Qt build for Raspberry Pi 3 on Windows 10 using mingw32, gcc and raspberry-gcc6.3.0-r3 fails

[Napi]

@koahnig

It looks like the libs get loaded but there is something wrong with libQt5Core.

gdb qtdiag
GNU gdb (Raspbian 7.12-6) 7.12.0.20161007-git
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from qtdiag...(no debugging symbols found)...done.
(gdb) r
Starting program: /usr/local/qt5/bin/qtdiag 
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".

Program received signal SIGILL, Illegal instruction.
0xb610cb30 in qRegisterResourceData(int, unsigned char const*, unsigned char const*, unsign
ed char const*) () from /usr/local/qt5/lib/libQt5Core.so.5

[koahnig]

@Napi

The only idea Ihave at the time being would be to create a simple console app based on the creator template and do also a simple hello world output. This would be very basic again, but also involve a minimum Qt.

When it fails too, there is something fundamental with Qt cross-compile.

As explained before, all this is outside of my experience. I am trying to get someone else interested to have a look here.

[Napi]

@koahnig

Thank you so much for your help so far!
I think I am going to start by only building qt-base, which I am then going to use as a starting point for a simple app.

Here is a link with the exact steps I did, just in case Iink.

[koahnig]

@Napi

Certainly stepping back in complexity shall help.

The cross-compile on Windows for linux and/or embedded linux is possible, but requires a bit more steam to get around all the obstacles.

[Napi]

@koahnig
So I managed to compile qtBase, but now it seems that dependencies are missing. I was trying to run
./examples/gui/analogclock/analogclock , this is the error message I get:

qt.qpa.plugin: Could not find the Qt platform plugin "xcb" in ""
qt.qpa.plugin: Could not find the Qt platform plugin "eglfs" in ""
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

I tried the following:

export QT_QPA_PLATFORM=eglfs
export QT_QPA_PLATFORM_PLUGIN_PATH=/usr/local/qt5/plugins/platforms
export LD_LIBRARY_PATH=/usr/local/qt5/lib
sudo ldconfig

[koahnig]

@Napi

Try to compile a very basic program using Qt. Use the Qt console template fromQt creator and compile and run on RPi without any modifications. This should work IMHO.

Are you using Qt creator?

When the very basic console application does not work, you have fundamental issue there. From having no additions at all, you can implement complexity step-by-step (e.g. qDebug() and so on).

Afterwards you can worry about the additional modules required. The problem is that this might become quite tedious.

[Napi]

@koahnig

So I did a build using the Qt Creator and the Qt Console Application template and it worked fine.

I also tried the AnalogClock example afterwards, whit no success. There might be some issue with OpenGl or the renderer in general.

Update: I got the example running !!!!!! Yeah !!! I did a rebuild off the whole qt base without using the batch file for configuring!

[Napi]

So one issue that I have now is the fact that some paths on the raspberry qt build are wrong, someting wasn't right during configuring. This is the error I get running the 2dpainting example.

The interesting thing here is, that QFontDatabase url is strange, I ran the following configure command:

../qt-everywhere-src-5.11.2/qtbase/configure -platform win32-g++ -device linux-rasp-pi-g++ -release -sysroot C:/SysGCC/raspberry/arm-linux-gnueabihf/sysroot -prefix /usr/local/qt5 -device-option "CROSS_COMPILE=arm-linux-gnueabihf-" -opensource -confirm-license -opengl es2 -no-use-gold-linker -make libs

[koahnig]

@Napi

Congrats for your progress.

You are right that the URL is strange.
I have just scanned through the source of Qt5.11.2 as shipped with a MinGW pre-built. The given text is part of c:\Qt\5.11.2\Src\qtbase\src\platformsupport\fontdatabases\freetype\qfreetypefontdatabase.cpp

However opening the URL brings up a site with that name, but it is not really what I expected. First of all it is in French and it does not hold direct information with respect to fonts.

[koahnig]

@Napi

Some information from Qt on fondconfig https://doc.qt.io/qt-5/qt-embedded-fonts.html

Here is a Qt reference to dejavu fonts http://doc-snapshots.qt.io/qt5-5.12/qtgui-attribution-dejayvu.html
This points to https://dejavu-fonts.github.io/ which makes sense compared to the strange URL.

[edit: koahnig form here]
Digging a bit deeper and checked current Qt5.12.0 source holding this:

    if (!dir.exists()) {
        qWarning("QFontDatabase: Cannot find font directory %s.\n"
                 "Note that Qt no longer ships fonts. Deploy some (from https://dejavu-fonts.github.io/ for example) or switch to fontconfig.",
                 qPrintable(fontpath));
        return;

In up-coming release the correct link is referenced.

[koahnig]

Also the source contained in today's release Qt5.11.3 has the github.io reference. Checked with MinGW pre-built.

[Napi]

@koahnig

I am trying version 5.12.0 now. Thank you!

[FluxDice]

@koahnig and @Napi
I am somewhat of a noob and looking this work. Are there instructions you followed to the get this to work?

Thank you very much for you help.

[koahnig]

@FluxDice

Hi and welcome to devnet forum

Here is a link to the Qt documentation for cross compiling.
https://doc.qt.io/qt-5/embedded-linux.html

For raspberry specifically there is also https://www.raspberrypi.org/forums/viewtopic.php?t=204778