push_back({"program.exe", args});
    }

    l.startProcs(procs);

Christian Ehrlicher

@hbatalha said in Working with Qthreads:

Is it possible to run multiple processes at the same time.

As I already said - simply create more than one QProcess instance.

hbatalha

@JKSH said in Working with Qthreads:

First, get familiarized with the concept of signals and slots: https://doc.qt.io/qt-5/signalsandslots.html This is a core part of most Qt applications. When you know how to use signals and slots, many things will become clearer.

I did it and was able to do this, which works(is it correct?)

void Dialog::on_pushButton_3_clicked()
{
    for(int i = 0; i < 3; ++i)
    {
        QStringList args;

        args << "some_args" << selections.takeFirst();

        QProcess* pro = new QProcess;

        pro->setProcessChannelMode(QProcess::MergedChannels);

        connect(pro, &QProcess::stateChanged, [this](QProcess::ProcessState newState)
        {
            if(newState == QProcess::NotRunning)
                start_next_process();
        });

        pro->start("program.exe", args);
    }
}

void Dialog::start_next_process()
{
    if(!selections.isEmpty())
    {
        QStringList args;

        args << "some_args" << selections.takeFirst();

        QProcess *process = new QProcess;

        connect(process, &QProcess::stateChanged, [this](QProcess::ProcessState newState)
        {
            if(newState == QProcess::NotRunning)
                start_next_process();
        });

        process->setProcessChannelMode(QProcess::MergedChannels);

        process->start("prgram.exe", args);
    }
}

I took at look at this but haven't yet completely understood

JonB

@hbatalha
You are working from @KroMignon's template. You will not need the QProcess::finished signal I mentioned/your link now refers to because he is effectively doing this (indirectly) via the QProcess::stateChanged signal he connects instead. Which is fine.

Have a look again at his code. In yours you have effectively copied the same block of code out of start_next_process() and into your on_pushButton_3_clicked(). You do not need to do that (repeating the same code is always a suspicious sign). His code is designed for you to use a selections member variable to "queue up" the 3 (in your case) processes you'd like it to run. Your code does no mesh well with that. Please take the time to understand how @KroMignon's approach works.

KroMignon

This post is deleted!

Anonymous_Banned275

A process is a program that is running on your computer. This can be anything from a small background task, such as a spell-checker or system events handler to a full-blown application like Internet Explorer or Microsoft Word. All processes are composed of one or more threads.

I was under the impression that OP want to
run an individual SINGLE thread in sequence in SINGLE process.

So where do all these "queued multiple instance processes " come from ?
Would it be possible to get back to the original question ?

hbatalha

@JonB said in Working with Qthreads:

Please take the time to understand how @KroMignon's approach works.

I have read and I partially understand it. What I can't seem to be able to figure out is how does it work well with my code. when I call it via the void startProcs(const QList<ProcInfo> &toStart) method nothing happens, I have tried using it like this:

    QList<ProcInfo> mProcToStart;

    for(int i = 0; i < 3; ++i)
    {
        QStringList args;

        args << "some_args" << selections.takeFirst();

        mProcToStart.push_back({"programs.exe", args});
    }

    Launcher launch;

    launch.startProcs(mProcToStart);

What am missing here?

When it does work, will it run only the three queued processes taken from selections or all of the selections members?

JonB

@hbatalha said in Working with Qthreads:

when I call it via the void startProcs(const QList<ProcInfo> &toStart) method nothing happens

What do you expect to happen, which doesn't happen?

Step through it in a debugger, or put qDebug() statements at judicious places. That's what programming is all about!

KroMignon

@hbatalha said in Working with Qthreads:

What am missing here?
When it does work, will it run only the three queued processes taken from selections or all of the selections members?

I think your knowledge about how Qt works is to "light".
Perhaps you should take time to read some parts of Qt documentation:

The example class I have written it very lightweight and is just an implementation example to do what you want to do (at least what I have understood):

have a list of process to start
launch next process when first is finished

How does it work:
the class holds a QProcess member which will start each process and a list which defines the process to be started.
In constructor, the signal QProcess::stateChanged is used to be informed when the current process is finished and then start next in queue.

Before starting the next process, you could, for example, check the results of previous process, with:

mProc.exitCode() to get application exit code
mProc.readAll() to get application output

You could also add signals to Launcher class to be informed about all process done or to give progression, and what ever you need.

Again, this is just a code skeleton, to give you a starting point.

hbatalha

@JonB said in Working with Qthreads:

What do you expect to happen, which doesn't happen?

I expect tha program.exe will start but it doesn't.

Step through it in a debugger, or put qDebug() statements at judicious places. That's what programming is all about!

I did , nothing seems to happen when it gets to mProc.start(nextP.procName, nextP.procParameters); . It just finishes up the three elements in the list

hbatalha

@KroMignon said in Working with Qthreads:

I think your knowledge about how Qt works is to "light".

I agree, I will do just that.

The example class I have written it very lightweight and is just an implementation example to do what you want to do (at least what I have understood):

What I want to achieve is, have a QStringList (selections) with unique arguments id, each argument will be used to start a process in its due time.

However, I want theses processes running concurrently but only a given number at one point in time, when one process finishes another one will be started.

For example, suppose selections has 5 elements {"1", "2", "3", "4", "5"}, the element 1, 2, 3 will be the first to start the processes and these processes will run at the same time and when e.g. the process with the argument 1 finishes another process, this time with the argument 4, will be started.

