Failure to build QT5 5.12.3 on Raspberry Pi zero

sierdzio

@SoheilSabz said in Failure to build QT5 5.12.3 on Raspberry Pi zero:

-qpa eglfs
-qt-xcb

Not sure but I suspect these 2 flags clash with each other. Try not specifying any of them (or just one).

Also - are you sure you need all the remaining modules? Will you use Qt to draw any GUI or just command line stuff? The more modules you -skip or remove from source directory, the faster the compilation will be.

SoheilSabz

the fisrt configuratoin setting was:

PKG_CONFIG_LIBDIR=/usr/lib/arm-linux-gnueabihf/pkgconfig:/usr/share/pkgconfig \
../qt-everywhere-src-5.12.3/configure -platform linux-rpi-g++ \
-v \
-opengl es2 -eglfs \
-no-gtk \
-opensource -confirm-license -release \
-reduce-exports \
-force-pkg-config \
-nomake examples -no-compile-examples \
-skip qtwayland \
-skip qtwebengine \
-no-feature-geoservices_mapboxgl \
-qt-pcre \
-no-pch \
-ssl \
-evdev \
-system-freetype \
-fontconfig \
-glib \
-prefix /opt/Qt5.12 \
-qpa eglfs \
-qt-xcb

as you said i removed -qpa eglfs from configuration. and the output of configuration setting was:

Trying source 0 (type pkgConfig) of library libresourceqt5 ...
+ /usr/bin/pkg-config --exists --silence-errors libresourceqt5
pkg-config did not find package.
  => source produced no result.

Cannot find libclang's main header file, candidate: /usr/lib/llvm-3.8/include/clang-c/Index.h.
Cannot find libclang's main header file, candidate: /usr/lib/llvm-3.8/include/clang-c/Index.h.
Done running configuration tests.

Configure summary:

Build type: linux-rpi-g++ (arm, CPU features: <none>)
Compiler: gcc 6.3.0
Configuration: use_gold_linker enable_new_dtags largefile shared rpath release c++11 c++14 concurrent dbus reduce_exports stl
Build options:
  Mode ................................... release
  Optimize release build for size ........ no
  Building shared libraries .............. yes
  Using C standard ....................... C11
  Using C++ standard ..................... C++14
  Using ccache ........................... no
  Using gold linker ...................... yes
  Using new DTAGS ........................ yes
  Using precompiled headers .............. no
  Using LTCG ............................. no
  Target compiler supports:
    NEON ................................. no
  Build parts ............................ libs tools
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... yes
  Qt Gui ................................. yes
  Qt Network ............................. yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. yes
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... yes
  udev ................................... yes
  Using system zlib ...................... yes
Qt Core:
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ yes
  GLib ................................... yes
  iconv .................................. no
  ICU .................................... yes
  Tracing backend ........................ <none>
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  Using system PCRE2 ..................... no
Qt Network:
  getifaddrs() ........................... yes
  IPv6 ifname ............................ yes
  libproxy ............................... no
  Linux AF_NETLINK ....................... yes
  OpenSSL ................................ yes
    Qt directly linked to OpenSSL ........ no
  OpenSSL 1.1 ............................ yes
  DTLS ................................... yes
  SCTP ................................... no
  Use system proxies ..................... yes
Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ yes
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. yes
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... yes
    PNG .................................. yes
      Using system libpng ................ yes
  EGL .................................... yes
  OpenVG ................................. yes
  OpenGL:
    Desktop OpenGL ....................... no
    OpenGL ES 2.0 ........................ yes
    OpenGL ES 3.0 ........................ yes
    OpenGL ES 3.1 ........................ yes
    OpenGL ES 3.2 ........................ yes
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... yes
  INTEGRITY HID .......................... no
  mtdev .................................. yes
  tslib .................................. yes
  xkbcommon .............................. yes
  X11 specific:
    XLib ................................. yes
    XCB Xlib ............................. yes
    EGL on X11 ........................... yes
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. yes
  EGLFS details:
    EGLFS OpenWFD ........................ no
    EGLFS i.Mx6 .......................... no
    EGLFS i.Mx6 Wayland .................. no
    EGLFS RCAR ........................... no
    EGLFS EGLDevice ...................... yes
    EGLFS GBM ............................ yes
    EGLFS VSP2 ........................... no
    EGLFS Mali ........................... no
    EGLFS Raspberry Pi ................... yes
    EGLFS X11 ............................ yes
  LinuxFB ................................ yes
  VNC .................................... yes
  Mir client ............................. no
  XCB:
    Using system-provided XCB libraries .. no
    XCB XKB .............................. yes
    XCB XInput ........................... yes
    Native painting (experimental) ....... yes
    GL integrations:
      GLX Plugin ......................... no
      EGL-X11 Plugin ..................... yes
Qt Sql:
  SQL item models ........................ yes
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows
Qt PrintSupport:
  CUPS ................................... yes
Qt Sql Drivers:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. yes
  OCI (Oracle) ........................... no
  ODBC ................................... yes
  PostgreSQL ............................. yes
  SQLite2 ................................ yes
  SQLite ................................. yes
    Using system provided SQLite ......... no
  TDS (Sybase) ........................... yes
Qt Testlib:
  Tester for item models ................. yes
Qt SerialBus:
  Socket CAN ............................. yes
  Socket CAN FD .......................... yes
Qt QML:
  QML network support .................... yes
  QML debugging and profiling support .... yes
  QML sequence object .................... yes
  QML list model ......................... yes
  QML XML http request ................... yes
  QML Locale ............................. yes
  QML delegate model ..................... yes
Qt Quick:
  Direct3D 12 ............................ no
  AnimatedImage item ..................... yes
  Canvas item ............................ yes
  Support for Qt Quick Designer .......... yes
  Flipable item .......................... yes
  GridView item .......................... yes
  ListView item .......................... yes
  TableView item ......................... yes
  Path support ........................... yes
  PathView item .......................... yes
  Positioner items ....................... yes
  Repeater item .......................... yes
  ShaderEffect item ...................... yes
  Sprite item ............................ yes
Qt Scxml:
  ECMAScript data model for QtScxml ...... yes
Qt Gamepad:
  SDL2 ................................... no
Qt 3D:
  Assimp ................................. yes
  System Assimp .......................... no
  Output Qt3D Job traces ................. no
  Output Qt3D GL traces .................. no
  Use SSE2 instructions .................. no
  Use AVX2 instructions .................. no
  Aspects:
    Render aspect ........................ yes
    Input aspect ......................... yes
    Logic aspect ......................... yes
    Animation aspect ..................... yes
    Extras aspect ........................ yes
Qt 3D Renderers:
  OpenGL Renderer ........................ yes
Qt 3D GeometryLoaders:
  Autodesk FBX ........................... no
Qt Bluetooth:
  BlueZ .................................. no
  BlueZ Low Energy ....................... no
  Linux Crypto API ....................... no
  WinRT Bluetooth API (desktop & UWP) .... no
Qt Sensors:
  sensorfw ............................... no
Qt Quick Controls 2:
  Styles ................................. Default Fusion Imagine Material Universal
Qt Quick Templates 2:
  Hover support .......................... yes
  Multi-touch support .................... yes
Qt Positioning:
  Gypsy GPS Daemon ....................... no
  WinRT Geolocation API .................. no
Qt Location:
  Qt.labs.location experimental QML plugin . yes
  Geoservice plugins:
    OpenStreetMap ........................ yes
    HERE ................................. yes
    Esri ................................. yes
    Mapbox ............................... yes
    MapboxGL ............................. no
    Itemsoverlay ......................... yes
QtXmlPatterns:
  XML schema support ..................... yes
Qt Multimedia:
  ALSA ................................... yes
  GStreamer 1.0 .......................... yes
  GStreamer 0.10 ......................... no
  Video for Linux ........................ yes
  OpenAL ................................. no
  PulseAudio ............................. yes
  Resource Policy (libresourceqt5) ....... no
  Windows Audio Services ................. no
  DirectShow ............................. no
  Windows Media Foundation ............... no
Qt Tools:
  QDoc ................................... no

