qmake SUBDIRS and diamond dependencies

aha_1980

I'm not sure I can follow you. The dependencies for this project (call it ProjA) are now set up correctly.

If you include it in another project, you need to specify the dependencies to ProjA outside, i.e. one level up. However, ProjA is still self-contained.

Or what did you have in mind?

Regards

koahnig

@aha_1980 said in qmake SUBDIRS and diamond dependencies:

@koahnig said in qmake SUBDIRS and diamond dependencies:

CONFIG += ordered

No, please NOT! Don't do that.

Why do you specify dependencies and still use CONFIG+=ORDERED?

Please let the kitten live: https://blog.rburchell.com/2013/10/every-time-you-configordered-kitten-dies.html

Thanks for hint.

Certainly it looked like a tautology to me therefore

@koahnig said in qmake SUBDIRS and diamond dependencies:

I am not sure if there is now too much done, but it is working in my cases.

However, I could get the kitten to fly finally with that "ordered" statement. Afterwards I was overwhelmed by pragmatism. ;)

It was some time back. Therefore, there might have been a bug in the template, if that is possible at all.

aha_1980

Hi @koahnig,

as I already wrote in the other post, the whole dependency handling in qmake is very fragile - I learned the hard way

You don't get a warning if you do it wrong, you build will just fail. Also, the wiki page is far from perfect with giving good examples.

Regards

koahnig

@HendrikGerloff said in qmake SUBDIRS and diamond dependencies:

Thank you for the replies.
@aha_1980 : I got the idea, but I still need to manage all the dependencies in the top most project file. I had more in mind that I have a pool of modules that can be reused in different projects. And modules can depend on modules. Over time and with a growing amount of modules it will be inconvenient / difficult to set up all the dependencies. Therefore I would like to avoid it and pull out the dependencies automatically. But as I see it there is no build in way to do it?

You do not need to define all dependencies for all of your applications.

I have a bunch of dlls and handle their compilation through one subdirs dlls.pro. Then I have a bunch of .pros (one for each application). All application .pros are summarized in another subdirs template .pro, which is the "main" project file for my handling. There I have only the dependency for each application with the dlls.pro.

The separation suggested by @aha_1980 is basically with my dlls.pro. However, I do not have my source there, which would be quite a nightmere to handle. I have the separate .pros of dlls.pro there. The source origins are handled through self-defined qmake macros. I do not consider this as optimal. The outcome is more shaped by legacy.

Therefore if you start freshly to setup things. I think the separation as suggested by @aha_1980 is certainly a very good approach.

guerinoni

@HendrikGerloff
if you want you can check my boilerpalte https://github.com/guerinoni/cpp-qt-project-structure-template.git

aha_1980

@guerinoni Sorry, but a template using CONFIG+=ordered cannot be considered useful!

Again: https://blog.rburchell.com/2013/10/every-time-you-configordered-kitten-dies.html

Regads

koahnig

@aha_1980 said in qmake SUBDIRS and diamond dependencies:

@guerinoni Sorry, but a template using CONFIG+=ordered cannot be considered useful!

Again: https://blog.rburchell.com/2013/10/every-time-you-configordered-kitten-dies.html

Regads

The referenced article is a good read. At least there is an argument that you might kill the multi-core capability with ordered statement.

koahnig

@aha_1980

Bad luck.
I am working currently with the large project in question. Basically I am using "CONFIG += ordered" in 2 subdirs template project files. Both statements have been commented out. All remains of previous qmake and adjacent compilations removed. Ran qmake and started build. It stopped pretty quickly. The hierachy is obviously not recognized because make complaints that the recipe for one of the targets is missing.
The same done and either of the statements reactivated. Basically the same problems remain, but certainly with different targets in complaints.

I am using
SUBDIRS += statements
.subdir = statements
.depends = statements

Especially the .depends statements shall be fine.
SUBDIRS += has the sequence of projects from deep down libs up to the applications requiring those libs. That exact sequence I would use when I have to recompile manually.

My conclusion remains that the ordered statements are required. When those 2 statements have been reactivated, the whole compilation went smoothly through.

aha_1980

@koahnig

Please show your .pro file.

My conclusion remains that the ordered statements are required.

It is definitely not required(1), and it kills parallel builds. That said, even in some Qt modules (e.g. websockets), you'll find this statement. Replacing it with proper dependency code seems to be an advanced topic ;)

Regards

(1) It took me some time to make the parallel build of a company project sane. The problems occurred because I did not understand the qmake Syntax and had errors within.

koahnig

@aha_1980

It is getting ridiculous.

