same signal-slot connection in two windows

[jazzco2]

@russjohn834 Can you test what happens if you hide() the Settings instead of close() them?

void Settings::on_pushButton_patients_clicked()
{
    this->hide();
    stagetwo = new Patients(this);
    stagetwo -> show();
}

[russjohn834]

@jazzco2 Did try that, in both case (hide or close) slot in the Patients not being called

[JonB]

@russjohn834
Try commenting out in Settings::Settings

connect(&api, &tetra_grip_api::tetraGripEvent,this, &Settings::eventHandler);

Let's not have Settings connected to the signal while we sort out Patients.

[jazzco2]

Ok, I just wondered what happens, because close() may delete your Settings afterwards and you have no access to neither Settings nor Patients. What about the other tests:

• Did it help to pass the pointer to Settings and to Patients in the constructor?

• In what order are the debug messages when you add them in Settings::eventHandler() and after connecting and disconnecting (destructor) in Settings and Patients? (I wonder if the connection is cut off before it is called)

[JonB]

@jazzco2
I suggested earlier that OP run for now with

void Settings::on_pushButton_patients_clicked()
{
    // this->close();
    // stagetwo = new Patients(this);
    stagetwo = new Patients(nullptr);
    stagetwo -> show();
}

Although it apparently did not solve, I suggest he revert to that code while sorting this out. It will remove some irrelevant paths of investigation.

[Christian Ehrlicher]

Maybe it would be easier if the OP could provide a minimal, compilable example of his problem so we can try it out by ourself. I see a good chance here that the current code is that confusing that no suggestion from here will ever help.

[jazzco2]

@JonB Yes that's fine. It also should be ensured that

• both &api references point to the same instance.
  -> add debug messages at each connect(..) to display the pointer

• the connection is alive
  -> add several debug messages as I pointed out earlier

• the signal tetraGripEvent() is emitted in both cases
  -> keep Settings alive (using hide() instead of close()) and add a debug message in Settings::eventHandler

[russjohn834]

@Christian-Ehrlicher
Please find here the minimal version of both the class files (.cpp and .h and main)

main.cpp

#include "settings.h"
#include "tetra_grip_api.h"
#include <QApplication>

tetra_grip_api api;

int main(int argc, char *argv[])
{
    QApplication a(argc, argv);

    api.openSerialPort();

    QObject::connect(api.serial, SIGNAL(readyRead()), &api, SLOT(readData()));

    Settings w(nullptr);
    w.show();

    return a.exec();
}

Settings.cpp

#include "settings.h"
#include "ui_settings.h"
#include "tetra_grip_api.h"

 Settings ::   Settings (QWidget *parent) : QMainWindow(parent)
QMainWindow(parent)
    , ui(new Ui::Settings )
{
    ui->setupUi(this);
    
    connect(&api, &tetra_grip_api::tetraGripEvent,this, &Settings::eventHandler);

}

   Settings ::~Settings ()
{
    delete ui;
}

void Settings::on_pushButton_exit_clicked()
{
    QApplication::quit();
    
}

void Settings::on_pushButton_patients_clicked()
{
     this->hide();
     stagetwo = new Patients(this);
     stagetwo -> show();
}

void Settings::eventHandler(STIM_GUI_TOPIC_T topic, uint8_t reg, uint32_t value)
{

    if (topic==TOPIC_STIMULATOR)
    {
        switch(reg)
        {
        case STIM_REG_BATTERY_CAPACITY_REMAINING:

             ui->label_statusBat->setText("Battery remaining: "+QString::number(value)+"%");
           
            break;
        }
    }
}

settings.h

#ifndef SETTINGS_H
#define SETTINGS_H

#include <QMainWindow>
#include "patients.h"
#include <QtSerialPort/QSerialPort>
#include "tetra_grip_api.h"
#include <QDebug>



QT_BEGIN_NAMESPACE
namespace Ui { class Settings; }
QT_END_NAMESPACE

class Settings : public QMainWindow
{
    Q_OBJECT

public:

     Settings(QWidget *parent = nullptr);
    ~Settings();
     Patients *stagetwo;


private slots:

    void on_pushButton_exit_clicked();
    void on_pushButton_patients_clicked();


public slots:

 void eventHandler(STIM_GUI_TOPIC_T topic, uint8_t reg, uint32_t value);


private:
    Ui::Settings *ui;
 
};
#endif

patients.cpp (I'm giving a bit more details here because here the slot not being called from Settings)..I have a table here , user can select an entry to do something else...

