Open file via double-click

JonB

@UnitScan
Have you run your program outside of Qt Creator? Have you tried passing the same command-line arguments from the command-line as it would if you double-clicked on a file in Explorer?

UnitScan

@Christian-Ehrlicher said in Open file via double-click:

@UnitScan said in Open file via double-click:

The .exe file is located in a folder where there are all the dlls necessary for its operation

How do you know? How did you deploy your app to this location?
Start a cmd.exe, go to the directory and start your app to see if it crashes.

@JonB yes, I deployed my app following this.
Yes, the app crashes if I try to launch it from the command line, while launching it via Explorer it works fine.
If I try to open the files from the command line, the program still crashes

JonB

@UnitScan said in Open file via double-click:

Yes, the app crashes if I try to launch it from the command line, while launching it via Explorer it works fine.

And earlier you wrote:

but when I open them "externally" with the double click the program crashes.

How are these two statements consistent?

Well that sounds strange, doesn't it? The only difference should be what Explorer passes on the command-line. Maybe you've written your program to expect the right thing(s) in argv, I don't know. Have you done this? When you do not run from File Explorer, what arguments are you passing it?

If it crashes from command-line, won't it do so from Creator debugger, where you can see the stack trace?

Otherwise, put some qDebug() statements into it (starting from the very first line in main()) to see where it's getting to. If anywhere.

UnitScan

@JonB said in Open file via double-click:

@UnitScan said in Open file via double-click:

Yes, the app crashes if I try to launch it from the command line, while launching it via Explorer it works fine.

And earlier you wrote:

but when I open them "externally" with the double click the program crashes.

How are these two statements consistent?

Let me explain: if I double click on the exe file via Explorer, it starts regularly. If I launch it via cmd it crashes instead.
If I double click on any audio file, the program opens but crashes immediately

JonB

@UnitScan

If I launch it via cmd it crashes instead.

So what happens if you launch it from Creator debugger, like I asked?

Put in some qDebug() statements to see if it gets as far as your main, and then where.

UnitScan

I did as you asked, and this is the result:

#include "mainwindow.h"
#include <QApplication>
#include <QTimer>
#include <stdio.h>
#include <iostream>

int main(int argc, char *argv[])
{
    for (int i = 0; i < argc; ++i) {
        std::cout << "The " << i << "th argument is " << argv[i] << std::endl;
    }
    QApplication a(argc, argv);
    MainWindow w;
    QTimer::singleShot(0, & w, SLOT(initialize()));
    w.show();

    return a.exec();
}

Application output in Debug mode:

ASSERT failure in QList<T>::at: "index out of range", file C:/Qt/Qt5.14.0/5.14.0/mingw73_32/include/QtCore/qlist.h, line 571

JonB

@UnitScan
You must run it in the debugger, from Creator, not just compile for debug. Then when the ASSERT is hit and the debugger traps it you will find there is a stack trace window. That will show the qlist.h line, and then trace back through all the levels to some line in your code, which is what was being executed when the ASSERT happened.

And please use qDebug() for debug output statements, not std::cout.

Separately, since you persist in using SLOT(), all bets are off as to how that might behave at runtime.

And finally, I hope you know what you're doing with seemingly initializing on a timer, seems hokey to me. You sure you understand exactly when initialize() will be executed, compared to other initializations (like in constructors) you are doing?

ODБOï

@UnitScan hi

@UnitScan said in Open file via double-click:

argv[i]

this is the kind of code that can cause "index out of range" error.
you can use
https://doc.qt.io/qt-5/qcoreapplication.html#arguments
or
https://doc.qt.io/qt-5/qcommandlineparser.html
to retrive the arguments

JonB

@LeLev
In this case he is using main(argc, argv) correctly. The point (to me) is:

ASSERT failure in QList<T>::at: "index out of range", file C:/Qt/Qt5.14.0/5.14.0/mingw73_32/include/QtCore/qlist.h, line 571

I don't see how that can arise from his argc/argv/std::cout loop. Has to be a QList involved!