TEMPLATE = subdirs

SUBDIRS = App4Dll
SUBDIRS += Dll4Dll
SUBDIRS += dll_DO_

# where to find the sub projects - give the folders
App4Dll.subdir    = ./App4Dll
Dll4Dll.subdir    = ./Dll4Dll
dll_DO_.subdir          = ./dll_DO_

# what subproject depends on others
App4Dll.depends = Dll4Dll
Dll4Dll.depends = dll_DO_

CONFIG += ordered

That is all boiled down to the basic functionality. It should do all I need. dll_DO_ is another subdirs template. All sequence stuff is already reversed.
As shown as above qmake is working. When last line is commented, it will not worked anymore.
Error message is:

18:59:23: Running steps for project ESAndroid...
18:59:23: Starting: "C:\Qt\5.14.1\android\bin\qmake.exe" E:\Source\Android\E\ES\ESAndroid.pro -spec android-clang "CONFIG+=qtquickcompiler" ANDROID_ABIS="armeabi-v7a"
18:59:23: The process "C:\Qt\5.14.1\android\bin\qmake.exe" exited normally.
18:59:23: Starting: "f:\Android\Sdk4Qt5.14.1\ndk-bundle\prebuilt\windows-x86_64\bin\make.exe" -f r:/build-ESAndroid-Android_for_armeabi_v7a_arm64_v8a_x86_x86_64_Clang_Qt_5_14_1_for_Android-Release/Makefile qmake_all
make: *** No rule to make target 'sub---Dll4Dll-qmake_all', needed by 'sub-App4Dll-qmake_all'.  Stop.
18:59:23: The process "f:\Android\Sdk4Qt5.14.1\ndk-bundle\prebuilt\windows-x86_64\bin\make.exe" exited with code 2.
Error while building/deploying project ESAndroid (kit: Android for armeabi-v7a,arm64-v8a,x86,x86_64 (Clang Qt 5.14.1 for Android))
When executing step "qmake"
18:59:23: Elapsed time: 00:00.

aha_1980

@koahnig said in qmake SUBDIRS and diamond dependencies:

App4Dll.subdir = ./App4Dll
Dll4Dll.subdir = ./Dll4Dll
dll_DO_.subdir = ./dll_DO_

These are your problems, 99% sure.

Please show the corresponding directory structure, and where all the pro files live.

koahnig

@aha_1980

You were pretty fast ;)

Here is the structure. For first dir of folder some entries removed.

 Datentrger in Laufwerk E: ist DATA
 Volumeseriennummer: C265-8340

 Verzeichnis von e:\Source\Android\E\ES

26.02.2020  19:11    <DIR>          .
26.02.2020  19:11    <DIR>          ..
26.02.2020  18:35    <DIR>          App4Dll
26.02.2020  19:11                 0 aus
25.02.2020  19:01               689 config.xml
28.10.2018  13:36               777 config_xml.in
26.02.2020  18:36    <DIR>          Dll4Dll
26.02.2020  15:08    <DIR>          dll_DO_
26.02.2020  18:58               354 ESAndroid.pro
21.02.2020  18:36           101'017 ESAndroid.pro.user
               8 Datei(en),        235'801 Bytes
              12 Verzeichnis(se), 137'678'741'504 Bytes frei
 Datentrger in Laufwerk E: ist DATA
 Volumeseriennummer: C265-8340

 Verzeichnis von e:\Source\Android\E\ES\App4Dll

26.02.2020  18:35    <DIR>          .
26.02.2020  18:35    <DIR>          ..
25.02.2020  16:08             5'376 App4Dll.pro
               1 Datei(en),          5'376 Bytes
               2 Verzeichnis(se), 137'678'741'504 Bytes frei
 Datentrger in Laufwerk E: ist DATA
 Volumeseriennummer: C265-8340

 Verzeichnis von e:\Source\Android\E\ES\Dll4Dll

26.02.2020  18:36    <DIR>          .
26.02.2020  18:36    <DIR>          ..
24.02.2020  13:17             4'063 Dll4Dll.pro
               1 Datei(en),          4'063 Bytes
               2 Verzeichnis(se), 137'678'741'504 Bytes frei
 Datentrger in Laufwerk E: ist DATA
 Volumeseriennummer: C265-8340