WARNING: QDoc will not be compiled, probably because libclang could not be located. This means that you cannot build the Qt documentation.

Either ensure that llvm-config is in your PATH environment variable, or set LLVM_INSTALL_DIR to the location of your llvm installation.
On Linux systems, you may be able to install libclang by installing the libclang-dev or libclang-devel package, depending on your distribution.
On macOS, you can use Homebrew's llvm package.
On Windows, you must set LLVM_INSTALL_DIR to the installation path.

Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into '/opt/Qt5.12'.

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

now the make output is here:

pi/Desktop/qt-everywhere-src-5.12.3/qtbase/mkspecs/linux-rpi-g++ -o .obj/main.o /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/generic/tuiotouch/main.cpp
rm -f libqtuiotouchplugin.so
g++ -Wl,--no-undefined -Wl,-O1 -fuse-ld=gold -Wl,--enable-new-dtags -Wl,-z,origin -Wl,-rpath,\$ORIGIN/../../lib -shared -o libqtuiotouchplugin.so .obj/main.o .obj/qoscbundle.o .obj/qoscmessage.o .obj/qtuiohandler.o .obj/moc_qtuiohandler_p.o  -L/opt/vc/lib -L/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/lib -lQt5Gui -lQt5Network -lQt5Core -lbrcmGLESv2 -lbrcmEGL -lpthread    
mv -f libqtuiotouchplugin.so ../../../../plugins/generic/libqtuiotouchplugin.so
make[5]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/generic/tuiotouch'
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/generic'
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:725: recipe for target 'sub-plugins-make_first' failed
make[2]: *** [sub-plugins-make_first] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:50: recipe for target 'sub-src-make_first' failed
make[1]: *** [sub-src-make_first] Error 2
make[1]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase'
Makefile:83: recipe for target 'module-qtbase-make_first' failed
make: *** [module-qtbase-make_first] Error 2

but now i have another problem!!!

My stackexchange question link:

https://raspberrypi.stackexchange.com/questions/99649/failure-to-build-qt5-5-12-3-on-raspberry-pi-zero-sub-plugins-make-first-error

sierdzio

That output does not show any error message. Search before it (since you compile with -j flag the output is mixed so make does not exit immediately on error, it has to wait for all jobs to finish) and post it here, please.

Hm, but even with -qpa removed you still do use -eglfs flag earlier, so perhaps the issue is still there.

