Json-string inside a qml function possible?

JKSH

@Sam009 said in Json-string inside a qml function possible?:

But i can define the jsonString inside the function and the var JsonObject = JSON.parse(jsonString); is outside the function? (in another fucntion)

Yes you can.

Thx i will try this.

You're welcome. Good luck!

Sam009

@JKSH

Yes this works, thx.

A smal question: How to define a Jason string array in qml. and also how to call it later. For example the first elment with his content?
Give it in qml a for loop , for the Jason string array?

JKSH

@Sam009 said in Json-string inside a qml function possible?:

A smal question: How to define a Jason string array in qml. and also how to call it later. For example the first elment with his content?
Give it in qml a for loop , for the Jason string array?

Hi, I'm don't quite understand your question. Can you show an example of what you want?

Sam009

@JKSH
I will create a json array and there i will save multipe elements. And this elments i will call later to get the content of the first element, or the second. But if i do this (code) i get the error JSON.parse: Parse error. How i can fix this and also is it possiblel to create a array in that way?

function add(){
.......................
................

switch (listrythmus.rh1) {
case 1: settings.jsonString[settings.jsonid] = '{"Rythmusname": "1", "URL1": "url1", "URL2":"url2","URL3": "url3"}'; break;
case 2: settings.jsonString[settings.jsonid] = '{"Rythmusname": "2 string", "URL1": "url1", "URL2":"url2","URL3": "url3"}'; break;
case 3: settings.jsonString[settings.jsonid] = '{"Rythmusname": "3", "URL1": "url1", "URL2":"url2","URL3": "url3"}'; break;
case 4: settings.jsonString[settings.jsonid] = '{"Rythmusname": "4", "URL1": "url1", "URL2":"url2","URL3": "url3"}'; break;
case 5: settings.jsonString[settings.jsonid] = '{"Rythmusname": "5", "URL1": "url1", "URL2":"url2","URL3": "url3"}'; break;
case 6: settings.jsonString[settings.jsonid] = '{"Rythmusname": "6", "URL1": "url1", "URL2":"url2","URL3": "url3"}'; break;
default: pluginDialog.close(); break;
}
jsonStringfunctheory()
console.log(settings.jsonString)

}
function jsonStringfunc{
Component.onCompleted; {
var JsonObject= JSON.parse(settings.jsonString);
//Error JSON.parse: Parse error
for(var i=0;i<settings.jsonid;i++){

				//retrieve values from JSON again
				var aString = JsonObject.Rythmusname[settings.jsonid];
				var bString = JsonObject.URL1[settings.jsonid];
				var cString = JsonObject.URL2[settings.jsonid];
				var dString = JsonObject.URL3[settings.jsonid];

                                    /*var aString = settings.jsonString.Rythmusname[settings.jsonid];
				var bString = settings.jsonString.URL1[settings.jsonid];
				var cString = settings.jsonString.URL2[settings.jsonid];
				var dString = settings.jsonString.URL3[settings.jsonid];*/

				console.log(aString)
				console.log(bString)
				console.log(cString)
				console.log(dString)                                    }
                                  }	
                                 settings.jsonid ++
                                update(Dialog)
                                }

jsonid is a extern variable store in the settings. it is the index.

JKSH

@Sam009 said in Json-string inside a qml function possible?:

settings.jsonString[settings.jsonid] = '{"Rythmusname": "1", "URL1": "url1", "URL2":"url2","URL3": "url3"}';

Well, even though you named your variable jsonString, you did not create a string. You created an array.

You cannot pass an array into JSON.parse(); you can only pass a string.

Make sure you understand this:

// v1 is an array
var v1 = [];
v1[0] = 42;
v1[1] = "Hello";

// v2 is a string
var v2 = '[42, "Hello"]';

// v3 is an array that is has the same value as v1
var v3 = JSON.parse(v2);

Anyway, let's step back first: Why do you want to create JSON strings? Why not just use plain JavaScript objects and JavaScript arrays?

Sam009

@JKSH
The idea is to create many elements with tag like URL1: "...." and this has different links etc..Also the name of the tag can by change and the number of tags this since I will make one element with "Rythmusname": "1", "URL1": "url1", "URL2":"url2","URL3": "url3" and a second "Typename": "1", "notename": "1", "URL1": "url1", "URL2":"url2","URL3": "url3". And I don´t know how to store this. So was the idea to create a Jason array/string that has all this and I will make a set of object that I can call later into an outer function. But I can only make one time the JSON. parse () and so a second so a second element get not store. (that was the idea to make an array and so it was "easier" to call a set/object with JsonObject.URL1 [id of the set]) But this don´t work give it a better solution?
{
"id": 1,
"Typename": "1"
"notename": "2"
"URL1": "url1",
"URL2":"url2",
"URL3": "url3"
},
{
"id": 2,
"Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
},
{
"id": 3,
Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
}
Or is it better to create more Json to store the different content, so that I have one for Rythmusname and Typename/notename. Into the settings I make the property very jsonString: [] them into the function I call it. But this is wrong since JSON. parse (v2) will create an Array of string (v2), if I understand the example with v3. Then I change jsonString: [] to jsonString. But then I can´t store more as one object/set.
How I can make that it store more elements that I can call later by here Id?I hope it is understandable, and I'm sorry for the many questions.