UnitScan

@JonB well, I found the origin of the assert failure

void MainWindow::performStyles()
{
    QString theme = settings->value("app/theme").toString();
    settings->beginGroup("themes");
    QStringList colors = settings->value(theme).toString().split(",");
    settings->endGroup();
    QString stylesheet = (
                "QSlider::groove:horizontal {"
                "border: 1px solid #999999;"
                "height: 5px;"
                "background: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #B1B1B1, stop:1 #c4c4c4);"
                "border-radius: 3px;"
                "}"
                "QSlider::handle:horizontal {"
                "background: qlineargradient(x1:0, y1:0, x2:1, y2:1, stop:0 #b4b4b4, stop:1 %3);"
                "border: 1px solid #5c5c5c;"
                "width: 16px;"
                "margin: -2px 0;"
                "border-radius: 3px;"
                "}"
                "QSlider::handle:horizontal:hover {"
                "background: qlineargradient(x1:0, y1:0, x2:1, y2:1, stop:0 #FFFFFF, stop:1 %3);"
                "border: 1px solid #808080;"
                "width: 16px;"
                "margin: -2px 0;"
                "border-radius: 3px;"
                "}"
                "QSlider::add-page:horizontal {"
                "background: #c0c0c0;"
                "border-radius: 3px;"
                "margin: 0 -1px;"
                "}"
                "QSlider::sub-page:horizontal {"
                "background: qlineargradient(x1:0, y1:0, x2:1, y2:1, stop:0 #b4b4b4, stop:1 %3);"
                "border-radius: 3px;"
                "}"
                "QFrame#data {"
                "border: 1px solid gray;"
                "border-radius: 5px;"
                "background-color: %1;"
                "}"
                "QLabel#display {"
                "font-size: 20px;"
                "color: %2;"
                "padding-bottom: 1px;"
                "background-color: %1;"
                "}"
                "QLabel#kbps, QLabel#hz, QLabel#channels  {"
                "font-size: 10px;"
                "text-align: center;"
                "color: %2;"
                "}"
                "ScrollText {"
                "font-size: 14px;"
                "text-align: center;"
                "color: %2;"
                "}"
                "QTableView {"
                "border: 1px solid gray;"
                "border-radius: 5px;"
                "background-color: %1;"
                "color: %2;"
                "}"
                "QTableView::item:selected {"
                "border-radius: 3px;"
                "background-color: %2;"
                "color: %1;"
                "}"
                "QScrollBar#vscrollbar:vertical {"
                "border: 1px solid grey;"
                "border-radius: 3px;"
                "background: %1;"
                "width: 15px;"
                "margin: 0px 0 0px 0;"
                "}"
                "QScrollBar#vscrollbar::handle:vertical {"
                "background: qlineargradient(x1:0, y1:0, x2:1, y2:1, stop:0 #b4b4b4, stop:1 %1);"
                "border: 1px solid #5c5c5c;"
                "width: 16px;"
                "min-height: 16px;"
                "border-radius: 3px;"
                "}"
                "QScrollBar#vscrollbar::add-line:vertical {"
                "border: 0px solid grey;"
                "background: #32CC99;"
                "height: 0px;"
                "subcontrol-position: bottom;"
                "subcontrol-origin: margin;"
                "}"
                "QScrollBar#vscrollbar::sub-line:vertical {"
                "border: 0px solid grey;"
                "background: #32CC99;"
                "height: 0px;"
                "subcontrol-position: top;"
                "subcontrol-origin: margin;"
                "}"
                "QScrollBar#vscrollbar::add-page:vertical, QScrollBar::sub-page:vertical {"
                "background: none;"
                "}"
                "QListWidget::item:selected {"
                "background-color: none;"
                "border: 3px solid grey;"
                "}"
                "QListWidget::item:selected { background: transparent; }"
                "QListWidget::item:selected { border: 1px solid red; }"
                );
    this->setStyleSheet(stylesheet.arg(colors.at(0),colors.at(1),colors.at(2)));
}

This seems to be the line causing the error

this->setStyleSheet(stylesheet.arg(colors.at(0),colors.at(1),colors.at(2)));

My ini settings file is written like this

[themes]
Red="#C21212,#ffffff,#C21212"

I must have misused the QString arg method

ODБOï

@JonB yes you are right, my bad.
i thought about argv[i] as a QList for some reason

JonB

@UnitScan
Your colors.at() expressions are fine so long as

QStringList colors = settings->value(theme).toString().split(",");

really does returns 3 colors. My guess is that, depending on how you run the program --- e.g do you read from "the current working directory"? or, what is qDebug() << theme, or qDebug() << settings->value(theme).toString()? --- you're not picking up the right thing? Code like yours which relies on 3 elements from the split() should have a Q_ASSERT(colors.count() == 3);. Anyway, somehow that differs when you run your code in different ways.

I hope now that you have found using the debugger helps find such errors!

UnitScan

I suppose the problem is bigger: when I run the program via cmd it doesn't even load the icons: https://i.imgur.com/yqvpYnl.png

sierdzio

as @JonB pointed out, this is probably related to working directory. Make sure you load your settings from the right path! This might come in handy: https://doc.qt.io/qt-5/qcoreapplication.html#applicationDirPath

UnitScan

@sierdzio said in Open file via double-click:

as @JonB pointed out, this is probably related to working directory. Make sure you load your settings from the right path! This might come in handy: https://doc.qt.io/qt-5/qcoreapplication.html#applicationDirPath

Thank you very much!