SoheilSabz

because of long time-consuming installation process I use the nohup command by this way:

nohup sh -c " sudo make -j2 && sudo make install "> /home/pi/Desktop/qt_inst.log /dev/null 2>&1 &

but I think it only ran the sudo make -j2 and don't runned the sudo make install so as you said that there is no error ( but what is for example make[2]: *** [sub-plugins-make_first] Error 2 and ...), I have run the sudo make install and by above configuration the result of make install is :

  m_surface = eglCreateWindowSurface(m_glIntegration->eglDisplay(), m_config, m_window, 0);
                                                                                 ^~~~~~~~
In file included from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/include/QtEglSupport/5.12.3/QtEglSupport/private/../../../../../src/platformsupport/eglconvenience/qt_egl_p.h:67:0,
                 from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/include/QtEglSupport/5.12.3/QtEglSupport/private/qt_egl_p.h:1,
                 from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl/qxcbeglinclude.h:49,
                 from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl/qxcbeglwindow.h:45,
                 from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl/qxcbeglwindow.cpp:40:
/opt/vc/include/EGL/egl.h:265:31: note:   initializing argument 3 of ‘void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)’
 EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
                               ^~~~~~~~~~~~~~~~~~~~~~
Makefile:2020: recipe for target '.obj/qxcbeglwindow.o' failed
make[7]: *** [.obj/qxcbeglwindow.o] Error 1
make[7]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl'
Makefile:58: recipe for target 'sub-xcb_egl-install_subtargets' failed
make[6]: *** [sub-xcb_egl-install_subtargets] Error 2
make[6]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations'
Makefile:174: recipe for target 'sub-gl_integrations-install_subtargets-ordered' failed
make[5]: *** [sub-gl_integrations-install_subtargets-ordered] Error 2
make[5]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
Makefile:114: recipe for target 'sub-xcb-install_subtargets' failed
make[4]: *** [sub-xcb-install_subtargets] Error 2
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
Makefile:116: recipe for target 'sub-platforms-install_subtargets' failed
make[3]: *** [sub-platforms-install_subtargets] Error 2
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:737: recipe for target 'sub-plugins-install_subtargets' failed
make[2]: *** [sub-plugins-install_subtargets] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:62: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase'
Makefile:95: recipe for target 'module-qtbase-install_subtargets' failed
make: *** [module-qtbase-install_subtargets] Error 2
pi@raspberrypi:~/MagPi $

Dose still the error came from the xcb and eglfs mismatch?

So i will try this configuration;

PKG_CONFIG_LIBDIR=/usr/lib/arm-linux-gnueabihf/pkgconfig:/usr/share/pkgconfig \
../qt-everywhere-src-5.12.3/configure -platform linux-rpi-g++ \
-v \
-opengl es2 \
-no-gtk \
-opensource -confirm-license -release \
-reduce-exports \
-force-pkg-config \
-nomake examples -no-compile-examples \
-skip qtwayland \
-skip qtwebengine \
-no-feature-geoservices_mapboxgl \
-qt-pcre \
-no-pch \
-ssl \
-evdev \
-system-freetype \
-fontconfig \
-glib \
-prefix /opt/Qt5.12 \
-qpa eglfs \
-qt-xcb

which i have removed -eglfs andthe output is:

ux-gnueabihf/libpulse.so /usr/lib/arm-linux-gnueabihf/libglib-2.0.so   
 => source accepted.

Trying source 0 (type pkgConfig) of library libresourceqt5 ...
+ /usr/bin/pkg-config --exists --silence-errors libresourceqt5
pkg-config did not find package.
  => source produced no result.

Cannot find libclang's main header file, candidate: /usr/lib/llvm-3.8/include/clang-c/Index.h.
Cannot find libclang's main header file, candidate: /usr/lib/llvm-3.8/include/clang-c/Index.h.
Done running configuration tests.

Configure summary:

Build type: linux-rpi-g++ (arm, CPU features: <none>)
Compiler: gcc 6.3.0
Configuration: use_gold_linker enable_new_dtags largefile shared rpath release c++11 c++14 concurrent dbus reduce_exports stl
Build options:
  Mode ................................... release
  Optimize release build for size ........ no
  Building shared libraries .............. yes
  Using C standard ....................... C11
  Using C++ standard ..................... C++14
  Using ccache ........................... no
  Using gold linker ...................... yes
  Using new DTAGS ........................ yes
  Using precompiled headers .............. no
  Using LTCG ............................. no
  Target compiler supports:
    NEON ................................. no
  Build parts ............................ libs tools
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... yes
  Qt Gui ................................. yes
  Qt Network ............................. yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. yes
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... yes
  udev ................................... yes
  Using system zlib ...................... yes
Qt Core:
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ yes
  GLib ................................... yes
  iconv .................................. no
  ICU .................................... yes
  Tracing backend ........................ <none>
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  Using system PCRE2 ..................... no
Qt Network:
  getifaddrs() ........................... yes
  IPv6 ifname ............................ yes
  libproxy ............................... no
  Linux AF_NETLINK ....................... yes
  OpenSSL ................................ yes
    Qt directly linked to OpenSSL ........ no
  OpenSSL 1.1 ............................ yes
  DTLS ................................... yes
  SCTP ................................... no
  Use system proxies ..................... yes
Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ yes
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. yes
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... yes
    PNG .................................. yes
      Using system libpng ................ yes
  EGL .................................... yes
  OpenVG ................................. yes
  OpenGL:
    Desktop OpenGL ....................... no
    OpenGL ES 2.0 ........................ yes
    OpenGL ES 3.0 ........................ yes
    OpenGL ES 3.1 ........................ yes
    OpenGL ES 3.2 ........................ yes
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... yes
  INTEGRITY HID .......................... no
  mtdev .................................. yes
  tslib .................................. yes
  xkbcommon .............................. yes
  X11 specific:
    XLib ................................. yes
    XCB Xlib ............................. yes
    EGL on X11 ........................... yes
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. yes
  EGLFS details:
    EGLFS OpenWFD ........................ no
    EGLFS i.Mx6 .......................... no
    EGLFS i.Mx6 Wayland .................. no
    EGLFS RCAR ........................... no
    EGLFS EGLDevice ...................... yes
    EGLFS GBM ............................ yes
    EGLFS VSP2 ........................... no
    EGLFS Mali ........................... no
    EGLFS Raspberry Pi ................... yes
    EGLFS X11 ............................ yes
  LinuxFB ................................ yes
  VNC .................................... yes
  Mir client ............................. no
  XCB:
    Using system-provided XCB libraries .. no
    XCB XKB .............................. yes
    XCB XInput ........................... yes
    Native painting (experimental) ....... yes
    GL integrations:
      GLX Plugin ......................... no
      EGL-X11 Plugin ..................... yes
Qt Sql:
  SQL item models ........................ yes
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows
Qt PrintSupport:
  CUPS ................................... yes
Qt Sql Drivers:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. yes
  OCI (Oracle) ........................... no
  ODBC ................................... yes
  PostgreSQL ............................. yes
  SQLite2 ................................ yes
  SQLite ................................. yes
    Using system provided SQLite ......... no
  TDS (Sybase) ........................... yes
Qt Testlib:
  Tester for item models ................. yes
Qt SerialBus:
  Socket CAN ............................. yes
  Socket CAN FD .......................... yes
Qt QML:
  QML network support .................... yes
  QML debugging and profiling support .... yes
  QML sequence object .................... yes
  QML list model ......................... yes
  QML XML http request ................... yes
  QML Locale ............................. yes
  QML delegate model ..................... yes
Qt Quick:
  Direct3D 12 ............................ no
  AnimatedImage item ..................... yes
  Canvas item ............................ yes
  Support for Qt Quick Designer .......... yes
  Flipable item .......................... yes
  GridView item .......................... yes
  ListView item .......................... yes
  TableView item ......................... yes
  Path support ........................... yes
  PathView item .......................... yes
  Positioner items ....................... yes
  Repeater item .......................... yes
  ShaderEffect item ...................... yes
  Sprite item ............................ yes
Qt Scxml:
  ECMAScript data model for QtScxml ...... yes
Qt Gamepad:
  SDL2 ................................... no
Qt 3D:
  Assimp ................................. yes
  System Assimp .......................... no
  Output Qt3D Job traces ................. no
  Output Qt3D GL traces .................. no
  Use SSE2 instructions .................. no
  Use AVX2 instructions .................. no
  Aspects:
    Render aspect ........................ yes
    Input aspect ......................... yes
    Logic aspect ......................... yes
    Animation aspect ..................... yes
    Extras aspect ........................ yes
Qt 3D Renderers:
  OpenGL Renderer ........................ yes
Qt 3D GeometryLoaders:
  Autodesk FBX ........................... no
Qt Bluetooth:
  BlueZ .................................. no
  BlueZ Low Energy ....................... no
  Linux Crypto API ....................... no
  WinRT Bluetooth API (desktop & UWP) .... no
Qt Sensors:
  sensorfw ............................... no
Qt Quick Controls 2:
  Styles ................................. Default Fusion Imagine Material Universal
Qt Quick Templates 2:
  Hover support .......................... yes
  Multi-touch support .................... yes
Qt Positioning:
  Gypsy GPS Daemon ....................... no
  WinRT Geolocation API .................. no
Qt Location:
  Qt.labs.location experimental QML plugin . yes
  Geoservice plugins:
    OpenStreetMap ........................ yes
    HERE ................................. yes
    Esri ................................. yes
    Mapbox ............................... yes
    MapboxGL ............................. no
    Itemsoverlay ......................... yes
QtXmlPatterns:
  XML schema support ..................... yes
Qt Multimedia:
  ALSA ................................... yes
  GStreamer 1.0 .......................... yes
  GStreamer 0.10 ......................... no
  Video for Linux ........................ yes
  OpenAL ................................. no
  PulseAudio ............................. yes
  Resource Policy (libresourceqt5) ....... no
  Windows Audio Services ................. no
  DirectShow ............................. no
  Windows Media Foundation ............... no
Qt Tools:
  QDoc ................................... no

WARNING: QDoc will not be compiled, probably because libclang could not be located. This means that you cannot build the Qt documentation.

Either ensure that llvm-config is in your PATH environment variable, or set LLVM_INSTALL_DIR to the location of your llvm installation.
On Linux systems, you may be able to install libclang by installing the libclang-dev or libclang-devel package, depending on your distribution.
On macOS, you can use Homebrew's llvm package.
On Windows, you must set LLVM_INSTALL_DIR to the installation path.

Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into '/opt/Qt5.12'.

Prior to reconfiguration, make sure you remove any leftovers from
the previous build.