JKSH

You don't need JSON strings for this.

@Sam009 said in Json-string inside a qml function possible?:

{
"id": 1,
"Typename": "1"
"notename": "2"
"URL1": "url1",
"URL2":"url2",
"URL3": "url3"
},
{
"id": 2,
"Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
}

var obj1 = {};
obj1["id"] = 1; // NOTE: This is the same as ` obj1.id = 1`
obj1["Typename"] = "1";
obj1["notename"] = "2";
obj1["URL1"] = "url1";
obj1["URL2"] = "url2";
obj1["URL3"] = "url3";

var obj2 = {};
obj2["id"] = 2;
obj2["Rythmusname"] = "Rythmusname";
obj2["Url1"] = "1";
obj2["Url2"] = "2";
obj2["Url3"] = "3";

console.log(obj1.Typename)
console.log(obj2.Rhythmusname)

Sam009

@JKSH
Ok and how I can it dynamically so that it can create more as 1 from the same. Since the idea is to create a X of number of them and save this. And later call them individually. (without to create multiple obj1... or jsaonstring)
If a I create a 2 theory then the previous information is not overwritten.
I've done it with Json-string, but I can only do one time "var JsonObject = JSON.parse (settings.jsonString);" , and if i set a 2 element (2 theorie) is no longer saved.
How do I can create more than one element of theorie and save it?

JKSH

@Sam009 said in Json-string inside a qml function possible?:

Ok and how I can it dynamically so that it can create more as 1 from the same. Since the idea is to create a X of number of them and save this. And later call them individually. (without to create multiple obj1... or jsaonstring)
If a I create a 2 theory then the previous information is not overwritten.
I've done it with Json-string, but I can only do one time "var JsonObject = JSON.parse (settings.jsonString);" , and if i set a 2 element (2 theorie) is no longer saved.
How do I can create more than one element of theorie and save it?

I'm sorry, I don't understand your description.

Here's a way to dynamically create Objects and put them into Arrays. I hope it helps:

Code

var array = [];
for (var i = 0; i < 3; ++i)
{
    var obj = {};
    obj["id"] = i;
    obj["url"] = "url" + i;

    array.push(obj);
}

console.log(array)

Output

[ { id: 0, url: 'url0' },
  { id: 1, url: 'url1' },
  { id: 2, url: 'url2' } ]

zixuan

Based on the answer of JKSH, it is not a valid string so you need to log this.

Sam009

@JKSH
---- First create an Object, then parse into a Json.------------------

if i make a object like :
objRhytmus["id"] = 12; objRhytmus["Rythmusname"] = "th1"; objRhytmus["URL1"] = "Link"; objRhytmus["URL2"] = "Link"; objRhytmus["URL3"] = "Link";

Then var json2 = JSON.stringify(objRhytmus); this object is now a Json-string and how i can call the emelent "id" with objRhytmus["id"]
Then i make a JSON.parse(json2) . to get a Json-string, but is this still like this:
[
{
"id": 1,
"Typename": "1"
"notename": "2"
"URL1": "url1",
"URL2":"url2",
"URL3": "url3"
},
{
"id": 2,
"Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
},
{
"id": 3,
Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
}
]

And if i call the id of one set then i can get the whole set with this id, or is it now a string?
But can I make this multiple time so that the previously element is still there and not override. Or how i can do that i have more as one set of this object/set?

JKSH

@Sam009 said in Json-string inside a qml function possible?:

This is the first part of your code:

if i make a object like :
objRhytmus["id"] = 12; objRhytmus["Rythmusname"] = "th1"; objRhytmus["URL1"] = "Link"; objRhytmus["URL2"] = "Link"; objRhytmus["URL3"] = "Link";

This is the 2nd part of your code:

Then var json2 = JSON.stringify(objRhytmus); this object is now a Json-string and how i can call the emelent "id" with objRhytmus["id"]
Then i make a JSON.parse(json2) . to get a Json-string, but is this still like this:
[
{
"id": 1,
"Typename": "1"
"notename": "2"
"URL1": "url1",
"URL2":"url2",
"URL3": "url3"
},
{
"id": 2,
"Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
},
{
"id": 3,
Rythmusname": "Rythmusname"
"Url1": "1"
"Url2": "2"
"Url3": "3"
}
]

Can you please update your example? Make the first part match the second part. Otherwise, it is difficult for me to understand what you want.

Sam009

@JKSH
Hi, I'm sorry for the late answer. Thanks for your help, I find out a solution. And for the moment it works :) I made an "object array" obj [n] = {"id": Val, "url": "url"}And n is the value of the id., and it is the set number.
And if I will set a new element to this val I take the val of id and put the new element (the with different element names.) on it. obj[n] = { "id" : val, "url2": "url"}. so at the object with the id = x get a new value.
And I use jsonstring = JSON. stringify (obj); to make a json object of all object[].