#include "patients.h"
#include "ui_patients.h"
#include "settings.h"
#include <QDebug>
#include <QFile>
#include <QDirIterator>
#include <QXmlStreamReader>
#include <QMessageBox>
#include "tetra_grip_api.h"


Patients::Patients(QWidget *parent) :
    QMainWindow(parent),
    ui(new Ui::Patients)
{
    ui->setupUi(this);


  connect(&api, &tetra_grip_api::tetraGripEvent,this, &Patients::eventHandlerTwo);

 // Setup table
    ui->tableWidget->setColumnCount(5);
    ui->tableWidget->setHorizontalHeaderLabels(QStringList{"Patient ID","Name", "Surname", "LastSession", "Note"});
    ui->tableWidget->horizontalHeader()->setSectionResizeMode(QHeaderView::Stretch);
    ui->tableWidget->setSelectionBehavior(QAbstractItemView::SelectRows);



    QString path = QCoreApplication::applicationDirPath()+"/data/";



    QStringList qdiFilter("*.xml");

  //  patientData data;

    QDirIterator qdi( path, qdiFilter, QDir::Files);
    while (qdi.hasNext())
    {
        parseDataEntry(qdi.next());
        //data.parseDataEntry(qdi.next());
    }

}

void Patients::parseDataEntry(const QString dataPath)
{

    QString patientID, firstName, surName, lastSession = "", pNote;

    // Load our XML file.
    QFile *xmlFile;
    xmlFile = new QFile(dataPath);
    if(!xmlFile->open(QIODevice::ReadOnly | QIODevice::Text))
    {
        QMessageBox::critical(this,
                              "Error Loading Patient Data File",
                              QString("Could not load the patient XML data file at:\r\n  %0").arg(dataPath),
                              QMessageBox::Ok);
        return;
    }

    // Create an XML reader.
    QXmlStreamReader *xmlReader;
    xmlReader = new QXmlStreamReader(xmlFile);


    // Parse each element of the XML until we reach the end.
    while(!xmlReader->atEnd() && !xmlReader->hasError()) {
        // Read next element
        QXmlStreamReader::TokenType token = xmlReader->readNext();

        // If token is just StartDocument - go to next
        if(token == QXmlStreamReader::StartDocument) {
            continue;
        }

        // If token is StartElement - read it
        if(token == QXmlStreamReader::StartElement) {

            if(xmlReader->name() == "Name") {
                firstName = xmlReader->readElementText();

            } else if(xmlReader->name() == "Surname") {
                surName = xmlReader->readElementText();
            }
            else if(xmlReader->name() == "Patient_ID") {
                patientID = xmlReader->readElementText();
            }
            else if(xmlReader->name() == "Date") {
                lastSession = xmlReader->readElementText();
            }
            else if(xmlReader->name() == "Clinician_Note") {
                pNote = xmlReader->readElementText();
            }
        }
    }

    if(xmlReader->hasError()) {
        QMessageBox::critical(this,
                              "Error Parsing Patient Data File",
                              QString("Error reading the patient file at:\r\n  %0,\r\nError:  %1").arg(dataPath,
                                                                                                       xmlReader->errorString()),
                              QMessageBox::Ok);
        return;
    }


    // close reader and flush file
    xmlReader->clear();
    xmlFile->close();


    // Delete
    delete xmlFile;
    delete xmlReader;