Output of make -j2 is :

g++ -Wl,--no-undefined -Wl,-O1 -fuse-ld=gold -Wl,--enable-new-dtags -Wl,-z,origin -Wl,-rpath,\$ORIGIN/../../lib -shared -o libqminimalegl.so .obj/main.o .obj/qminimaleglintegration.o .obj/qminimaleglwindow.o .obj/qminimaleglscreen.o .obj/qminimaleglbackingstore.o  -L/opt/vc/lib -L/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/lib -lQt5EventDispatcherSupport /usr/lib/arm-linux-gnueabihf/libgthread-2.0.so /usr/lib/arm-linux-gnueabihf/libglib-2.0.so -lQt5FontDatabaseSupport /usr/lib/arm-linux-gnueabihf/libfontconfig.so /usr/lib/arm-linux-gnueabihf/libfreetype.so /usr/lib/arm-linux-gnueabihf/libz.so -lQt5EglSupport /usr/lib/arm-linux-gnueabihf/libXext.so /usr/lib/arm-linux-gnueabihf/libX11.so /usr/lib/arm-linux-gnueabihf/libm.so -lQt5Gui -lQt5Core -lbrcmGLESv2 -lbrcmEGL -lpthread /usr/lib/arm-linux-gnueabihf/libdl.so -lbrcmEGL -lbrcmGLESv2   
mv -f libqminimalegl.so ../../../../plugins/platforms/libqminimalegl.so
make[5]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/minimalegl'
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
Makefile:104: recipe for target 'sub-platforms-make_first' failed
make[3]: *** [sub-platforms-make_first] Error 2
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:725: recipe for target 'sub-plugins-make_first' failed
make[2]: *** [sub-plugins-make_first] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:50: recipe for target 'sub-src-make_first' failed
make[1]: *** [sub-src-make_first] Error 2
make[1]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase'
Makefile:83: recipe for target 'module-qtbase-make_first' failed
make: *** [module-qtbase-make_first] Error 2

Out put of the make install is here:

window.h:45,
                 from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl/qxcbeglwindow.cpp:40:
/opt/vc/include/EGL/egl.h:265:31: note:   initializing argument 3 of ‘void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)’
 EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
                               ^~~~~~~~~~~~~~~~~~~~~~
Makefile:2020: recipe for target '.obj/qxcbeglwindow.o' failed
make[7]: *** [.obj/qxcbeglwindow.o] Error 1
make[7]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl'
Makefile:58: recipe for target 'sub-xcb_egl-install_subtargets' failed
make[6]: *** [sub-xcb_egl-install_subtargets] Error 2
make[6]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations'
Makefile:174: recipe for target 'sub-gl_integrations-install_subtargets-ordered' failed
make[5]: *** [sub-gl_integrations-install_subtargets-ordered] Error 2
make[5]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
Makefile:114: recipe for target 'sub-xcb-install_subtargets' failed
make[4]: *** [sub-xcb-install_subtargets] Error 2
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
Makefile:116: recipe for target 'sub-platforms-install_subtargets' failed
make[3]: *** [sub-platforms-install_subtargets] Error 2
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:737: recipe for target 'sub-plugins-install_subtargets' failed
make[2]: *** [sub-plugins-install_subtargets] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:62: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase'
Makefile:95: recipe for target 'module-qtbase-install_subtargets' failed
make: *** [module-qtbase-install_subtargets] Error 2

Again i get the same erorr. Dose it need to run make clean beffor running ./configure ... ?

I think I must ask another question about which plugin is better between xcb and eglfs on raspberry qt native built installation, So I have asked here:

https://raspberrypi.stackexchange.com/questions/99667/which-plugin-is-better-between-xcb-and-eglfs-on-raspberry-qt-native-built-in

Thanks a lot.

sierdzio

You you have to always build in a clean environment. No artifacts from previous build. The easiest way to do so is to build in a separate directory.

Do you need to compile as root (sudo make)? That should not be necessary. In most cases there is also no need to install as root, you can install into your user directory.

Your output still does not show any error. Look earlier in the log and find where linker or compiler report an error message with dsecription of what and where has failed.

SoheilSabz

So i searched via the var/log files for Linux logs file to find out any error message by the command for example:

pi@raspberrypi:/var/log $ sudo grep -r 'Error 2' $PWD

but I don't find any massage.

Now I have seen this [bugreports from qt site](lhttps://bugreports.qt.io/browse/QTBUG-44998?page=com.atlassian.jira.plugin.system.issuetabpanels%3Acomment-tabpanel&showAll=true which have had somepartly the same make output like me:

Makefile:102: recipe for target 'sub-xcb-make_first' failed
make[4]: *** [sub-xcb-make_first] Error 2
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
Makefile:104: recipe for target 'sub-platforms-make_first' failed
make[3]: *** [sub-platforms-make_first] Error 2
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:725: recipe for target 'sub-plugins-make_first' failed
make[2]: *** [sub-plugins-make_first] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:50: recipe for target 'sub-src-make_first' failed
make[1]: *** [sub-src-make_first] Error 2

Where
So if it is not error for the third try by this configuration setting:

sudo PKG_CONFIG_LIBDIR=/usr/lib/arm-linux-gnueabihf/pkgconfig:/usr/share/pkgconfig \
../qt-everywhere-src-5.12.3/configure -platform linux-rpi-g++ \
-v \
-opengl es2  \
-no-gtk \
-opensource -confirm-license -release \
-reduce-exports \
-force-pkg-config \
-nomake examples -no-compile-examples \
-skip qtwayland \
-skip qtwebengine \
-no-feature-geoservices_mapboxgl \
-qt-pcre \
-no-pch \
-ssl \
-evdev \
-system-freetype \
-fontconfig \
-glib \
-prefix /opt/Qt5.12 \
-qt-xcb

i have this outpu:

Trying source 0 (type pkgConfig) of library libresourceqt5 ...
+ /usr/bin/pkg-config --exists --silence-errors libresourceqt5
pkg-config did not find package.
  => source produced no result.