This code does exactly that, and as pointed out by @JonB it has repeated code and he suggested me trying to understand your example and work with it. That is what I am trying to do but as beginner to GUI programming and QT it is proving to be quite challenging.

mProc.exitCode() to get application exit code
mProc.readAll() to get application output

Tried both, exitcode was 0(zero), and the readAll() shows nothing.

Can you provide an example on how you intended the code to be used?

JonB

@hbatalha said in Working with Qthreads:

I expect tha program.exe will start but it doesn't.

Your code does not try to execute program.exe, it tries to execute programs.exe or prgram.exe. You don't have any code for checking for errors/output, you wouldn't be informed. Even if it did work, unless you say how you know it has not be run it is not evident you would be sure it had not run. A proper version should use the various other signals of QProcess; and/or put a qDebug() statement into the lambda in your connect() so that you see all QProcess:stateChanged transitions.

Glancing now at @KroMignon's code, I'm not sure how it's supposed to work as-is :) The Launcher() constructor does the connect() for the single process mProc, while startNext() re-uses that mProc to launch each process. I'm not sure you're supposed to re-use an existing QProcess instance while it has a process running. But he did say "Something like that, up to you to finish it ;)".

His code may work only if you run one process at a time, and wait for one to finish before starting the next. Your start_next_process(), which you say does work, creates a new QProcess for each process, so may be more successful in this case.

In principle to get 3 going you should be able to put (at least) 3 into the queue and then call start_next_process() 3 times. Thereafter as one finishes a new one will be pulled and started. I agree you would have to look at how his code works/change it to allow for this. But even with your code earlier, because the body of on_pushButton_3_clicked() is so similar to start_next_process() it looks to me as though on_pushButton_3_clicked() could simply call start_next_process() 3 times rather than repeating code.

JKSH

This post is deleted!

KroMignon

@hbatalha said in Working with Qthreads:

However, I want theses processes running concurrently but only a given number at one point in time, when one process finishes another one will be started.

As I wrote before, this was only a basic skeleton, and as @JonB supposed, you can not reuse a QProcess to start another process. That is why it runs only once.

So I change the class to create a new QProcess on each process start:

class Launcher : public QObject
{
    Q_OBJECT

   QList<ProcInfo> mProcToStart;
   QProcess *mProc;
public:
   explicit Launcher(QObject * parent = nullptr) : QObject(parent), mProc(nullptr)
   {
   }
   ~Launcher()
   {
       if(mProc)
           mProc->deleteLater();
   }

   void startProcs(const QList<ProcInfo> &toStart)
   {
       mProcToStart.append(toStart);
       startNext();
   }
   bool startNext()
   {
       if(mProcToStart.isEmpty() || (mProc && mProc->state() != QProcess::NotRunning))
           return false;
       auto nextP = mProcToStart.takeFirst();
       mProc = new QProcess();
       mProc->setProcessChannelMode(QProcess::MergedChannels);
       connect(mProc, &QProcess::stateChanged, [this](QProcess::ProcessState newState) {
           if(newState == QProcess::NotRunning)
           {
               qDebug() << "Process" << mProc->program() << "with arguments" << mProc->arguments()<< "done";
               qDebug() << "Exit code is:" << mProc->exitCode();
               qDebug() << "Returned data:" << qUtf8Printable(QString::fromLocal8Bit(mProc->readAll()));
               qDebug() << "--------------------------------------";

               mProc->deleteLater();
               mProc = nullptr;
               if(!startNext())
                   emit isDone();
           }
       });
       mProc->start(nextP.procName, nextP.procParameters);
       return true;
   }

signals:
   void isDone();
};

And here is a working example of use:

int main(int argc, char *argv[])
{
    QCoreApplication a(argc, argv);

    QList<ProcInfo> procs;
    QStringList defArgs;
    defArgs
            << "-n" << "1"  // Only once
            << "-w" << "5000"; // wait up to 5 seconds
    procs.push_back({"ping.exe", QStringList() << defArgs <<"google.com" });
    procs.push_back({"ping.exe", QStringList() << defArgs <<"amazon.com" });
    procs.push_back({"ping.exe", QStringList() << defArgs <<"forum.qt.io" });

    Launcher l;
    l.startProcs(procs);
    QObject::connect(&l, &Launcher::isDone, &a, &QCoreApplication::quit);

    return a.exec();
}

But once again, this is only a "playground". Up to you to do adapt this or create a new class to fit your needs.

hbatalha

@JonB said in Working with Qthreads:

Your code does not try to execute program.exe

It does, I mistyped.

you don't have any code for checking for errors/output, you wouldn't be informed.

I created the code to check the output, which showed nothing and checked the exitcode too.

unless you say how you know it has not be run it is not evident you would be sure it had not run

The program when it is finished it will have created files in a specific directory. So I go into that directory to check if it has run.

I'm not sure you're supposed to re-use an existing QProcess instance while it has a process running.

It has to finish first, right? Maybe that is what is stopping it to work correctly. As I said, I am a complete beginner to Qt, I am still picking up things as I go and you guys are being of great help.

it looks to me as though on_pushButton_3_clicked() could simply call start_next_process() 3 times rather than repeating code.

I did just that, works perfect, thank you.