    // Add a new row to the table, with the data we parsed.
    ui->tableWidget->insertRow(ui->tableWidget->rowCount());

    ui->tableWidget->setItem(ui->tableWidget->rowCount() - 1,
                             0,
                             new QTableWidgetItem(patientID));
    ui->tableWidget->setItem(ui->tableWidget->rowCount() - 1,
                             1,
                             new QTableWidgetItem(firstName));
    ui->tableWidget->setItem(ui->tableWidget->rowCount() - 1,
                             2,
                             new QTableWidgetItem(surName));
    ui->tableWidget->setItem(ui->tableWidget->rowCount() - 1,
                             3,
                             new QTableWidgetItem(lastSession));
    ui->tableWidget->setItem(ui->tableWidget->rowCount() - 1,
                             4,
                             new QTableWidgetItem(pNote));
  //  ui->tableWidget->setCellWidget(ui->tableWidget->rowCount()-1,3, new QTableWidgetItem(lastSession))
}

Patients::~Patients()
{
    delete ui;
}

void Patients::on_pushButton_Open_clicked()
{
    QModelIndexList selection=ui->tableWidget->selectionModel()->selectedRows(0);
    qDebug()<<"\n The content is"<<selection[0].data().toString();

...
}


void Patients::eventHandlerTwo( STIM_GUI_TOPIC_T topic, uint8_t reg, uint32_t value)
{
    ui->label_test->setText("Slot called");
 }

and patients.h

#ifndef PATIENTS_H
#define PATIENTS_H

#include <QMainWindow>
#include "tetra_grip_api.h"


namespace Ui {
class Patients;
}

class Patients : public QMainWindow
{
    Q_OBJECT

public:
      Patients( QWidget *parent = nullptr);
    ~Patients();
    void parseDataEntry(const QString dataPath);

public slots:

    void eventHandlerTwo(STIM_GUI_TOPIC_T topic, uint8_t reg, uint32_t value);

    void on_pushButton_Open_clicked();

private:
    Ui::Patients *ui;

};

#endif 

and the API class tetra_grip_api.h

#ifndef TETRA_GRIP_API_H
#define TETRA_GRIP_API_H

#include <QObject>
#include <stdio.h>
#include <stdlib.h>
#include <iostream>
#include <string>
#include <QtSerialPort/QSerialPort>
#include <QtSerialPort/QSerialPortInfo>
#include <QLabel>
#include <QMessageBox>


#define _CRT_SECURE_NO_DEPRECATE

class tetra_grip_api : public QObject
{
    Q_OBJECT

public:
    explicit tetra_grip_api(QObject *parent = nullptr);


    #define MAX_CONFIG_FILE_LENGTH (10000)


     bool static send_short_block(STIM_GUI_MESSAGE_S_BLOCK_T *pblock);
     void static battery_percentage(void);

     QSerialPort *serial = nullptr;



signals:


     void tetraGripEvent(STIM_GUI_TOPIC_T topic, uint8_t reg, uint32_t value);


public slots:

     void openSerialPort();
     void closeSerialPort();
     void readData();


private:

        QString comPortName;

};

extern tetra_grip_api api;

#endif // TETRA_GRIP_API_H

and tetra_grip_api.cpp

#include "tetra_grip_api.h"
#include "tetra_grip_reporter.h"
#include <QDebug>
#include <stdio.h>
#include <stdlib.h>


#define _CRT_SECURE_NO_DEPRECATE

using namespace::std;

tetra_grip_api::tetra_grip_api(QObject *parent) : QObject(parent)
{


}

void tetra_grip_api::openSerialPort()
{
    serial = new QSerialPort();