Cannot find libclang's main header file, candidate: /usr/lib/llvm-3.8/include/clang-c/Index.h.
Cannot find libclang's main header file, candidate: /usr/lib/llvm-3.8/include/clang-c/Index.h.
Done running configuration tests.

Configure summary:

Build type: linux-rpi-g++ (arm, CPU features: <none>)
Compiler: gcc 6.3.0
Configuration: use_gold_linker enable_new_dtags largefile shared rpath release c++11 c++14 concurrent dbus reduce_exports stl
Build options:
  Mode ................................... release
  Optimize release build for size ........ no
  Building shared libraries .............. yes
  Using C standard ....................... C11
  Using C++ standard ..................... C++14
  Using ccache ........................... no
  Using gold linker ...................... yes
  Using new DTAGS ........................ yes
  Using precompiled headers .............. no
  Using LTCG ............................. no
  Target compiler supports:
    NEON ................................. no
  Build parts ............................ libs tools
Qt modules and options:
  Qt Concurrent .......................... yes
  Qt D-Bus ............................... yes
  Qt D-Bus directly linked to libdbus .... yes
  Qt Gui ................................. yes
  Qt Network ............................. yes
  Qt Sql ................................. yes
  Qt Testlib ............................. yes
  Qt Widgets ............................. yes
  Qt Xml ................................. yes
Support enabled for:
  Using pkg-config ....................... yes
  udev ................................... yes
  Using system zlib ...................... yes
Qt Core:
  DoubleConversion ....................... yes
    Using system DoubleConversion ........ yes
  GLib ................................... yes
  iconv .................................. no
  ICU .................................... yes
  Tracing backend ........................ <none>
  Logging backends:
    journald ............................. no
    syslog ............................... no
    slog2 ................................ no
  Using system PCRE2 ..................... no
Qt Network:
  getifaddrs() ........................... yes
  IPv6 ifname ............................ yes
  libproxy ............................... no
  Linux AF_NETLINK ....................... yes
  OpenSSL ................................ yes
    Qt directly linked to OpenSSL ........ no
  OpenSSL 1.1 ............................ yes
  DTLS ................................... yes
  SCTP ................................... no
  Use system proxies ..................... yes
Qt Gui:
  Accessibility .......................... yes
  FreeType ............................... yes
    Using system FreeType ................ yes
  HarfBuzz ............................... yes
    Using system HarfBuzz ................ no
  Fontconfig ............................. yes
  Image formats:
    GIF .................................. yes
    ICO .................................. yes
    JPEG ................................. yes
      Using system libjpeg ............... yes
    PNG .................................. yes
      Using system libpng ................ yes
  EGL .................................... yes
  OpenVG ................................. yes
  OpenGL:
    Desktop OpenGL ....................... no
    OpenGL ES 2.0 ........................ yes
    OpenGL ES 3.0 ........................ yes
    OpenGL ES 3.1 ........................ yes
    OpenGL ES 3.2 ........................ yes
  Vulkan ................................. no
  Session Management ..................... yes
Features used by QPA backends:
  evdev .................................. yes
  libinput ............................... yes
  INTEGRITY HID .......................... no
  mtdev .................................. yes
  tslib .................................. yes
  xkbcommon .............................. yes
  X11 specific:
    XLib ................................. yes
    XCB Xlib ............................. yes
    EGL on X11 ........................... yes
QPA backends:
  DirectFB ............................... no
  EGLFS .................................. yes
  EGLFS details:
    EGLFS OpenWFD ........................ no
    EGLFS i.Mx6 .......................... no
    EGLFS i.Mx6 Wayland .................. no
    EGLFS RCAR ........................... no
    EGLFS EGLDevice ...................... yes
    EGLFS GBM ............................ yes
    EGLFS VSP2 ........................... no
    EGLFS Mali ........................... no
    EGLFS Raspberry Pi ................... yes
    EGLFS X11 ............................ yes
  LinuxFB ................................ yes
  VNC .................................... yes
  Mir client ............................. no
  XCB:
    Using system-provided XCB libraries .. no
    XCB XKB .............................. yes
    XCB XInput ........................... yes
    Native painting (experimental) ....... yes
    GL integrations:
      GLX Plugin ......................... no
      EGL-X11 Plugin ..................... yes
Qt Sql:
  SQL item models ........................ yes
Qt Widgets:
  GTK+ ................................... no
  Styles ................................. Fusion Windows
Qt PrintSupport:
  CUPS ................................... yes
Qt Sql Drivers:
  DB2 (IBM) .............................. no
  InterBase .............................. no
  MySql .................................. yes
  OCI (Oracle) ........................... no
  ODBC ................................... yes
  PostgreSQL ............................. yes
  SQLite2 ................................ yes
  SQLite ................................. yes
    Using system provided SQLite ......... no
  TDS (Sybase) ........................... yes
Qt Testlib:
  Tester for item models ................. yes
Qt SerialBus:
  Socket CAN ............................. yes
  Socket CAN FD .......................... yes
Qt QML:
  QML network support .................... yes
  QML debugging and profiling support .... yes
  QML sequence object .................... yes
  QML list model ......................... yes
  QML XML http request ................... yes
  QML Locale ............................. yes
  QML delegate model ..................... yes
Qt Quick:
  Direct3D 12 ............................ no
  AnimatedImage item ..................... yes
  Canvas item ............................ yes
  Support for Qt Quick Designer .......... yes
  Flipable item .......................... yes
  GridView item .......................... yes
  ListView item .......................... yes
  TableView item ......................... yes
  Path support ........................... yes
  PathView item .......................... yes
  Positioner items ....................... yes
  Repeater item .......................... yes
  ShaderEffect item ...................... yes
  Sprite item ............................ yes
Qt Scxml:
  ECMAScript data model for QtScxml ...... yes
Qt Gamepad:
  SDL2 ................................... no
Qt 3D:
  Assimp ................................. yes
  System Assimp .......................... no
  Output Qt3D Job traces ................. no
  Output Qt3D GL traces .................. no
  Use SSE2 instructions .................. no
  Use AVX2 instructions .................. no
  Aspects:
    Render aspect ........................ yes
    Input aspect ......................... yes
    Logic aspect ......................... yes
    Animation aspect ..................... yes
    Extras aspect ........................ yes
Qt 3D Renderers:
  OpenGL Renderer ........................ yes
Qt 3D GeometryLoaders:
  Autodesk FBX ........................... no
Qt Bluetooth:
  BlueZ .................................. no
  BlueZ Low Energy ....................... no
  Linux Crypto API ....................... no
  WinRT Bluetooth API (desktop & UWP) .... no
Qt Sensors:
  sensorfw ............................... no
Qt Quick Controls 2:
  Styles ................................. Default Fusion Imagine Material Universal
Qt Quick Templates 2:
  Hover support .......................... yes
  Multi-touch support .................... yes
Qt Positioning:
  Gypsy GPS Daemon ....................... no
  WinRT Geolocation API .................. no
Qt Location:
  Qt.labs.location experimental QML plugin . yes
  Geoservice plugins:
    OpenStreetMap ........................ yes
    HERE ................................. yes
    Esri ................................. yes
    Mapbox ............................... yes
    MapboxGL ............................. no
    Itemsoverlay ......................... yes
QtXmlPatterns:
  XML schema support ..................... yes
Qt Multimedia:
  ALSA ................................... yes
  GStreamer 1.0 .......................... yes
  GStreamer 0.10 ......................... no
  Video for Linux ........................ yes
  OpenAL ................................. no
  PulseAudio ............................. yes
  Resource Policy (libresourceqt5) ....... no
  Windows Audio Services ................. no
  DirectShow ............................. no
  Windows Media Foundation ............... no
Qt Tools:
  QDoc ................................... no