 Verzeichnis von e:\Source\Android\E\ES\dll_DO_

26.02.2020  15:08    <DIR>          .
26.02.2020  15:08    <DIR>          ..
26.02.2020  15:08             2'076 dll_DO_.pro
25.02.2020  19:01    <DIR>          EDll
25.02.2020  19:01    <DIR>          IDll
25.02.2020  19:01    <DIR>          NBDll
25.02.2020  19:01    <DIR>          NDll
25.02.2020  19:01    <DIR>          NIDll
25.02.2020  19:01    <DIR>          NLibDO_
22.02.2020  12:04    <DIR>          QNtp
25.02.2020  19:01    <DIR>          RLDO_A
25.02.2020  19:01    <DIR>          RLDO_Bs
25.02.2020  19:01    <DIR>          RLDO_Br
25.02.2020  19:01    <DIR>          RLDO_M
25.02.2020  19:01    <DIR>          RLDO_NR
25.02.2020  19:01    <DIR>          RLDO_OO
25.02.2020  19:01    <DIR>          RLDO_Ssr
25.02.2020  19:01    <DIR>          SDll
               1 Datei(en),          2'076 Bytes
              17 Verzeichnis(se), 137'678'741'504 Bytes frei

aha_1980

@koahnig I happened to be around.

So, your subdirs have the same name as your pro files, like App4Dll/App4Dll.pro.

I repeat it: in this case, the App4Dll.subdir line is superflous (and probably wrong, because this is hard to get right).

As next step, remove these completely:

App4Dll.subdir = ./App4Dll
Dll4Dll.subdir = ./Dll4Dll
dll_DO_.subdir = ./dll_DO_

Also remove CONFIG+=ordered, clean everything and then rerun qmake and make.

It should work.

koahnig

@aha_1980

TEMPLATE = subdirs

SUBDIRS = App4Dll
SUBDIRS += Dll4Dll
SUBDIRS += dll_DO_

# where to find the sub projects - give the folders
#App4Dll.subdir    = ./App4Dll
#Dll4Dll.subdir    = ./Dll4Dll
#dll_DO_.subdir          = ./dll_DO_

# what subproject depends on others
App4Dll.depends = Dll4Dll
Dll4Dll.depends = dll_DO_

#CONFIG += ordered

This does work 8|
You are correct. Unbelievable.
Just ran qmake from creator and it worked. Also did a full compilation of my project.

Thanks a lot for the hint.

koahnig

I have modified also dll_DO_.pro which is also based on subdirs template.

The whole compilation with ordered modifier is sped up from approximately 9:30 to around 7:45. Therefore there is a significant increase in compilation speed of about 20-25% on an eight core Windows 64 bit machine for that specific project and tool chain.

However, as it turns out the use of .subdir does not work. I have 15 different subfolders and 1 of them would require the .subdir specification, since the name used in SUBDIRS has been different. However, I had to modify the name in SUBDIRS to make it homogenous with the subprojects. Otherwise the ordered modifier was required.

HendrikGerloff

@aha_1980 said in qmake SUBDIRS and diamond dependencies:

@HendrikGerloff

I don't see a big problem in solving this dependency.

I guess the src.file = src/src.pro lines are the problem, as most often has been for me.

The best tip I can give you: put all subdirs into a subdirectory with a pro file of the the same name, e.g. src/ with src/src.pro.

In that case, the sub.file line is even unneeded!

So the problems are most likely the a...c subdirs.

You can manage that with an hierarchy of subdirs:
main.pro (SUBDIRS)
SUBDIRS += src

src/src.pro (SUBDIRS)
SUBDIRS += src aSub bSub cSub

src.depends += aSub
src.depends += cSub

aSub.depends += cSub
bSub.depends += cSub

src/src/src.pro (app)

src/baSub/aSub.pro (lib)

src/bSub/bSub.pro (lib)

src/cSub/cSub.pro (lib)
I hope you got the idea.

Regards

But I still have to manage all dependencies in my top level pro file, right? That was what I wanted to avoid. I hoped that I could define the dependencies in the sub pro files.

HendrikGerloff

@guerinoni said in qmake SUBDIRS and diamond dependencies:

@HendrikGerloff
if you want you can check my boilerpalte https://github.com/guerinoni/cpp-qt-project-structure-template.git

You template does not work without CONFIG += ordered so it does not really solve my problem. My problem is that 2 modules both depend on another module which is build twice / at the same time when using more than one core.

guerinoni

@HendrikGerloff I know, maybe my structure is something legacy but it works fine for my jobs... also qt-creator using this for qmake... for the future I am going to use only cmake