    QList <QSerialPortInfo>stim;
    QSerialPortInfo info;
    foreach (const QSerialPortInfo &info, QSerialPortInfo::availablePorts())
    {
       if(info.description() == "USB Serial Port" && info.manufacturer() == "FTDI" && QString::number(info.vendorIdentifier(), 16)== "403" && QString::number(info.productIdentifier(), 16)== "6015")
        {
           comPortName = info.portName();
        }
    }

    serial->setPortName(comPortName);
    serial->setBaudRate(1000000); /
    serial->setDataBits(QSerialPort::Data8);
    serial->setParity(QSerialPort::NoParity);
    serial->setStopBits(QSerialPort::OneStop);
    serial->setFlowControl(QSerialPort::HardwareControl); 
    if(serial->open(QIODevice::ReadWrite))
    {
        qDebug()<<"Opend port OK";
    }
    else
    {
        qDebug()<<"Failed to open port. Error code: "<< serial->error() << serial->errorString();
    }

}

void tetra_grip_api::readData()
{

   const QByteArray data = api.serial->readAll();
    STIM_GUI_PROTOCOL_Process_Received_Bytes((uint8_t*)data.data(), (size_t)data.length());

}


void tetra_grip_api::closeSerialPort()
{
    if (serial->isOpen())
        serial->close();
}


void tetra_grip_reporter(STIM_GUI_TOPIC_T topic, uint8_t reg, uint32_t value)
{
    emit api.tetraGripEvent(topic, reg, value);
}

[JonB]

@russjohn834 said in same signal-slot connection in two windows:

StageTwoPatients::~StageTwoPatients()
{
    delete ui;
}

What is this definition doing in the middle of the Patients class?

Meanwhile, I don't see any ~Patients() definition as per declared in the header file.

[Christian Ehrlicher]

@russjohn834 said in same signal-slot connection in two windows:

tetra_grip_api api;

I would rename this to something other, use an own 'extern' definition and try again.

[russjohn834]

@JonB

Sorry about that typo. Originally the name of my class was a bit lengthier so I use Settings and Patients for better understanding..

[JonB]

@russjohn834
Typo?? This is a copy & paste of your actual code, I trust

Please find here the minimal version of both the class files (.cpp and .h and main)

We have had way too many people who claim to paste but then say it's not actually a paste of running code, if you're saying that's what you did....

[russjohn834]

Hi all,

Finally I solved it. Thanks a lot for all your time and feedback :)

[JonB]

After all of this you have to tell us what the issue was!?

[russjohn834]

@JonB

It's bit late to understand that I need to call a method in the API (battery_percentage) to emit signal tetraGripEvent ( bettery_percentage will contact "battery register" in the device and this will force API to emit signal)

basically I need to do this on both Settings and Patients

#include "settings.h"
#include "ui_settings.h"

 Settings ::   Settings (QWidget *parent) : QMainWindow(parent)
QMainWindow(parent)
    , ui(new Ui::Settings )
{
    ui->setupUi(this);
    
    connect(&api, &tetra_grip_api::tetraGripEvent,this, &Settings::eventHandler);
...
  tetra_grip_api::battery_percentage(); ------> calling this only emit the signal

}

and in Patients

#include "patients.h"
#include "ui_patients.h"

Patients::Patients(QWidget *parent) :
    QMainWindow(parent),
    ui(new Ui::Patients)
{
    ui->setupUi(this);


  connect(&api, &tetra_grip_api::tetraGripEvent,this, &Patients::eventHandlerTwo);
...
  tetra_grip_api::battery_percentage(); 

}

Originally I was calling tetra_grip_api::battery_percentage(); only in my Settings , and forgot to do this in Patients , that was the issue. That got solved now

But I still trying to understand why this worked!?
(here i did not call tetra_grip_api::battery_percentage(); in Patients)

Construct both Settings and Patients window from Main

#include <QApplication>

tetra_grip_api api;

int main(int argc, char *argv[])
{
    QApplication a(argc, argv);

    api.openSerialPort();
    QObject::connect(api.serial, SIGNAL(readyRead()), &api, SLOT(readData()));
    

    Settings  w(nullptr); 
    Patients  v(nullptr); //---- >this behaves without tetra_grip_api::battery_percentage()

    v.show();
    w.show();

    return a.exec();
}

[jazzco2]

I think that the signal of tetra_grip_api creates an event so it's execution is delayed until the event queue is started at return a.exec();. At that point the slots in both classes are already listening.