WARNING: QDoc will not be compiled, probably because libclang could not be located. This means that you cannot build the Qt documentation.

Either ensure that llvm-config is in your PATH environment variable, or set LLVM_INSTALL_DIR to the location of your llvm installation.
On Linux systems, you may be able to install libclang by installing the libclang-dev or libclang-devel package, depending on your distribution.
On macOS, you can use Homebrew's llvm package.
On Windows, you must set LLVM_INSTALL_DIR to the installation path.

Qt is now configured for building. Just run 'make'.
Once everything is built, you must run 'make install'.
Qt will be installed into '/opt/Qt5.12'.

And for make command this output:

/opt/vc/include/EGL/egl.h:265:31: note:   initializing argument 3 of ‘void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)’
 EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
                               ^~~~~~~~~~~~~~~~~~~~~~
Makefile:2020: recipe for target '.obj/qxcbeglwindow.o' failed
make[7]: *** [.obj/qxcbeglwindow.o] Error 1
make[7]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl'
Makefile:46: recipe for target 'sub-xcb_egl-make_first' failed
make[6]: *** [sub-xcb_egl-make_first] Error 2
make[6]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations'
Makefile:150: recipe for target 'sub-gl_integrations-make_first-ordered' failed
make[5]: *** [sub-gl_integrations-make_first-ordered] Error 2
make[5]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
Makefile:102: recipe for target 'sub-xcb-make_first' failed
make[4]: *** [sub-xcb-make_first] Error 2
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
Makefile:104: recipe for target 'sub-platforms-make_first' failed
make[3]: *** [sub-platforms-make_first] Error 2
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:725: recipe for target 'sub-plugins-make_first' failed
make[2]: *** [sub-plugins-make_first] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:50: recipe for target 'sub-src-make_first' failed
make[1]: *** [sub-src-make_first] Error 2
make[1]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase'
Makefile:83: recipe for target 'module-qtbase-make_first' failed
make: *** [module-qtbase-make_first] Error 2

The total make output file in pastabin :

https://www.pastabin.ml/2DZ2fbK2SV

which is the same with the previuse try. the make install output is here:

make[4]: Entering directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
cd minimal/ && ( test -e Makefile || /home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -o Makefile /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/minimal/minimal.pro ) && make -f Makefile install
make[5]: Entering directory '/home/pi/Desktop/qt-raspberrypi-
make[5]: Entering directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
cd xcb-static/ && ( test -e Makefile || /home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -o Makefile /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/xcb-static/xcb-static.pro ) && make -f Makefile install
make[6]: Entering directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/xcb-static'
make[6]: Nothing to be done for 'install'.
make[6]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/xcb-static'
( test -e Makefile.xcb_qpa_lib || /home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -o Makefile.xcb_qpa_lib /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/xcb_qpa_lib.pro ) && make -f Makefile.xcb_qpa_lib install
make[6]: Entering directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -install 
make[6]: Entering directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -install qinstall -exe ../../../../plugins/platforms/libqxcb.so /opt/Qt5.12/plugins/platforms/libqxcb.so
strip --strip-unneeded /opt/Qt5.12/plugins/platforms/libqxcb.so
/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -install qinstall /home/pi/Desktop/qt-raspberrypi-configuration/qtbase/lib/cmake/Qt5Gui/Qt5Gui_QXcbIntegrationPlugin.cmake /opt/Qt5.12/lib/cmake/Qt5Gui/Qt5Gui_QXcbIntegrationPlugin.cmake
make[6]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
cd gl_integrations/ && ( test -e Makefile || /home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -o Makefile /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/gl_integrations/gl_integrations.pro ) && make -f Makefile install
make[6]: Entering directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations'
cd xcb_egl/ && ( test -e Makefile || /home/pi/Desktop/qt-raspberrypi-configuration/qtbase/bin/qmake -o Makefile /home/pi/Desktop/qt-everywhere-
                                                                                 ^~~~~~~~
In file included from /home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase
 EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
                               ^~~~~~~~~~~~~~~~~~~~~~
Makefile:2020: recipe for target '.obj/qxcbeglwindow.o' failed
make[7]: *** [.obj/qxcbeglwindow.o] Error 1
make[7]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl'
Makefile:58: recipe for target 'sub-xcb_egl-install_subtargets' failed
make[6]: *** [sub-xcb_egl-install_subtargets] Error 2
make[6]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb/gl_integrations'
Makefile:174: recipe for target 'sub-gl_integrations-install_subtargets-ordered' failed
make[5]: *** [sub-gl_integrations-install_subtargets-ordered] Error 2
make[5]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms/xcb'
Makefile:114: recipe for target 'sub-xcb-install_subtargets' failed
make[4]: *** [sub-xcb-install_subtargets] Error 2
make[4]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins/platforms'
Makefile:116: recipe for target 'sub-platforms-install_subtargets' failed
make[3]: *** [sub-platforms-install_subtargets] Error 2
make[3]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src/plugins'
Makefile:737: recipe for target 'sub-plugins-install_subtargets' failed
make[2]: *** [sub-plugins-install_subtargets] Error 2
make[2]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase/src'
Makefile:62: recipe for target 'sub-src-install_subtargets' failed
make[1]: *** [sub-src-install_subtargets] Error 2
make[1]: Leaving directory '/home/pi/Desktop/qt-raspberrypi-configuration/qtbase'
Makefile:95: recipe for target 'module-qtbase-install_subtargets' failed
make: *** [module-qtbase-install_subtargets] Error 2

The total make install output file in pastabin :

https://www.pastabin.ml/av4wZnXbws

I have asked a similar question here:

https://unix.stackexchange.com/questions/525566/makes-errors-in-native-build-qt-installtion

sierdzio

@SoheilSabz said in Failure to build QT5 5.12.3 on Raspberry Pi zero:

sudo grep -r 'Error 2' $PWD

Rather grep for Error: or just error or something. This "Error 2" stuff tells me nothing - it is just an indication in make that an actual error has occurred earlier. Maybe post the whole make output to pastebin?

SoheilSabz

I have added the total output of make and make install scripts via pastabin site links into the above. ( but pastabin have had size limitation and I forced to cut some part s of it)

sierdzio

Thanks. The error is:

/home/pi/Desktop/qt-everywhere-src-5.12.3/qtbase/src/plugins/platforms/xcb/gl_integrations/xcb_egl/qxcbeglwindow.cpp:96:81: error: invalid conversion from ‘xcb_window_t {aka unsigned int}’ to ‘EGLNativeWindowType {aka void*}’ [-fpermissive]
     m_surface = eglCreateWindowSurface(m_glIntegration->eglDisplay(), m_config, m_window, 0);
                                                                                 ^~~~~~~~

See a possible solution here: https://forum.qt.io/topic/103021/build-qt5-9-1-error-invalid-conversion-from-xcb_window_t-aka-unsigned-int-to-eglnativewindowtype-aka-void-fpermissive/4

Perhaps RPi Zero is too old for this, though...

RahibeMeryem

@sierdzio said in Failure to build QT5 5.12.3 on Raspberry Pi zero:

https://forum.qt.io/topic/103021/build-qt5-9-1-error-invalid-conversion-from-xcb_window_t-aka-unsigned-int-to-eglnativewindowtype-aka-void-fpermissive/4

@sierdzio

did you solve the error problem. I have same problem here with qt5.13.2 on the rpi4+

sierdzio

@RahibeMeryem said in Failure to build QT5 5.12.3 on Raspberry Pi zero:

@sierdzio said in Failure to build QT5 5.12.3 on Raspberry Pi zero:

https://forum.qt.io/topic/103021/build-qt5-9-1-error-invalid-conversion-from-xcb_window_t-aka-unsigned-int-to-eglnativewindowtype-aka-void-fpermissive/4

@sierdzio

did you solve the error problem. I have same problem here with qt5.13.2 on the rpi4+

It wasn't me who had the problem :-)

I haven't compiled Qt on/for Raspberry Pi in a long while, so I can't comment. Also, I don't have RPI4 yet.

RahibeMeryem

@SoheilSabz

Hi Did you solve your problem ? I have same here..